LEGO 60292 Town Center

LEGO Audio & Braille Building Instructions for the LEGO City set "Town Center".

The LEGO City town center is bustling with activity. Shirley Keeper has arrived in her truck to pick up the recycling containers, the police are chasing a crook and a firefighter is battling a blaze at the pizza restaurant. Check out the cool amenities! There's a car wash, EV charging station and a park with a kids' ride. You can even visit a dojo to learn martial arts... awesome!
The box cover shows the whole town center in all its facets. In the very middle is a road junction: one road with two lanes is running from the front left corner towards the back, and a side road (also with two lanes as well as a crosswalk) is crossing in the middle towards the right. The blind townsman with guide dog is actually just crossing the street on the crosswalk, coming from the pizza restaurant called "CITY PIZZA" and martial arts dojo called "DRAGON DOJO" in the right back. It looks like he is headed towards the small park with kids' ride in the front right! Maybe he wants to have a little chat with the townswoman who is sitting on the park bench while her baby is having fun in the ride. To the right of the park, the firefighter motorcycle is parked. Wait, what is it doing there? Oh, the firefighter is actually trying to put out a small fire in the storage shed of the pizza restaurant! Good thing she got there in time! Meanwhile, the pizza chef is handing a pizza box to a child. Oh, this is actually Madison, a keen martial arts student! She probably needs a snack before her lesson in the Dragon Dojo that is located on the first floor above the pizza restaurant. In the very front, the crook is fleeing from the policeman who is following him closely on his police bicycle. It seems like the crook has stolen a pizza! On the left section of the box cover is the car wash with EV charging station. The name of the car wash is "Octan". The electric car, driven by the martial arts instructor, has just been recharged and is now ready to hit the road. Shirley Keeper is standing in the middle of the road; she is busy loading the crane truck with the recycling containers for paper and glass. The recycling container station and the crane truck are at the left back of the box cover, the blue container for paper is currently dangling in midair on the crane arm. Shirley Keeper has it all under control with her remote control. Let's get started!
Open the box. This can be tricky; ask someone to help you!
The box contains a total of 13 plastic bags: 10 plastic bags with numbers on them, and 3 plastic bags without numbers. 1 unnumbered bag contains the 5 booklets with visual building instructions and the sticker sheet. The other 2 unnumbered plastic bags contain the road plates for the town center and other large-sized plates. The 10 plastic bags with numbers contain the other bricks and pieces for building this amazing set. Ask a sighted person to help you find the correct bags when needed!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the firefighter Minifigure, the firefighter motorcycle, the martial arts instructor Minifigure, the electric car, the crook Minifigure, the policeman Minifigure, the police bicycle and the EV charging station. This bag also contains the famous LEGO brick separator. It is a handy tool to separate pieces that you have mounted already. Use it as you see fit.


Additionally, open the two unnumbered bags. They contain road plates and other large plates that you will need throughout the entire build.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we will build the firefighter Minifigure.

Collect the following 2 pieces:
1 black pair of legs,
and 1 black and dark stone grey upper part of the body.
Put the upper body on top of the legs.
Collect the following 2 pieces:
1 white safety helmet,
and 1 bright yellow head.
Put the head on top.
Put the helmet on top.
Find 1 transparent brown helmet visor.
Snap the two small bumps on the inside of the visor into the two notches on the helmet.
The firefighter Minifigure is finished! Great job! The firefighter has a fierce grin on her face. It looks like she is afraid of nothing! There are ash smudges on her face. Her uniform is dark grey with neon green reflective stripes on knees and chest. She is wearing a harness and is equipped with a trigger hook and a gauge.

Next, we will build the firefighter motorcycle.

Find 1 black motorcycle frame.
Put it horizontally on the table, two horizontal forks to the left, the forks that are pointing from top to bottom to the right.
Find 1 bright red motorcycle fairing.
Put it horizontally on top, the 2 top knobs of the fairing on the left.
Find 1 silver metallic handlebar with bottom shaft.
Snap the bottom shaft into the clasp pointing to the top on the right half of the motorcycle.
Continue if you want to decorate this piece with 2 stickers now. If not, skip the next 5 sentences.
Find 1 zig-zag shaped sticker number 12. Ask a sighted person to help you find the correct sticker.
Put it on the front side surface, the sticker form fits the silhouette of the motorcycle fairing.
This sticker is blazing red with a bright yellow print on it: it shows the emblem of the fire brigade which is a bright yellow silhouette of a badge with a bright yellow flame in the center. At the bottom, there is a horizontal bright yellow line with red writing in it: "Fire 0 2". In the top tip of the sticker, there is a small black wing.
Find 1 zig-zag shaped sticker number 11. Ask a sighted person to help you find the correct sticker.
Put it on the back side surface of the motorcycle fairing. It has the same print as the previous sticker.
Now, we will make a small part.
First, turn the motorcycle left to right. This means the handle is now on the left, and the two knobs are on the right.
Collect the following 2 pieces:
1 bright red plate 1x2 with top clasp,
and 1 white round plate 1x1.
Put the plate with clasp horizontally on the table, clasp to the left.
Put the round plate 1x1 on the knob of the previous piece.
Find 1 transparent blue round tile 1x1.
Put it on top of the previous piece.
Mount this part horizontally on the two knobs on the right, clasp to the left.

Now, we will assemble the 2 motorcycle wheels. Let's start with one.

Collect the following 2 pieces:
1 silver metallic motorcycle rim with pins and spokes,
and 1 black motorcycle tire with high profile.
Put the tire around the rim.
Find another rim and another tire.
Assemble the second wheel just like the first one.
Snap the wheel pins into the forks at the bottom of the motorcycle.
Now, let's make the hand-held fire extinguisher.
Collect the following 2 pieces:
1 transparent light blue round plate 1x1,
and 1 white and dark stone grey shooter with shaft, knob and trigger.
Put the round plate 1x1 into the opening at the back of the shooter.
Snap the handle of the fire extinguisher into the clasp on the motorcycle.
The firefighter motorcycle is finished! Well done! Now the firefighter can go on her first mission and take care of some fire hazards!

Next, we build the martial arts instructor Minifigure.

Collect the following 3 pieces:
1 white and earth blue upper part of the body,
1 earth blue and white pair of legs,
and 1 bright yellow head.
Assemble the Minifigure: put the upper body on the legs, and put the head on top.
Find 1 medium stone grey hairpiece with receding hairline and sideburns.
Put it on the head.
The martial arts instructor Minifigure is finished! He has grey hair and a grey jawline beard. His face is very friendly! He is wearing a traditional martial arts uniform: the uniform is white with a brown stomach binder and a dark blue chest shield as well as dark blue thigh protectors. The instructor can practice some of his moves until the martial arts dojo is finished.

Now, we build the electric car.

Collect the following 2 pieces:
1 black car bottom 4x7 with base plate 3x4 and two bearing plates 2x2,
and 1 dark azure blue plate 2x2.
Put the car chassis 4x7 horizontally on the table.
Put the plate 2x2 on the four knobs on the right.
Find 2 dark azure blue plates 1x3.
Put 1 horizontally on the backmost row.
Repeat symmetrically at the front.
Collect the following 2 pieces:
1 black and medium stone grey small steering wheel with plate 1x2,
and 1 dark azure blue plate 2x2.
Put the plate 2x2 on the four knobs on the left.
Put the small steering wheel vertically to the right of the previous piece, steering wheel to the right.
Collect the following 2 pieces:
1 bright blue right door 1x3,
and 1 bright blue left door 1x3.
Put the right door 1x3 horizontally on the backmost row. Make sure the small door handle is pointing to the back, and the top knob of the piece is on the left. If this does not add up, try the other door.
Repeat symmetrically at the front.
Find 2 bright blue mudguard plates 2x4 with middle hole.
Put 1 vertically centered on the two rightmost columns. Centered means that the piece is symmetrically overhanging to the front and back.
Repeat symmetrically on the left.
Collect the following 2 pieces:
1 medium stone grey top angle plate 1x2 - 2x4 with 8 side knobs,
and 1 transparent red plate 1x2.
Put the angle plate vertically centered on the leftmost row, side knobs overhanging to the left.
Put the plate 1x2 vertically centered on the rightmost column.
Collect the following 3 pieces:
2 transparent light blue round plates 1x1,
and 1 bright blue plate 1x2 with 1 knob.
Listen carefully! These pieces will be mounted on the side knobs at the left.
Put 1 round plate 1x1 upright on the upper backmost knob on the left side.
Put the plate 1x2 upright horizontally in front of the previous piece.
Put the other round plate 1x1 upright in front of the previous piece.
Find 1 dark stone grey bow tile 1x4x⅔.
Continue if you want to decorate this piece with the license plate sticker now. If not, skip the next 3 sentences.
Find 1 small rectangular sticker number 7. Ask a sighted person to help you find the correct sticker.
Put it horizontally centered on the bow tile.
The white sticker has a bold black frame. The license number is "M P 6 0 2 9 2 " and is printed on the sticker in bold black letters.
Mount this piece upright horizontally on the lower side knobs on the left side.
Find 1 bright blue flat tile 1x4.
Put it vertically on the leftmost column.
Find 2 transparent brown windscreens 2x4x2.
Put 1 vertically to the right of the previous piece, slope to the left.
Put the other one vertically on the rightmost edge, slope to the right.
Collect the following 2 pieces:
1 bright blue hood plate 4x4x⅔ with 2 angled corner and 2 knobs,
and 1 transparent red plate 1x2.
Put the hood plate on the table, knobs to the right.
Put the plate 1x2 vertically underneath the top knobs of the hood plate.
Mount this part on top of the windscreens, top knobs to the right.

Now, we assemble the 4 electric car wheels. Let's start with one.

Collect the following 2 pieces:
1 medium stone grey small rim with cross hole,
and 1 black small slick rubber tire.
Put the tire around the rim.
Find another 3 rims and another 3 tires.
Assemble the remaining 3 tires just like the first one.
Now, snap all 4 tires onto the pin connectors at the bottom of the car.
The electric car is finished! Well done! You can already take it for a test drive and see how far it can go. Once the car wash with electric vehicle charging station is finished, you can also charge it any time you want!

Next up, we will build the crook Minifigure.

Collect the following 2 pieces:
1 white and bright yellow upper part of the body,
and 1 mud grey pair of legs.
Put the upper body on top of the legs.
Collect the following 2 pieces:
1 dark stone grey short beanie cap,
and 1 bright yellow head.
Put the head on top.
Put the short beanie cap on the head.
Collect the following 2 pieces:
1 bright red Minifigure crowbar,
and 1 white flat tile 2x2. (This piece is printed.)
Put the crowbar in the crook's hand.
Snap the flat tile 2x2 into the other hand. It is printed with a pizza box in the colors of the Italian flag (which consists of a red, a white, and a green horizontal stripe) and with the word "PIZZA" in the middle! What on earth is the crook doing with the pizza? Maybe he is just hungry. Or do you think he might be hiding something in it?
The crook Minifigure is finished! Great job! The crook is wearing grey pants and a white button-down shirt with grey horizontal stripes on it. Looks like this is his prison uniform, because the prisoner number is printed on his right chest. He has a stubble, and a very grim look on his face.

Next, we will build the policeman Minifigure.

Collect the following 3 pieces:
1 earth blue pair of legs,
1 baby blue and bright yellow upper part of the body,
and 1 bright yellow head.
Assemble the Minifigure: put the upper body on top of the legs, and then put the head on top.
Find 1 earth blue racing helmet.
Put it on the head.
The policeman Minifigure is finished! Well done! The policeman has a friendly face and is wearing orange motorcycle goggles. He is wearing dark blue pants and a light blue shirt, as well as a grey utility belt. His badge is pinned onto his left chest, and a radio unit is dangling from his right shoulder.

Next, we will build the police bicycle.

Find 1 earth blue bicycle frame.
Put it horizontally on the table, handle to the left.

Now, we will assemble the 2 bicycle wheels. Let's start with one.

Collect the following 2 pieces:
1 silver metallic motorcycle rim with pins and spokes,
and 1 black motorcycle tire with high profile.
Put the tire around the rim.
Find another rim and another tire. Assemble the second wheel just like the first one.
Now, snap the wheel pins onto the forks of the frame.
The police bicycle is finished! Well done! Now, the policeman can go on his first patrol. Do you think he will catch the crook in the act?

Next, we will start building the car wash with EV charging station and road plates. First up is the EV charging station.

Collect the following 2 pieces:
1 medium stone grey plate 8x8,
and 1 dark stone grey flat tile 1x8.
Put the plate 8x8 on the table so that it forms neat rows and columns in front of you.
Put the flat tile 1x8 horizontally on the backmost row.
Collect the following 2 pieces:
1 dark stone grey flat tile 1x8,
and 1 dark stone grey flat tile 1x4.
Put the flat tile 1x8 horizontally in front of the previous piece.
Put the flat tile 1x4 vertically in front of the previous piece on the leftmost column.
Find 4 dark stone grey flat tiles 2x4.
Put 1 vertically to the right of the previous piece.
Put the other 3 vertically to the right. This means that the last one will have 1 column overhanging to the right.
Collect the following 2 pieces:
1 dark azure blue flat tile 2x4,
and 1 dark azure blue brick 2x4.
Put the flat tile 2x4 horizontally on the 2 frontmost rows, starting from the right edge.
Put the brick 2x4 horizontally to the left.
Collect the following 2 pieces:
1 bright yellow plate 2x2,
and 1 bright yellow plate 2x2 with 2 knobs.
Put the plate 2x2 into the front left corner.
Put the plate 2x2 with 2 knobs to the right of the previous piece, knobs to the right.
If done correctly, there are now two columns with 2 knobs each on the leftmost frontmost edge, one smooth column without knobs to their right, and another column with 2 knobs to the right of that.
Find 1 medium stone grey bottom angle plate 1x2 - 2x2 with 4 side knobs.
Put it vertically on the second column from the left, side knobs to the right.
Find 1 bright yellow one-stepped curve tile 2x2x⅔.
Put it on the previous piece and the leftmost column, curve to the left.

Next, we will build the EV charging display.

Collect the following 2 pieces:
1 bright yellow plate 2x3,
and 1 bright yellow one-stepped curve tile 2x2x⅔.
Put the plate 2x3 horizontally on the table.
Put the one-stepped curve tile on the leftmost column, overhanging to the left, curve to the left.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 square sticker number 8. Ask a sighted person to help you find the correct sticker.
Put it on top of the previous piece.
The sticker is yellow and has a white, blue, and yellow logo for electric vehicle fuel with a thin black frame in the middle. The logo symbol is shaped like a yin and yang with one blue and one yellow drop, and below that a blue and yellow writing says "Octane" with a capital "E" at the end that has a tiny electric plug on its lowest horizontal line.
Collect the following 2 pieces:
1 bright yellow one-stepped curve tile 2x2x⅔,
and 1 medium stone grey flat tile 1x2. (This piece is printed.)
Put the flat tile 1x2 vertically to the right of the previous piece.
This piece is printed with two gauges, three white buttons, one white and one red indicator light and a charging display.
Put the one-stepped curve tile to the right of the previous piece, curve to the right.
The EV charging display is finished! Flip it upright, make sure the sticker is at the top, and mount its 2 lowest rows on the four side knobs of the structure that are pointing to the right.
Find 1 black string 11m with 2 knobs. (This means that the piece is 11 knobs long.)
Mount the 2 knobs on the 2 remaining knobs on the structure. This is the charging cable for electric vehicles.
Find 1 bright yellow round tile 1x1.
Put it on the frontmost knob of the previous piece.
Find 1 dark stone grey plate 16x16x⅔ with 12 cutouts. (This piece is also known as a "road plate".)
First, put it on the table to the right of the structure. Locate the front vertical cutout on the left edge of the road plate.
Put the overhanging column on the structure into said cutout.
The EV charging station is now finished! Great job! Of course we need to build a road before the electric car can drive there for charging. Let's go!

Open bag number 2. This bag contains all bricks and pieces for completing the road plates. All of these pieces are dark stone grey, but some of them have lane markings printed on them. Ask a sighted person to sort the printed and non-printed pieces if you like.

Find 2 dark stone grey curve tiles 5x8x⅔ with protruding row 1x4.
Put 1 horizontally on the front horizontal cutout on the left. Use the protruding row that fits perfectly into the cutout.
Repeat symmetrically on the right.
Find 2 dark stone grey flat tiles 2x4 with print.
Find 4 dark stone grey flat tiles 2x4 without print.
Put the 2 flat tiles with print vertically into the two vertical cutouts in the middle of the plate.
(These pieces are printed with a bold white stripe in the middle. These stripes are the lane markings in the middle of the road.)
Put 2 flat tiles without print horizontally into the two horizontal cutouts in the middle of the plate.
Put the remaining 2 flat tiles without print horizontally into the two cutouts at the back, one row overhanging to the back.
Find 2 dark stone grey flat tiles 1x4.
Put them vertically into the two vertical cutouts on the right side of the plate.
Find 1 dark stone grey plate 16x16x⅔ with 12 cutouts.
Connect it to the 2 overhanging rows at the back by using the two front horizontal cutouts of the new plate.
Find 2 dark stone grey flat tiles 2x4 with print, and 4 dark stone grey flat tiles 2x4 without print.
Put the 2 flat tiles with print vertically into the 2 vertical cutouts in the middle of the new road plate.
Put 2 flat tiles without print horizontally into the 2 horizontal cutouts in the middle of the plate.
Put 2 flat tiles without print horizontally into the 2 cutouts at the back, one row overhanging to the back.
Put the remaining 2 flat tiles without print vertically into the 2 cutouts on the right, one row overhanging to the right.
Find 1 dark stone grey plate 16x16x⅔ with 12 cutouts.
Connect it to the 2 overhanging rows at the back by using its two front cutouts.
Collect the following 5 pieces:
2 dark stone grey flat tiles 2x4 with print, and 2 dark stone grey flat tiles 2x4 without print,
and 1 dark stone grey flat tile 1x4.
Put the 2 flat tiles 2x4 with print vertically into the 2 vertical cutouts in the middle of the new road plate.
Put the 2 flat tiles 2x4 without print horizontally into the two horizontal cutouts in the middle of the plate.
Put the flat tile 1x4 vertically into the backmost vertical cutout on the left side.
Find 2 dark stone grey curve tiles 5x8x⅔ with protruding row 1x4.
Put them horizontally into the 2 cutouts at the back.
Find 2 dark stone grey flat tiles 1x4.
Put them vertically into the 2 backmost vertical cutouts on the right side.
Find 1 dark stone grey plate 8x16x⅔ with 7 cutouts. (This tile is printed.)
Turn it vertically. Locate the 2 overhanging columns 1x4 on the right side of the structure.
Now, mount the left vertical cutouts of the new plate underneath said overhanging columns.
The plate 8x16 is printed with white horizontal stripes. They are the crosswalk of the town center!
Find 2 dark stone grey flat tiles 2x4.
Put them vertically into the 2 vertical cutouts on the rightmost edge, one column overhanging to the right.
Find 1 dark stone grey plate 8x16x⅔ with 7 cutouts. (This piece does not have a print.)
Turn it vertically, and mount the vertical cutouts on its left side underneath the overhanging columns on the rightmost edge of the structure.
Find 2 dark stone grey flat tiles 2x4. (These pieces are printed with lane markings again.)
Put them horizontally into the two horizontal cutouts in the middle of the two previous road plates.
Find 2 dark stone grey curve tiles 5x8x⅔ with protruding row 1x4.
Put them vertically into the vertical cutouts on the rightmost edge of the structure.
The roads of the LEGO City town center are finished! Great job! You can put the road junction and EV charging station aside for now, but keep it close, and keep the current orientation: the long road is running back to front on the left, and the crossing side road with crosswalk is extending towards the right. The EV charging station is at the front left. We will keep adding the different builds as we finish them.

Open bag number 3. You can choose to have the bricks sorted by color again. This bag contains the bricks and pieces for the lower level of the car wash.

Collect the following 3 pieces:
2 dark stone grey corner tiles 2x2,
and 1 medium stone grey plate 16x16.
Put the plate 16x16 on the table. Make sure the knobs form neat rows and columns in front of you.
Put the corner tiles into the leftmost and rightmost corner at the front. Put them so that the corner tiles and the corners of the plate align perfectly.
Find 2 dark stone grey plates 2x3.
Put 1 horizontally on the second row from the front and the second column from the left. This means you fit the corner of the plate neatly into the corner tile on the left.
Repeat symmetrically on the right.
Find 4 dark stone grey grille tiles 1x2.
Put them horizontally on the second row from the front, forming a line between the two previous pieces.
Collect the following 3 pieces:
2 dark stone grey flat tiles 2x4,
and 1 dark stone grey flat tile 1x4.
Put 1 flat tile 2x4 horizontally on the frontmost row on the left edge, one row overhanging to the front.
Put the flat tile 1x4 horizontally on the front row to the right of the previous piece.
Put the other flat tile 2x4 horizontally to the right of the previous piece, one row overhanging to the front.
Collect the following 12 pieces:
6 black flat tiles 2x4,
and 6 bright yellow flat tiles 2x4.
These will be arranged vertically in the middle of the base plate: two vertical black columns in the middle, and one vertical yellow column on each side of the black columns.
Put 1 yellow flat tile vertically on the fifth and sixth column from the left, directly behind the grill tile line.
Put 2 more yellow flat tiles vertically behind the previous piece.
Put 3 black flat tiles vertically to the right of the three previous pieces.
Put another 3 black flat tiles vertically to the right of the three previous pieces.
Put the remaining 3 yellow flat tiles vertically to the right of the three previous pieces.
Collect the following 4 pieces:
2 white plates 1x2 with 1 knob,
and 2 dark stone grey grille tiles 1x2.
Skip 2 columns from the leftmost edge, and put 1 grille tile horizontally on the third row of knobs from the front.
Repeat symmetrically on the right.
Put 1 plate 1x2 with 1 knob horizontally behind the previous piece.
Repeat symmetrically on the left.
Find 6 white flat tiles 2x3.
Put 1 horizontally behind the previous piece. The leftmost column of the structure remains empty.
Put another 2 horizontally behind the previous piece.
Repeat symmetrically on the right with the remaining 3 pieces.
Collect the following 4 pieces:
2 dark stone grey corner tiles 2x2,
and 2 white plates 2x2.
Put the corner tiles into the leftmost and rightmost corner at the back so that the corners align perfectly.
Fit the plates 2x2 into the cutouts of the corner tiles.
Find 5 dark stone grey grille tiles 1x2.
Put them horizontally on the second row from the back so that they form a line between the two previous pieces.
Next, let's make 2 small parts. They will later hold the car wash brushes.
Collect the following 2 pieces:
1 bright red cross axle 2m with 2 grooves (this piece is 2 knobs long),
and 1 dark stone grey t-shaped cross axle joint 2m. (This piece is 2 knobs long)
Put the cross axle joint on the table. The cross hole is pointing towards you, the block-like part is at the back, and the back hole is running top to bottom.
Insert the cross axle front-to-back into the cross hole.
Collect the following 2 pieces:
1 black brick 1x2 with cross hole,
and 1 bright red cross axle 2m with 2 grooves.
Push the brick 1x2 horizontally on the cross axle protruding to the front.
Insert the new cross axle top-to-bottom into the hole at the back.
Let's make another such part: find 1 dark stone grey t-shaped cross axle joint 2m, and 1 bright red cross axle 2m with 2 grooves.
Put the cross axle joint on the table. The cross hole is pointing towards you, the block-like part is at the back, and the back hole is running top to bottom.
Insert the cross axle front-to-back into the cross hole.
Find another black brick 1x2 with cross hole, and another bright red cross axle 2m with 2 grooves.
Push the brick 1x2 horizontally on the cross axle protruding to the front.
Insert the new cross axle top-to-bottom into the hole at the back.
The 2 small parts are finished! Great job, this was hard!
Let's mount the first one: skip 2 columns from the right, and put the brick 1x2 horizontally on the second row of knobs from the front. The rest of the part is overhanging to the back. One cross axle is pointing towards the top.
Repeat symmetrically on the left.
Find 4 white bricks 1x2.
Put 1 horizontally in front of the previous part.
Repeat symmetrically on the right.
Put 1 vertically to the right of the previous piece and the small part.
Repeat symmetrically on the left.
Find 2 white bricks 2x2.
Put 1 in the frontmost right corner on top of the previous pieces.
Repeat symmetrically on the left.
These two bricks are the bases of the front pillars of the car wash.
Collect the following 2 pieces:
1 dark stone grey grille tile 1x2,
and 1 white roof tile 1x2, 45°. (This piece is printed.)
Put the roof tile 1x2 vertically to the right of the previous piece.
This piece is printed with a cash register with keypad and card slot. Here, customers can pay for the car wash services.
Put the grille tile 1x2 vertically on the third row from the left, next to the brick 2x2 at the front.
Find 4 white bricks 1x2x5.
They will form two pillars at the back. First, locate the two plates 2x2 in the left and right corners at the back.
Put 2 horizontally on the plate 2x2 at the left back.
Put the other 2 horizontally on the plate 2x2 at the right back.

Next, we will build 2 car wash brushes.

Collect the following 2 pieces:
1 black angular technic beam 4m x 4m with 2 cross holes, 53°,
and 1 bright red cross axle 2m with 2 grooves.
Put the angular technic beam flat on the table, one arm of the beam pointing to you, the other arm pointing to the left back.
Insert the cross axle top to bottom into the cross hole at the front.
Find 1 black rubber band with 2 cross holes.
Put it on the cross axle, one cross hole overhanging to the front.
Find 1 dark stone grey cross axle 5.5m with stop 1m. (This piece is 5.5 knobs long, the stop is located laterally after 1 knob's length.)
Insert the short part of the cross axle top to bottom into the cross hole at the back.
Find 2 bright blue brushes.
Put them on the cross axle at the back.
The first car wash brush is finished! Good job! To mount it, put the cross hole of the rubber band on the cross axle at the front right of the structure. Let the brush extend to the back left.
Now, let's make the second brush.
Collect the following 2 pieces:
1 black angular technic beam 4m x 4m with 2 cross holes, 53°,
and 1 bright red cross axle 2m with 2 grooves.
Put the angular technic beam flat on the table, one arm pointing to you, the other arm pointing to the right back.
Insert the cross axle top-to-bottom into the cross hole at the front.
Find 1 black rubber band with 2 cross holes.
Put it on the cross axle, one cross hole overhanging to the front.
Find 1 dark stone grey cross axle 5.5m with stop 1m.
Insert the short part of the cross axle into the cross hole at the back.
Find 2 bright blue brushes.
Put them on the cross axle at the back.
To mount this brush, put its front cross hole on the cross axle at the left front of the structure. Let the brush extend to the back right.
Find 2 white bricks 2x2.
Put them on the 2 pillar bases at the front, which are the two bricks 2x2 in the frontmost left and right corners.
Find 2 white bricks 1x2.
Put them horizontally on the back rows of the two previous pieces.
Now, let's make a small part.
Collect the following 3 pieces:
1 white brick 1x2 with 2 side knobs,
1 transparent green round tile 1x1,
and 1 transparent red round tile 1x1.
Put the brick 1x2 horizontally on the table, side knobs to the front.
Put the green round tile 1x1 upright on the left side knob.
Put the red round tile 1x1 upright on the right side knob.
Mount this part horizontally on the front row of the front pillar on the right, side knobs to the front.
Find 1 white brick 1x2 with 2 side knobs.
Put it horizontally on the front row of the front pillar on the left, side knobs to the front.
Find 2 white bricks 2x2.
Put them on top of the left and right front pillar.
Find 1 dark green flat tile 2x3.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 14. Ask a sighted person to help you find the correct sticker.
Put it on top.
The sticker is printed with the instruction sign of the car wash. It is mostly white with a green banner on top. There is white writing in the banner that says: "3 easy steps". Below, steps 1 through 3 are indicated with red digits. Green arrows next to the digits point to black symbols of what each step does: step 1 is soap, step 2 is wash, and step 3 is shine.
Mount this part upright on the side knobs at the front pillar on the left.

Open bag number 4. You can choose to have the bricks sorted by color again. This bag contains the remaining bricks and pieces of the car wash.

Find 4 dark green bricks 2x2.
Put them on top of the 4 pillars, 1 brick each.
Find 4 dark green bricks 2x2.
Again, put them on top of the 4 pillars.
Find 4 dark green bricks 2x2.
Put them on top of the 4 pillars. By now we have added 3 green bricks 2x2 to every pillar.
Find 4 dark green bricks 2x2.
Put them on top of the 4 pillars. This is the last round.
Find 4 black bricks 1x2 with cross hole.
Put 1 vertically on the inner column of the back pillar at the left.
Repeat symmetrically at the front.
Put another 1 vertically on the inner column of the back pillar at the right.
Repeat symmetrically at the front.
Find 2 black technic bricks 1x14.
Put 1 vertically to the right of the two previous pieces. This means it rests on the outer columns of the two right pillars.
Repeat symmetrically on the left.
Find 2 bright red plates 1x2.
Put 1 horizontally on the back row of the back pillar on the left.
Repeat symmetrically on the right.

Now, we will build 2 car wash glass walls.

Collect the following 2 pieces:
1 white plate 1x12,
and 1 transparent light blue wall element 1x6x5 with 6 top knobs and sides.
Put the wall element 1x6x5 horizontally on the table, hollow to the back.
Put the plate 1x12 horizontally on top, starting from the left edge, overhanging to the right.
Find 1 transparent light blue wall element 1x6x5 with 6 top knobs and sides.
Put it horizontally underneath the overhanging part of the previous piece, hollow to the back.
Find 2 transparent light blue wall elements 1x6x5 with 6 top knobs and sides.
Put them horizontally next to each other on top of the previous pieces, hollows to the back.
Mount this glass wall vertically on the rightmost column, hollow to the left. It should fit perfectly between the flat tile elements.
Next up is the second glass wall.
Collect the following 2 pieces:
1 transparent light blue wall element 1x6x5 with 6 top knobs and sides,
and 1 white plate 1x12.
Put the wall element 1x6x5 horizontally on the table, hollow to the back.
Put the plate 1x12 horizontally on top, starting from the left edge, overhanging to the right.
Find 1 transparent light blue wall element 1x6x5 with 6 top knobs and sides.
Put it horizontally underneath the overhanging part of the previous piece, hollow to the back.
Find 2 transparent light blue wall elements 1x6x5 with 6 top knobs and sides.
Put them horizontally next to each other on top of the previous pieces, hollows to the back.
Mount the second glass wall vertically on the leftmost column, hollow to the right.
Collect the following 4 pieces:
2 bright red plates 2x2,
and 2 bright red plates 1x1.
Put 1 plate 1x1 on the front left knob of the front pillar on the left.
Repeat symmetrically on the right.
Put 1 plate 2x2 behind the previous piece so that it connects the glass wall with the vertical connecting brick.
Repeat symmetrically on the left.
Find 5 bright red plates 2x16.
Put 1 horizontally behind the two previous pieces.
Put the other 4 horizontally behind the previous piece to form a flat roof.

Next up, we will build the top water jet unit.

Collect the following 2 pieces:
1 black brick 1x2 with cross hole,
and 1 black cross axle 12m. (This piece is 12 knobs long.)
Put the brick 1x2 vertically on the table.
Insert the cross axle into the cross hole from the left. Only push it in until it is flush on the right side. This means the cross axle only sticks out to the left.
Find 1 bright yellow cross bushing 1x½.
Put it on the cross axle from the left and push it further until it touches the brick 1x2.

Next up, we will build 5 jet nozzles.

Collect the following 2 pieces:
1 black t-shaped technic beam 1m with plate 1x2,
and 1 white plate 1x2 with 1 knob.
Put the plate with 1 knob on the 2 knobs of the technic beam.
Find 1 transparent light blue flame with 5 fire tongues. (Here, the flame is actually a jet of water.)
Insert the shaft of the flame into the knob of the previous piece.
The first jet nozzle is finished! Now, put the round hole onto the cross axle and slide it all the way to the right. The water jet points towards the bottom.
Find 1 white technic bushing 1m. (This piece is 1 knob long and has the form of a round sleeve.)
Put it on the cross axle, slide it all the way to the right.
Let's make the second jet nozzle.
Collect the following 2 pieces:
1 white plate 1x2 with 1 knob,
and 1 black t-shaped technic beam 1m with plate 1x2.
Put the plate with 1 knob on the 2 knobs of the technic beam.
Find 1 transparent light blue flame with 5 fire tongues.
Insert the shaft of the flame into the knob of the previous piece.
Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.
Find 1 white technic bushing 1m.
Put it on the cross axle, slide it to the right.
Let's make the third jet nozzle.
Collect the following 2 pieces:
1 black t-shaped technic beam 1m with plate 1x2,
and 1 white plate 1x2 with 1 knob.
Put the plate with 1 knob on the 2 knobs of the technic beam.
Find 1 transparent light blue flame with 5 fire tongues.
Insert the shaft of the flame into the knob of the previous piece.
Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.
Find 1 white technic bushing 1m.
Put it on the cross axle, slide it to the right.
Let's make the fourth jet nozzle.
Collect the following 2 pieces:
1 black t-shaped technic beam 1m with plate 1x2,
and 1 white plate 1x2 with 1 knob.
Put the plate with 1 knob on the 2 knobs of the technic beam.
Find 1 transparent light blue flame with 5 fire tongues.
Insert the shaft of the flame into the knob of the previous piece.
Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.
Find 1 white technic bushing 1m.
Put it on the cross axle, slide it to the right.
Let's make the fifth and last jet nozzle.
Collect the following 2 pieces:
1 white plate 1x2 with 1 knob,
and 1 black t-shaped technic beam 1m with plate 1x2.
Put the plate with 1 knob on the 2 knobs of the technic beam.
Find 1 transparent light blue flame with 5 fire tongues.
Insert the shaft of the flame into the knob of the previous piece.
Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.
Find 1 bright yellow cross bushing 1x½.
Put it on the cross axle and push it to the right.
Find 1 black brick 1x2 with cross hole.
Put it vertically on the cross axle from the left.
Make sure the cross axle is flush on both sides and does not stick out on one side.
The top water jet unit is finished! Well done! Mount it horizontally on top of the car wash: put the 2 bricks 1x2 vertically on the inner columns of the 2 front pillars. Let the jets of water point to the bottom.
Find 1 bright red plate 2x12.
Put it horizontally on top of the top water jet unit.

Now, we build 2 floodlights.

Collect the following 2 pieces:
1 transparent yellow plate 1x2,
and 1 white plate 1x2 with 2 vertical clasps on long side.
Put the plate 1x2 horizontally on the table.
Put the plate with 2 clasps horizontally on top, clasps to the back.
Find 1 medium stone grey plate 1x2 with handle on long side.
Snap the handle into the 2 clasps at the back, piece overhanging to the back.
The first floodlight is finished! Well done!
Mount the plate that is pointing to the back on the front row of the highest part of roof on the left edge. You can adjust the beam of the floodlight by folding it up and down.
Find another transparent yellow plate 1x2, and another white plate 1x2 with 2 vertical clasps on long side.
Put the plate 1x2 horizontally on the table.
Put the plate with clasps horizontally on top, clasps to the back.
Find another medium stone grey plate 1x2 with handle on long side.
Snap the handle into the clasps at the back, piece overhanging to the back.
The second floodlight is finished! Mount it on the front row on the right edge of the highest part.

Next, we build the commercial sign of the car wash.

Find 1 white plate 4x4 with 4 knobs.
Put it on the table, knobs to the front.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 2.
Put it on the flat part behind the knobs.
The sticker is white and has the car wash logo on it: a yin and yang symbol composed of a green and a red drop. Below the logo, the word "Octan" is written in red and green letters.
Find 2 medium stone grey bottom angle plates 1x2 - 2x2 with 4 side knobs.
Mount the four side knobs of the first angle plate underneath the previous piece at the front on the right edge, plate 1x2 at the front and pointing to the bottom.
Mount the four side knobs of the second angle plate underneath to the left of the previous piece.
Flip the commercial sign upright and mount the two plates 1x2 horizontally centered on the frontmost row of the roof.
The car wash is finished! Very well done, this was a great effort! Turn the car wash so that the 2 protruding rows 1x4 at the bottom are pointing to the right. Then connect them to the two vertical cutouts on the left edge behind the EV charging station. Excellent!
The car wash with EV charging station and road plates is finished! Well done! This is already a huge part of the LEGO City town center. Ride your car on the roads of LEGO City, but watch out for pedestrians on the crosswalk! Charge your electric vehicle or have it washed in the cool car wash facility.

Open bag number 5. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Shirley Keeper Minifigure and the first half of the crane truck.


Next, we will build the Shirley Keeper Minifigure.

Collect the following 3 pieces:
1 bright blue and dark stone grey upper part of the body,
1 bright blue pair of legs,
and 1 bright yellow head.
Assemble the Minifigure: put the upper body on top of the legs, and put the head on top.
Find 1 bright orange hairpiece with a bob hairstyle.
Put it on the head.
Let's make Shirley's remote control for the crane truck.
Collect the following 2 pieces:
1 bright yellow plate 1x2 with handle on long side,
and 1 black round plate 1x1 with top shaft.
Put the plate 1x2 horizontally on the table, handle to the back.
Put the round plate 1x1 on the right knob.
Find 1 medium stone grey flat tile 1x1. (This piece is printed.)
Put it on the left knob.
The tile is printed with a gauge.
Snap the handle into one of Shirley Keeper's hands.
The Shirley Keeper Minifigure is finished! Great job! She is a sanitation worker in LEGO City, and therefore she is wearing blue worker overalls with a neon green reflective vest on top. She has ginger hair cut into a bob hairstyle and is wearing round red glasses as well as red lipstick. She has a small beauty mark on her left cheek. She looks a bit stressed, though, because there is a lot to do to keep LEGO City clean. Let's help her and build the crane truck!

Next up, we will build the crane truck.

Collect the following 2 pieces:
1 medium stone grey plate 2x16,
and 1 black plate 1x6.
Put the plate 2x16 horizontally on the table.
Put the plate 1x6 vertically centered on the rightmost column.
Collect the following 3 pieces:
2 medium stone grey one-stepped bearing elements 2x2 with side pin connector,
and 1 transparent red plate 1x2.
Put the plate 1x2 vertically to the left of the previous piece.
Put 1 one-stepped bearing element 2x2 to the left on the back row, one row and pin connector overhanging to the back.
Repeat symmetrically at the front.
Collect the following 3 pieces:
2 transparent red plates 1x2,
and 1 pale ocher yellow flat tile 2x4.
Put 1 plate 1x2 vertically to the left of the two previous pieces.
Put the flat tile 2x4 horizontally to the left.
Put the other plate 1x2 vertically to the left.
Collect the following 3 pieces:
2 medium stone grey one-stepped bearing elements 2x2 with side pin connector,
and 1 transparent red plate 1x2.
Put 1 one-stepped bearing element 2x2 to the left of the previous piece on the back row, one row and pin connector overhanging to the back.
Repeat symmetrically at the front.
Put the plate 1x2 vertically to the left.
Find 2 medium stone grey one-stepped bearing elements 2x2 with side pin connector.
Put 1 to the left of the previous piece on the back row, one row and pin connector overhanging to the back.
Repeat symmetrically at the front.
Find 1 black plate 2x2.
Put it to the left of the 2 previous pieces, one column overhanging to the left.
Find 2 medium stone grey plates 2x16.
Put 1 horizontally on the 2 frontmost rows, starting from the right edge. Make sure that there is still 1 knob sticking out towards the front on the rightmost column.
Put the other one horizontally behind the previous piece. Make sure that there is still 1 knob sticking out towards the back on the rightmost column. Two knobs are sticking out towards the left in the middle of the leftmost edge.
Collect the following 3 pieces:
2 transparent bright orange plates 1x1,
and 1 bright blue brick 1x4 with 4 side knobs.
Put 1 plate 1x1 on the backmost knob of the rightmost column.
Put the brick 1x4 vertically in front of the previous piece, side knobs to the right.
Put the other plate 1x1 in front of the previous piece.
Find 2 black inverted roof tiles 1x2, 45°.
Put 1 horizontally on top of the previous piece, slope to the left.
Repeat symmetrically at the back.
Collect the following 3 pieces:
2 black bricks 2x4 with mudguard,
and 1 bright red brick 2x3.
Put 1 brick with mudguard horizontally to the left of the previous piece on the back row, mudguard to the back.
Put the brick 2x3 horizontally in front of the previous piece. Make sure the two bricks are flush on the left side.
Put the other brick with mudguard horizontally in front of the previous piece on the front row, mudguard to the front.
Find 1 black inverted double roof tile 1x6x1, 45°.
Put it vertically to the left of the 3 previous pieces, slopes to the front and back.
Find 2 bright orange plates 2x4.
Put 1 vertically to the left of the previous piece.
Put the other one vertically to the left.
Find 6 black smooth roof tiles 1x2x⅔.
Put 3 horizontally to the left of the previous piece next to each other on the backmost row, slopes to the back.
Repeat symmetrically on the frontmost row.
Find 2 black smooth roof tiles 1x1x⅔.
Put 1 to the left of the previous pieces, slope to the front.
Repeat symmetrically at the back.
Find 1 black plate 1x6.
Put it vertically centered on the leftmost column.
Collect the following 2 pieces:
1 black plate 3x2 with half circle and hole,
and 1 bright red plate 3x2 with half circle and hole.
Stack them on top of each other, black plate at the bottom and red plate at the top. Make sure the half circles and holes align.
Mount them horizontally on the left edge on the middle two rows, half circle and hole overhanging to the left.

Next up, we build the tail lamps.

Collect the following 2 pieces:
1 black bottom angle plate 1x2 - 1x2 with 2 side knobs,
and 1 transparent red plate 1x2.
Put the angle plate horizontally on the table, side knobs to the front.
Put the plate 1x2 horizontally on top.
Find 2 transparent red round tiles 1x1.
Put them upright on the side knobs pointing to the front.
The first set of tail lamps is finished, well done! Mount it vertically on the leftmost column at the back, side knobs to the left.
Find another black bottom angle plate 1x2 - 1x2 with 2 side knobs, and another transparent red plate 1x2.
Put the angle plate horizontally on the table, side knobs to the front.
Put the plate 1x2 horizontally on top.
Find another 2 transparent red round tiles 1x1.
Put them upright on the side knobs pointing to the front.
Mount the second set of tail lamps vertically on the leftmost column at the front, side knobs to the left.
Find 4 dark stone grey top angle plates 1x2 - 2x2 with 4 side knobs.
Put 2 horizontally on the four knobs of the low part of the back row, side knobs to the back.
Repeat symmetrically at the front.
Now we will make a small part.
Collect the following 3 pieces:
1 bright orange plate 2x4,
and 2 black grille tiles 1x2.
Put the plate 2x4 horizontally on the table.
Put the grille tiles horizontally on the back row.
Find 1 bright orange flat tile 1x4.
Put it horizontally on the front row.
Flip this part upright, and mount it on the 8 side knobs pointing to the front, grille tiles forming the upper row.
Let's repeat this part for the back side.
Collect the following 2 pieces:
1 bright orange plate 2x4,
and 1 bright orange flat tile 1x4.
Put the plate 2x4 horizontally on the table.
Put the flat tile 1x4 horizontally on the back row.
Find 2 black grille tiles 1x2.
Put the grille tiles horizontally on the front row.
Flip the part upright, and mount it on the 8 side knobs pointing to the back. Make sure the grille tiles are forming the upper row of the part.
Find 1 black plate 6x12.
Put it horizontally centered on top of the structure, starting from the left edge.

Open bag number 6. You can choose to have the bricks sorted by color again. This bag contains the remaining bricks and pieces for the crane truck.

Find 1 white plate 4x6.
Put it vertically on top of the structure, starting from the right edge.
Collect the following 2 pieces:
1 white plate 1x6,
and 1 white plate 2x6.
Put the plate 2x6 vertically to the left of the previous piece.
Put the plate 1x6 vertically to the left of the previous piece.
Find 4 white flat tiles 1x6.
Put 1 vertically to the left of the previous piece.
Put 1 horizontally to the left of the previous piece on the backmost row.
Repeat symmetrically on the front row.
Put the last one vertically to the left of the two previous pieces.
Collect the following 5 pieces:
4 medium stone grey plates 2x2 with 1 knob,
and 1 medium stone grey flat tile 2x4.
Put 1 plate 2x2 with 1 knob to the right of the previous piece in the back corner.
Put another one in front of the previous piece.
Put the flat tile 2x4 vertically to the right of the two previous pieces.
Put the 2 remaining plates 2x2 with 1 knob to the right of the previous piece.
Find 3 bright orange smooth roof tiles 1x2x⅔.
Put them vertically on the second column from the left, slopes to the left.
Collect the following 4 pieces:
2 transparent bright orange flat tiles 1x1,
and 2 black grille tiles 1x2.
Put 1 flat tile 1x1 on the backmost knob of the leftmost column.
Put 1 grille tile vertically in front of the previous piece.
Put the other grille tile vertically in front of the previous piece.
Put the other flat tile 1x1 in front of the previous piece.
Collect the following 3 pieces:
1 bright orange plate 1x6,
and 2 bright orange plates 1x4.
Put 1 plate 1x4 horizontally on the backmost row, starting from the right edge.
Repeat symmetrically at the front.
Put the plate 1x6 vertically to the left of the 2 previous pieces.
Collect the following 2 pieces:
1 black and bright blue small steering wheel with plate 1x2,
and 1 bright blue plate 1x2 with angled top handle.
Put the small steering wheel 1x2 vertically centered on the rightmost column, steering wheel to the left.
Put the plate 1x2 with angled top handle vertically centered on the fourth column from the right, angle to the right.
Collect the following 4 pieces:
2 bright orange bricks 1x2,
and 2 bright orange bricks 1x3.
Put 1 brick 1x3 horizontally on the backmost row, starting from the right edge.
Repeat symmetrically on the front row.
Put 1 brick 1x2 horizontally to the left.
Repeat symmetrically on the back row.
Collect the following 2 pieces:
1 dark stone grey handrail element with bottom plate 1x6,
and 1 medium stone grey wall element 1x4x3 with top knobs.
Put the wall element vertically centered between the two previous pieces on the left edge, panel to the left. This means it is mounted on the fifth column from the right.
Skip 1 column to the left, and mount the handrail element vertically, handrail to the right.

Now, we build the front grille of the crane truck.

Collect the following 2 pieces:
1 black relief plate 2x6x⅔ with 4 raised top knobs and 4 side knobs,
and 1 medium stone grey plate 2x3.
Put the relief plate 2x6 vertically on the table, side knobs to the right.
Put the plate 2x3 horizontally on the left column on the second and third knob from the back, two columns overhanging to the left.
Find 1 medium stone grey plate 2x3.
Put it horizontally in front of the previous piece, two columns overhanging to the left.
Find 1 black plate 2x6.
Put it vertically centered underneath the two previous pieces.
Find 2 bright orange smooth roof tiles 1x2x⅔.
Put 1 horizontally on the backmost row, starting from the right edge, slope to the back.
Repeat symmetrically at the front.
Find 4 transparent smooth roof tiles 1x1x⅔.
Put 2 to the left of the previous piece, slopes to the front.
Repeat symmetrically at the back.
Find 1 bright orange flat tile 1x4.
Put it vertically on the rightmost column.
Find 1 black lamella curve tile 4x1 with 3 lamellas.
Put it horizontally on the left edge, highest lamella to the left, lowest lamella overlapping the flat tile on the right.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 13. Ask a sighted person to help you find the correct sticker.
Put it vertically centered across the highest lamella on the left edge.
The sticker is printed with diagonal red and white stripes in the left and right corners, and in the middle it is printed with the white license plate with a bold black frame. The license number is: "J M 6 0 2 9 2", it is printed in black letters.
The front grille of the crane truck is finished! Well done! First, turn the crane truck left to right. This means that now, the tail lamps are pointing to the right.
To mount the front grille, flip it upright, the highest lamella and sticker at the bottom. Then mount it on the side knobs pointing to the left. Make sure that the top edge is flush with the rest of the structure.
Find 1 bright orange brick 1x2x2.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 1. Ask a sighted person to help you find the correct sticker.
Put it upright on one of the large side surfaces.
The sticker is bright orange and has a green recycling symbol printed in the middle. The symbol consists of three green bent arrows with white outlines that form a triangle.
Mount this piece horizontally on the backmost row on the fourth and fifth knob from the left, sticker to the back.
Find another bright orange brick 1x2x2.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 1. Ask a sighted person to help you find the correct sticker.
Put it upright on one of the large side surfaces. The sticker has the same design as the previous one.
Mount this piece horizontally on the frontmost row on the fourth and fifth knob from the left, sticker to the front.
Find 1 transparent windscreen 2x6x2.
Put it vertically on the leftmost column, slope to the left.
Collect the following 4 pieces:
1 black flat tile 1x2,
1 transparent red plate 1x2,
and 2 black corner plates 2x2.
Put the flat tile 1x2 vertically centered on top of the windscreen.
Put 1 corner plate into the back right corner of the highest part of the structure.
Put the plate 1x2 vertically in front of the previous piece.
Put the other corner plate into the front right corner of the highest part.

Next up, we will build the exterior rearview mirrors.

Collect the following 2 pieces:
1 bright orange smooth roof tile 1x2x⅔,
and 1 black plate 1x2 with vertical clasp on short side.
Put the plate with clasp vertically on the table, clasp to the front.
Put the roof tile 1x2x⅔ vertically on top, slope to the left.
Find 1 black plate 1x2 with shaft on short side.
Snap the shaft into the clasp at the front.
The first exterior rearview mirror is finished! Put it vertically on the 2 backmost knobs of the windscreen, the part with the roof tile overhanging to the back. You can fold down the exterior rearview mirror.
Next, let's make the second rearview mirror.
Collect the following 2 pieces:
1 black plate 1x2 with vertical clasp on short side,
and 1 bright orange smooth roof tile 1x2x⅔.
Put the plate 1x2 vertically on the table, clasp to the back.
Put the roof tile 1x2x⅔ vertically on top, slope to the left.
Find 1 black plate 1x2 with shaft on short side.
Snap the shaft into the clasp at the back.
Mount the second rearview mirror vertically on the 2 frontmost knobs of the windscreen, the part with the roof tile overhanging to the front.
Fold down the other exterior rearview mirror to finish the build.
Next, let's make the top safety lights.
Collect the following 2 pieces:
1 white plate 1x6,
and 1 bright orange plate 1x6.
Put the bright orange plate 1x6 vertically on the table.
Put the white plate 1x6 vertically on top.
Collect the following 3 pieces:
1 white plate 1x4 with 2 knobs,
and 2 transparent bright orange smooth roof tiles 1x1x⅔.
Put 1 roof tile 1x1 on the backmost knob, slope to the back.
Put the plate 1x4 vertically in front of the previous piece.
Put the other roof tile 1x1 on the frontmost knob, slope to the front.
Find 2 transparent bright orange flat tiles 1x1.
Put them on the two remaining knobs.
Mount this part vertically on the right edge of the highest part of the structure.
Find 1 bright orange hood plate 4x6x⅔ with 2 angled corners and 4 knobs.
Put it vertically to the left of the previous part, knobs to the right.

Next up, we will build the crane arm.

Collect the following 2 pieces:
1 pale ocher yellow connector peg 2m with cross axle pin (this piece is 2 knobs long),
and 1 black cross axle bushing 1m with hinge stub.
Insert the cross axle pin into the cross hole of the bushing.
Find 1 bright yellow brick 1x4 with hinge stub and hinge fork.
Snap the hinge fork onto the hinge stub of the previous piece.
Find 1 bright yellow brick 1x4 with hinge stub and hinge fork.
Snap its hinge fork on the hinge stub of the previous piece.
Find 1 bright yellow brick 1x2 with hinge stub and hinge fork.
Snap its hinge fork on the hinge stub of the previous piece.
Continue if you want to decorate this part with stickers now. If not, skip the next 11 sentences.
Collect the following 3 pieces:
2 rectangular stickers number 5,
and 1 small rectangular sticker number 6.
These stickers are all printed with diagonal black and yellow stripes.
Put the 2 longer stickers on the front sides of the bricks 1x4.
Put the smaller sticker on the front side of the brick 1x2.
Collect the following 3 pieces:
2 rectangular stickers number 5,
and 1 small rectangular sticker number 6.
Put the 2 longer stickers on the back sides of the bricks 1x4.
Put the smaller sticker on the back side of the brick 1x2.
Find 1 black ball coupling with hinge fork.
Snap its hinge fork on the hinge stub of the brick 1x2. Make sure the knob of the ball coupling is at the top.
Find 1 dark stone grey twin knob 1x1 with hook and ball.
Snap the ball into the ball coupling.
The crane arm is finished! Great job! Now, insert the connector at the end of the crane arm into the top-to-bottom hole on the right side of the structure. Let the crane arm extend towards the driver's cab. It rests between the top safety lights.

Next, we will assemble the 6 crane truck wheels. Let's start with one.

Collect the following 2 pieces:
1 medium stone grey wide rim with hole,
and 1 black wide rubber tire with high profile.
Put the tire around the rim.
Now, find another 5 tires and another 5 rims.
Assemble them just like the first wheel.
Snap the wheels onto the pin connectors at the bottom of the crane truck.
The crane truck is finished! Very good work! This truck is perfect for transporting the recycling containers and other large objects. Shirley Keeper is ready to go!

Open bag number 7. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the townswoman Minifigure with baby, the blind townsman Minifigure with guide dog, the recycling container station, and the small park with kids' ride.


Next, we will build the townswoman Minifigure with baby.

Collect the following 2 pieces:
1 sand blue pair of legs,
and 1 baby blue and bright yellow upper part of the body.
Put the upper body on top of the legs.
Find 1 mud grey baby carrier with neck bracket.
Put the neck bracket around the neck. Make sure the carrier is on the front side of the Minifigure.
Collect the following 2 pieces:
1 reddish brown hairpiece with medium-length wavy hair,
and 1 bright yellow head.
Put the head on top, and then put the hair on top.

Next, we will build the baby Minifigure.

Collect the following 2 pieces:
1 white and bright yellow baby Minifigure body,
and 1 bright yellow baby Minifigure head.
Put the head on the body.
You can seat the baby in the carrier now.
The townswoman Minifigure with baby is finished! Great job! Both baby and townswoman look cheerful. The townswoman is wearing medium blue pants, a lilac shirt with a star print on her chest, and a light blue zipper jacket on top. The baby is wearing a white onesie.

Now, we will build the blind townsman Minifigure with guide dog.

Collect the following 2 pieces:
1 bright red and bright yellow upper part of the body,
and 1 reddish brown pair of legs.
Put the upper body on top of the legs.
Collect the following 2 pieces:
1 dark brown hairpiece with short wavy hair and sideburns,
and 1 bright yellow head.
Put the head on top, and then put the hair on top.

Now, we will assemble the guide dog with leash.

Collect the following 2 pieces:
1 reddish brown dog,
and 1 bright yellowish green dog leash.
Put the leash on the knob of the dog: the handle faces the same way as the dog's tail.
Snap the handle of the leash into the hand of the blind townsman.
The blind townsman Minifigure with guide dog is finished! Good job! The townsman is wearing a red and black checkered plaid shirt and brown trousers. He has a cool smile on his face and is wearing black sunglasses. With his guide dog, the blind man can easily stroll through town and run his errands.

Next, we will build the recycling container station.

Collect the following 3 pieces:
1 white flat tile 1x6,
1 medium stone grey flat tile 1x6,
and 1 mud grey plate 8x16.
Put the plate 8x16 horizontally on the table.
Put the white flat tile 1x6 vertically on the rightmost column, starting from the back.
Put the grey flat tile 1x6 vertically to the left of the previous piece.
Collect the following 4 pieces:
2 medium stone grey grille tiles 1x2,
and 2 medium stone grey plates 2x2 with 1 knob.
Put 1 grille tile 1x2 horizontally to the left of the previous piece on the backmost row.
Put 1 plate 2x2 in front of the previous piece.
Put the other plate 2x2 in front of the previous piece.
Put the other grille tile 1x2 horizontally in front of the previous piece.
Collect the following 3 pieces:
2 medium stone grey flat tiles 1x6,
and 1 white flat tile 1x6.
Put 1 grey flat tile 1x6 vertically to the left of the previous pieces.
Put the white flat tile 1x6 vertically to the left.
Put the other grey flat tile 1x6 vertically to the left.
Collect the following 4 pieces:
2 medium stone grey plates 2x2 with 1 knob,
and 2 medium stone grey grille tiles 1x2.
Put 1 grille tile 1x2 horizontally to the left of the previous piece on the backmost row.
Put 1 plate 2x2 in front of the previous piece.
Put the other plate 2x2 in front of the previous piece.
Put 1 grille tile 1x2 horizontally in front of the previous piece.
Collect the following 2 pieces:
1 medium stone grey flat tile 1x6,
and 1 white flat tile 1x6.
Put the grey flat tile 1x6 vertically to the left of the previous pieces.
Put the white flat tile 1x6 vertically to the left.

Next up, we will build the glass recycling container.

Collect the following 2 pieces:
1 white plate 4x6,
and 1 dark green brick 1x2.
Put the plate 4x6 horizontally on the table.
Put the brick 1x2 vertically on the rightmost column, starting from the back.
Find 1 dark green brick 1x4.
Put it horizontally to the left of the previous piece on the back row.
Collect the following 2 pieces:
1 dark green smooth roof tile 1x1x⅔,
and 1 dark stone grey flat tile 2x4.
Put the flat tile 2x4 horizontally in front of the previous piece.
Put the roof tile 1x1 on the rightmost column on the second knob from the front, slope to the left.
Find 1 dark green brick 1x6.
Put it horizontally on the front row.
Find 1 white left door 1x3x2.
Put it vertically on the leftmost column, door knob to the left and the top knob at the back, door swinging out towards the left.
Collect the following 2 pieces:
1 dark green brick 1x4,
and 1 dark green brick 1x1.
Put the brick 1x1 to the right of the previous piece on the backmost row.
Put the brick 1x4 horizontally to the right.
Find 1 dark green brick 1x3 with inside arch.
Put it vertically on the rightmost column, starting from the front.
Collect the following 2 pieces:
1 dark green brick 1x1,
and 1 dark green brick 1x4.
Put the brick 1x4 horizontally to the left of the previous piece on the front row.
Put the brick 1x1 to the left.
Collect the following 2 pieces:
1 white curve plate 4x6x⅔ with 4 knobs,
and 1 black round plate 2x2 with lifting ring.
Put the plate 4x6x⅔ horizontally on the table.
Put the round plate with lifting ring on top.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 4. Ask a sighted person to help you find the correct sticker.
Put it vertically on the right edge of the plate.
The sticker is white. It has a green recycling symbol in the middle which consists of three bent arrows forming a triangle. In the middle of this triangle is a green symbol for a bottle.
Put this part horizontally on top of the recycling container, sticker to the right. This is the lid of the recycling container.
The glass recycling container is finished! Well done! Mount it vertically in the right back corner of the structure, door to the back, while leaving the rightmost column without knobs empty. The small hole on the front surface is for inserting bottles.

Now, we will build the paper recycling container.

Collect the following 2 pieces:
1 white plate 4x6,
and 1 bright blue brick 1x4.
Put the plate 4x6 horizontally on the table.
Put the brick 1x4 vertically on the rightmost column.
Find 1 bright blue brick 1x4.
Put it horizontally to the left of the previous piece on the backmost row.
Find 1 dark stone grey flat tile 2x4.
Put it horizontally in front of the previous piece.
Collect the following 2 pieces:
1 bright blue brick 1x1,
and 1 bright blue brick 1x4.
Put the brick 1x4 horizontally in front of the previous piece.
Put the brick 1x1 to the left.
Find 1 white left door 1x3x2.
Put it vertically on the rightmost column at the back, door handle to the left.
Collect the following 2 pieces:
1 bright blue brick 1x1,
and 1 bright blue brick 1x4.
Put the brick 1x1 to the right of the previous piece on the back row.
Put the brick 1x4 horizontally to the right.
Find 1 bright blue smooth roof tile 1x2x⅔.
Put it vertically on the rightmost column in front of the previous piece, slope to the left.
Find 1 bright blue brick 1x6.
Put it horizontally on the frontmost row.
Collect the following 2 pieces:
1 white curve plate 4x6x⅔ with 4 knobs,
and 1 black round plate 2x2 with lifting ring.
Put the plate 4x6x⅔ horizontally on the table.
Put the round plate with lifting ring on top.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 3. Ask a sighted person to help you find the correct sticker.
Put it vertically on the right edge of the plate.
The sticker is white and again has the recycling symbol on it, but this time the symbol is bright blue. A symbol for a piece of paper with dog-ear is printed in the middle of the recycling triangle.
Put this part horizontally on top of the container, sticker to the right.
The paper recycling container is finished! Great job! Mount it vertically to the left of the glass container, but leave one column without knobs empty between the two containers. The slit on the front side surface is for throwing in wastepaper.
Collect the following 3 pieces:
1 transparent brown bottle,
1 transparent green bottle,
and 1 transparent bottle.
Put the bottles on the rightmost three knobs in front of the right container in whichever order you like.
Collect the following 5 pieces:
2 dark stone grey flat tiles 2x4,
2 dark stone grey flat tiles 1x2,
and 1 dark stone grey flat tile 1x4.
Put 1 flat tile 1x2 horizontally on the frontmost row, starting from the right edge.
Put 1 flat tile 2x4 horizontally to the left, one row overhanging to the front.
Put the flat tile 1x4 horizontally to the left.
Put the other flat tile 2x4 horizontally to the left, one row overhanging to the front.
Put the other flat tile 1x2 horizontally to the left.
Collect the following 3 pieces:
1 dark green dustbin 2x2x2,
1 dark stone grey shovel,
and 1 reddish brown broom.
Put the dustbin in the free area to the left of the two containers. Put the handles of the broom and shovel into the dustbin.
Find 3 white flat tiles 2x2.
Lay them in front of the left container. You can use these as wastepaper to throw into the paper bin.
The recycling container station is finished! Great job! Use the hook on the crane truck to lift the containers off of the station. You can empty them by opening the doors at the back of the containers. Now, the citizens of LEGO City can help Shirley Keeper make the city even cleaner!
To mount the recycling container station on the rest of the town center structure, turn the recycling container station vertically, the two overhanging columns to the right. Connect these two overhanging columns with the two vertical cutouts on the left behind the car wash.

Next, we will build the small park with bench and kids' ride.

Collect the following 2 pieces:
1 dark green plate 8x16,
and 1 dark stone grey flat tile 1x2.
Put the plate 8x16 horizontally on the table.
Put the flat tile 1x2 horizontally on the backmost row, starting from the right edge.
Collect the following 4 pieces:
1 dark stone grey flat tile 2x4 (with print),
1 dark stone grey flat tile 2x4 (without print),
1 dark stone grey flat tile 1x4,
and 1 dark stone grey flat tile 1x2.
Put the flat tile 2x4 without print horizontally to the left of the previous piece, one row overhanging to the back.
Put the flat tile 1x4 horizontally to the left.
Put the flat tile 2x4 with print horizontally to the left, one row overhanging to the back. This tile is printed with lane markings.
Put the flat tile 1x2 horizontally to the left.
Find 2 black smooth roof tiles 1x2x⅔.
Put them horizontally next to each other on the fourth row from the front, starting from the right edge, slopes to the back.

Next, we build the park bench.

Find 1 dark stone grey plate 1x2 with vertical clasp on short side.
Put it vertically on the table, clasp to the back.
Find 1 dark orange plate 2x4.
Put it horizontally on top, three columns overhanging to the left.
Find 1 dark stone grey plate 1x2 with vertical clasp on short side.
Put it vertically underneath the previous piece on the left edge, clasp to the back.
Find 2 dark orange plates 1x2.
Put 1 vertically underneath the previous piece.
Repeat symmetrically on the right.

Next, let's make the backrest of the bench.

Collect the following 2 pieces:
1 dark orange flat tile 1x4,
and 1 dark stone grey plate 1x2 with shaft on short side.
Put the plate 1x2 with shaft vertically on the table, shaft to the front.
Put the flat tile 1x4 horizontally on the back knob, tile overhanging to the left.
Find 1 dark stone grey plate 1x2 with shaft on short side.
Put it vertically underneath the previous piece on the left edge, 1 knob overhanging to the front and shaft to the front.
Find 1 dark orange flat tile 1x4.
Put it horizontally on the front row.
Now snap the shafts of the backrest into the clasps of the bench. Fold it up so that the backrest is upright, but slightly tilted to the back.
The park bench is finished! Well done! Mount it horizontally to the left of the two roof tiles. Make sure the front surface of the bench and the roof tiles form one line.

Now, we will make the base of the kids' ride.

Collect the following 2 pieces:
1 medium stone grey plate 2x2 with 2 centered bottom tubes,
and 1 dark orange round plate 2x2.
Put the plate with bottom tubes on the table, tubes running from left to right.
Put the round plate 2x2 on top.
Find 2 black bricks 1x2 with side connector.
Turn 1 vertically, connector pointing to the left, and insert the connector into the tube on the right.
Repeat symmetrically on the left.
Mount the base of the kids' ride horizontally in front of the roof tiles on the structure.
Find 2 black smooth roof tiles 1x2x⅔.
Put them horizontally in front of the base of the kids' ride, slopes to the front.

Next up, we build the kids' ride.

Collect the following 2 pieces:
1 dark green plate 2x3,
and 1 bright yellow plate 1x2.
Put the plate 2x3 horizontally on the table.
Put the plate 1x2 vertically on the right column.
Find 2 flame yellowish orange bottom angle plates 1x1 - 1x1 with side knob.
Put 1 on the back knob of the middle column, side knob to the back.
Repeat symmetrically at the front.
Find 1 bright yellow bottom angle plate 1x2 - 1x2 with 2 side knobs.
Put it vertically on the left column, side knobs to the left.
Collect the following 2 pieces:
1 bright red plate 1x2 with 1 knob,
and 1 bright red curve tile 1x2 with fin.
Put the plate with 1 knob vertically on the middle column.
Put the curve tile with fin vertically on the right column, fin to the right.
Find 1 bright red plate 1x2 with angled top handle.
Put it vertically on the left column, angle to the right.
Find 2 white round tiles 1x1. (These pieces are printed.)
Put them upright on the 2 side knobs on the left side.
These tiles are printed with googly eyes!
Find 2 bright green plants with plate 1x1.
Put 1 upright on the side knob at the back, leaves pointing to the top.
Repeat symmetrically at the front.
The kids' ride is finished! Mount it vertically on the base, googly eyes to the front. You can actually rock the ride back and forth! Maybe baby wants to try it?
Collect the following 3 pieces:
2 medium stone grey flat tiles 1x1,
and 1 medium stone grey quarter-arched tile 1x4.
These pieces will be used to make a small garden patch in the form of a quarter circle located in the front left corner. This can be a bit tricky, so listen carefully.
Put the flat tile 1x1 on the front row on the fifth knob from the left.
Put the other flat tile 1x1 on the leftmost column on the fifth knob from the front.
Mount the quarter-arched tile 1x4 so that it connects the two previous pieces. Together, these 3 pieces form a quarter circle.
Find 2 bright green round plates 1x1.
Put 1 on the front row on the fourth knob from the left.
Put the other one on the leftmost column on the fourth knob from the front.
Find 2 bright green plants with plate 1x1.
Put them on top of the previous pieces, leaves protruding over the flat tiles.
Find 1 dark green small spruce tree.
Mount it centered in this quarter-circle patch.
The small park with bench and kids' ride is finished! Well done! This is a wonderful little resting place in the middle of the bustling LEGO City town center. Enjoy the green grass and the relaxing bench while baby can have some fun in the kids' ride.
To mount the small park on the rest of the town center structure, connect the two overhanging rows at the back with the 2 horizontal cutouts at the front of the rightmost road plate.

Open bag number 8. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the pizza chef Minifigure and the pizza restaurant.


Next, we will build the pizza chef Minifigure.

Collect the following 2 pieces:
1 white and bright yellow upper part of the body,
and 1 dark green pair of legs.
Put the upper body on top of the legs.
Collect the following 2 pieces:
1 white chef's hat,
and 1 bright yellow head.
Put the head on top, and the hat on the head.
Collect the following 2 pieces:
1 reddish brown paddle (this will serve as the pizza shovel),
and 1 white flat tile 2x2. (This piece is printed.)
Snap the paddle into the pizza chef's right hand.
Snap the flat tile 2x2 into his left hand. The tile is printed with a pizza box: it has a red stripe on top and a green stripe at the bottom. The stripe in the middle is white, so this is actually the Italian flag! And in the white stripe, the word "PIZZA" is printed in green letters in all caps.
The pizza chef Minifigure is finished! Well done! He has a moustache and a happy smile on his face. He is wearing green pants, a white chef's jacket with two rows of buttons, and a red scarf. Let's see what tasty creations he will pull out of the pizza oven!

Next, we will build the pizza restaurant and martial arts dojo. This building has two levels: the pizza restaurant on the ground floor, and the martial arts dojo on the first floor. We will start with the pizza restaurant.

Collect the following 4 pieces:
3 medium nougat brown profile bricks 1x2 with brick carvings,
and 1 medium stone grey plate 16x16.
Put the plate 16x16 on the table. Make sure it forms straight rows and columns in front of you.
Put the profile bricks vertically on the rightmost column, starting from the front. Make sure the brick carvings are to the right, and the horizontal line carvings are to the left.
Find 1 maroon red brick 1x1x5.
Put it on the back knob of the backmost brick 1x2 with brick carvings.

Now, we assemble the pizzeria door.

Find 1 bright red door frame 1x4x6.
Put it horizontally on the table, inner notches to the front.
Find 1 transparent glass door with handle for frame 1x4x6.
Snap the glass door into the notches on the left, handle on the right, door opening towards you.
Find 1 bright red round plate 1x1.
Put it upright on the door knob.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 small rectangular sticker number 10.
Put it horizontally in the middle of the door in the upper half.
The sticker is bright red, and the word "OPEN" is written on it with white letters. The word is underlined with a white stripe.
The pizzeria door is finished! Turn it left to right so that the door handle is pointing to the back. Mount it horizontally to the left of brick 1x1x5. It should open towards the back.
Collect the following 4 pieces:
3 medium nougat brown profile bricks 1x2 with brick carvings,
and 1 white brick 1x1.
Put 1 profile brick 1x2 horizontally to the left of the door, brick carvings to the back, horizontal carving to the front.
Put 1 profile brick 1x2 horizontally to the left, brick carvings to the back.
Put 1 profile brick 1x2 horizontally to the left, brick carvings to the back.
Put the brick 1x1 in front of the left knob of the previous piece.
Find 3 medium nougat brown profile bricks 1x2 with brick carvings.
Put 1 vertically to the left of the two previous pieces, brick carvings to the left.
Put 1 vertically in front of the previous piece, brick carvings to the left.
Put the last one vertically in front of the previous piece, brick carvings to the left.
You have just created the wall outline of the pizza restaurant.
Collect the following 2 pieces:
1 white round brick 2x2 with top cross hole,
and 1 white brick 1x1.
Put the round brick 2x2 in front of the single brick 1x1 that is in the back left corner of the wall outline.
Put the brick 1x1 in front of the previous piece, again touching the bricks with brick carvings.
Find 2 white quarter-arched bricks 2x2 with 2 knobs.
Put 1 to the right of the brick 1x1 in the back left corner of the wall outline, hugging the round brick 2x2 towards the front.
Put the other one to the right of the brick 1x1 at the front, hugging the round brick 2x2 towards the back.
Collect the following 3 pieces:
2 maroon red quarter-arched tiles 2x2,
and 1 black round plate 2x2.
Put the 2 quarter-arched tiles 2x2 on top of the two previous pieces.
Put the round plate 2x2 to the left of the two previous pieces so it is being hugged by them. This is the stove of the pizza oven!
Collect the following 2 pieces:
1 bright red rounded plate 1x2,
and 1 pale ocher yellow round tile 2x2. (This piece is printed.)
Put the round plate 1x2 vertically on the left column of the previous piece.
Put the round tile 2x2 to the right of the previous piece. It will only attach to two knobs.
This piece is printed with a peperoni pizza with black olive rings! It is already cut into 8 slices and looks like it's ready to serve.
Collect the following 4 pieces:
2 medium nougat brown bricks 1x1,
and 2 transparent bright orange single flames.
Put 1 brick 1x1 on the knob behind the rounded plate 1x2.
Put the other brick 1x1 on the knob in front of the rounded plate 1x2.
Insert the shafts of the single flames into the two hollow knobs between the two previous pieces.
Find 1 maroon red brick 1x6.
Put it vertically on top of the left column of the wall outline.

Next up, we will assemble the side window.

Collect the following 2 pieces:
1 maroon red brick 1x4,
and 1 bright red frame 1x4x3.
Put the brick 1x4 vertically on the table.
Put the frame 1x4x3 vertically on top, inner notches to the right.
Find 1 transparent glass for frame 1x4x3.
Snap the bumps on the glass into the top notches from the right. If done correctly, the window opens at the bottom towards the right.
Find 1 maroon red brick 1x4.
Put it vertically on top.
The window is finished! Well done! Mount it vertically on the rightmost column to the right of the door. The front knob of this column remains empty.
Find 1 maroon red brick 1x1x5.
Put it on the frontmost knob of the rightmost column.
Find 3 white wall elements 1x2x2 with 2 top knobs.
These pieces will form the counter.
Put 1 horizontally on the third row from the front to the left of the window, panel to the back.
Put another one horizontally to the left of the previous piece, panel to the back.
Put the last one vertically to the left of the previous piece, panel to the right, leaving the frontmost knob of this column empty.
Collect the following 2 pieces:
1 bright red corner plate 2x2,
and 1 bright red plate 1x3.
Put the corner plate 2x2 on top of the two previous pieces.
Put the plate 1x3 horizontally to the right.
Find 1 white roof tile 2x2, 45°. (This piece is printed.)
Put it on the left corner of the counter you have just built, slope to the front.
The piece is printed with a light blue cash register with keypad, enabling contactless payment and card payment.

Next, we build the front window with awning.

Collect the following 2 pieces:
1 transparent wall element 1x6x5 with 6 top knobs and sides,
and 1 medium stone grey plate 1x6.
Put the wall element 1x6x5 horizontally on the table, hollow to the back.
Put the plate 1x6 horizontally on top.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 9. Ask a sighted person to help you find the correct sticker.
Put it upright vertically in the bottom left corner.
The sticker is white, at the top there is a banner in the colors of the Italian flag (red, white, and green) and in the middle, there is a slice of pepperoni pizza on a green star-shaped background.
Collect the following 6 pieces:
3 bright red arched bricks 1x1 with protruding plate,
and 3 white arched bricks 1x1 with protruding plate.
Put 1 bright red brick vertically on the leftmost knob, protruding plate to the back, brick overhanging to the front. This means that it is the protruding plate that connects with the knob.
Put 1 white brick vertically to the right in the same way as the previous one.
Put another bright red brick to the right.
Put another white brick to the right.
Put the last bright red brick to the right.
Put the remaining white brick to the right.
Find 1 medium stone grey plate 1x6.
Put it horizontally on top.
The front window with awning is finished! Great job! First, turn the whole structure left to right. This means, that the small window is now on the left side, and the door knob is facing you.
Mount the front window with awning horizontally to the right of the door, awning overhanging to the front.
Collect the following 2 pieces:
1 white brick 1x4 with 4 side knobs,
and 1 maroon red brick 1x6.
Put the brick with side knobs horizontally on top of the door, side knobs to the front.
Put the brick 1x6 vertically on the leftmost column, starting from the back.
Find 1 medium nougat brown brick 1x4x2 with inside arch.
First, turn the structure right to left again. The small window is on the right side again, and the awning and door knob are pointing to the back.
Mount the brick with inside arch vertically above the 2 single flames. This is the 6th column from the left.
Find 2 white corner roof tiles 2x2 with 2 slopes, 45°.
Put 1 on the 2 back knobs of the previous piece, overhanging to the right, slopes to the back and right.
Put the other one in front of the previous piece, overhanging to the right, slopes to the right and front.
Find 2 black palisade bricks 1x2.
Put 1 vertically on top of the two previous pieces.
Put the other one vertically on top of the previous piece.
Find 1 maroon red wall element 1x6x5 with 6 top knobs and sides.
Put it vertically to the left of the pizza oven, hollow to the right.
Collect the following 3 pieces:
1 black roof tile 2x2, 45°,
and 2 maroon red bricks 1x1.
Put 1 brick 1x1 on top of the previous piece on the second knob from the back.
Put the roof tile 2x2 in front of the previous piece, slope to the right. Make sure it connects with the palisade bricks to the right of the wall. Together, these pieces form the chimney.
Put the other brick 1x1 in front of the previous piece.
You have just finished the pizza oven! Excellent!
Find 2 maroon red bricks 1x6.
Put 1 horizontally on the 6th row from the front, starting from the right edge. This is the wall with door and large window.
Put the other one horizontally to the left.
Find 1 maroon red brick 1x4.
Put it vertically on the rightmost column, leaving the frontmost knob empty.
Find 1 dark stone grey brick 1x12.
Put it horizontally on the frontmost row at the top, starting from the right edge, connecting the left and right walls.
Collect the following 8 pieces:
2 pale ocher yellow flat tiles 1x6,
4 pale ocher yellow plates 1x4 with 2 knobs,
and 2 pale ocher yellow flat tiles 1x2.
Put 1 flat tile 1x6 vertically on the rightmost column, starting from the front.
Put 1 plate 1x4 horizontally to the left of the previous piece on the back row of the pizzeria walls.
Repeat symmetrically at the front.
Put 1 flat tile 1x2 horizontally to the left of the previous piece.
Repeat symmetrically on the back row of the walls.
Put 1 plate 1x4 horizontally to the left of the previous piece.
Repeat symmetrically at the front.
Put the remaining plate 1x6 vertically to the left of the two previous pieces.
Find 1 white flat tile 2x4.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 15. Ask a sighted person to help you find the correct sticker.
Put it on the flat tile.
The sticker is mostly white, there is an Italian flag banner at the bottom. Half a pepperoni pizza is printed on the top stripe of the flag (the red one) on the right half of the sticker, which makes it look like a rising sun. To the left of the pizza is the name of the pizza restaurant: "CITY PIZZA". The lettering is designed with white letters on a green background and with a black outer frame.
Turn the structure left to right again so that the side window is on the left and the door knob pointing to the front.
Mount the sign upright horizontally on the side knobs pointing to the front above the door.

Open bag number 9. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the storage shed of the pizzeria and the first part of the martial arts dojo.


Next, let's build the storage shed of the pizzeria.

It is used for storing pizza boxes. There is a fire in the storage shed, but not to worry, it can easily be put out by the firefighter.
Find 1 reddish brown door frame 1x4x6.
Put it horizontally on the backmost row, starting from the right.

Next up, we will make the fire.

Collect the following 2 pieces:
1 reddish brown brick 1x2 with technic hole,
and 1 dark stone grey cross axle 4m with end stop. (This piece is 4 knobs long.)
Put the brick 1x2 horizontally on the table.
Insert the cross axle into the hole from the back towards the front, end stop at the back.
Collect the following 2 pieces:
1 bright red t-shaped cross axle joint 2m (this piece is 2 knobs long),
and 1 transparent bright orange flame with 5 fire tongues.
Hold the t-shaped joint so that the single cross hole is pointing to the top.
Insert the shaft of the flame into this cross hole.
Push the cross hole at the bottom of this part onto the cross axle from the front until it touches the brick. Hold the end stop from behind to ensure a tight fit.
Collect the following 2 pieces:
1 reddish brown brick 1x2 with technic hole,
and 1 black double conical wheel 1m with 12 teeth.
Put the brick 1x2 horizontally on the cross axle from the front.
Put the double conical wheel on the cross axle from the front.
Find 1 reddish brown plate 2x3.
Put it vertically underneath the part.
The fire is finished! Mount this part horizontally in front of the door frame at the right back, double conical wheel to the right. You can use the wheel to turn the flame: when it is pointing up, it is time for the firefighter to put it out with her fire extinguisher. As soon as she is done, turn the flame down, and the fire will have disappeared.
Collect the following 2 pieces:
1 reddish brown door frame 1x4x6,
and 1 white plate 1x2.
Put the door frame 1x4x6 horizontally in front of the fire.
Put the plate 1x2 horizontally centered in front of the previous piece.

Now, we will make a stack of empty pizza boxes.

Find 2 white plates 2x2 with 1 knob.
Stack them on top of each other.
Find 1 white plate 2x2 with 1 knob.
Put it on top of the two previous pieces.
Find 1 white plate 2x2.
Put it on top of the previous piece.
Collect the following 2 pieces:
1 white plate 1x2,
and 1 white plate 1x2 with side rail.
Put the plate 1x2 with side rail horizontally on the back row.
Put the plate 1x2 horizontally on the front row.
Find 1 white flat tile 2x2. (This piece is printed.)
Put it on top. It is printed like a pizza box, again with the colors of the Italian flag and the word "PIZZA" written in all caps in the middle of the box.
Mount the stack of empty pizza boxes centered on the front door frame of the storage shed and the plate 1x2 in front of it.
Find 2 dark stone grey roof tiles 2x4, 18°.
Put 1 vertically on the two door frames on their left halves, slope to the front.
Put the other one vertically to the right of the previous piece, slope to the front.
The pizza restaurant is finished! Well done! The firefighter can now do her best to put out the fire while the pizza chef can bake some delicious pizza.

Now, we will build the martial arts dojo.

Collect the following 2 pieces:
1 pale ocher yellow brick 1x1,
and 1 pale ocher yellow plate 6x12.
Put the plate 6x12 horizontally on the table.
Put the brick 1x1 in the rightmost backmost corner.
Collect the following 3 pieces:
2 sand green flat tiles 1x4,
and 1 pale ocher yellow brick 2x2x3.
Put 1 flat tile 1x4 horizontally to the left of the previous piece on the back row.
Put the brick 2x2x3 to the left.
Put the other flat tile 1x4 horizontally to the left.
Collect the following 2 pieces:
1 pale ocher yellow brick 1x1x3 with 2 horizontal side clasps,
and 1 pale ocher yellow brick 1x1.
Put the brick 1x1x3 with 2 clasps on the backmost rightmost corner, clasps to the back.
Put the brick 1x1 on top.
Find 1 pale ocher yellow brick 1x1x5.
Put it in front of the two previous pieces.
Find 2 pale ocher yellow bricks 1x2x5.
Put 1 vertically in front of the previous piece.
Put the other one vertically in front of the previous piece.

Next, we assemble the 2 front windows.

Find 1 sand green door frame 1x4x6.
Put it flat on the table, inner notches to the top.
Find 1 transparent glass for frame 1x4x6.
Snap it into the inner notches.
Find another frame 1x4x6 and another glass for frame 1x4x6.
Assemble the second window just like the first one.
Mount the first window horizontally on the second row from the back in front of the right flat tile 1x4, window glass to the back.
Repeat symmetrically on the left.
Find 3 pale ocher yellow bricks 1x2x5.
Put them vertically next to each other on the leftmost column.
Find 1 pale ocher yellow brick 2x2x3.
Put it between the two windows at the back.
Find 2 pale ocher yellow bricks 1x6.
Put 1 vertically on the rightmost column.
Repeat symmetrically on the left.
Collect the following 3 pieces:
2 sand green plates 1x6,
and 1 sand green plate 1x2.
Put the 2 plates 1x6 horizontally next to each other on the second row from the back, spanning across the windows.
Put the plate 1x2 horizontally centered on the backmost row.

Next, we build the sword showcase.

Collect the following 2 pieces:
1 reddish brown plate 2x2 with 2 knobs,
and 1 reddish brown palisade brick 1x2.
Put the plate 2x2 on the table, knobs to the back.
Put the palisade brick 1x2 horizontally on top.
Collect the following 2 pieces:
1 reddish brown plate 1x1 with horizontal side clasp,
and 1 reddish brown plate 1x1.
Put the plate 1x1 with horizontal side clasp on the left knob, clasp to the front.
Put the plate 1x1 on the right knob.
Collect the following 2 pieces:
1 reddish brown palisade brick 1x2,
and 1 reddish brown plate 1x2 with 1 knob.
Put the palisade brick 1x2 horizontally on top.
Put the plate 1x2 horizontally on top.
Collect the following 2 pieces:
1 dark orange inverted cone 1x1 with shaft,
and 1 medium stone grey round tile 1x1.
Insert the shaft of the inverted cone into the knob of the previous piece.
Put the round tile 1x1 on top.
Find 1 warm gold katana sword.
Snap the handle of the sword into the clasp.
The sword showcase is finished! Great job! Turn it left to right, and then mount it centered in front of the right window. Make sure the sword is facing the window.
Collect the following 3 pieces:
2 bright red flat tiles 2x4,
and 1 earth blue kendo mask. (This is a face mask worn in some martial arts.)
Put 1 flat tile 2x4 horizontally centered on the 2 back rows of the low part.
Put the other flat tile 2x4 horizontally in front of the previous piece.
Put the kendo mask over the inverted cone on the showcase at the right.
Collect the following 2 pieces:
1 reddish brown plate 2x2 with 1 knob,
and 1 dark brown barrel 2x2.
Put the barrel 2x2 centered in front of the left window.
Put the plate 2x2 in the front left corner of the low part.
Collect the following 2 pieces:
1 dark orange inverted cone 1x1 with shaft,
and 1 medium stone grey round tile 1x1.
Put the round tile 1x1 on top of the inverted cone.
Insert the shaft of the inverted cone into the knob in the front left corner.
Collect the following 3 pieces:
1 earth blue kendo mask,
and 2 reddish brown katana swords.
Put the kendo mask over the inverted cone in the front left corner.
Put the katana swords into the barrel.
Find 2 sand green plates 1x1.
Put 1 on the backmost knob of the leftmost column.
Repeat symmetrically on the right.
Find 2 sand green plates 1x4.
Put 1 vertically on the rightmost column, starting from the front.
Repeat symmetrically on the left.
Collect the following 3 pieces:
2 pale ocher yellow bricks 1x1,
and 1 pale ocher yellow brick 1x2x2.
Put the brick 1x2x2 horizontally centered on the backmost row.
Put 1 brick 1x1 on the backmost knob of the leftmost column.
Repeat symmetrically on the right.
Find 2 pale ocher yellow bricks 1x1.
Put them on top of the two previous pieces.
Find 2 sand green half circle windows 1x4x1⅔ with 3 bars.
Put 1 horizontally on the second row from the back above the right window, bars to the front.
Repeat symmetrically on the left.
Find 2 pale ocher yellow bricks 1x6x2 with inside arch.
Put them horizontally on top of the two previous pieces, half arches hugging the half circle windows.
Find 2 pale ocher yellow bricks 1x1.
Put 1 on the leftmost column on the third knob from the back.
Repeat symmetrically on the right.
Find 2 pale ocher yellow bricks 1x3.
Put 1 vertically in front of the previous piece.
Repeat symmetrically on the left.
Find 2 pale ocher yellow bricks 1x3.
Put 1 vertically on top of the previous piece, but leave the frontmost knob empty.
Repeat symmetrically on the right.
Find 1 pale ocher yellow brick 1x12.
Put it horizontally in front of the two previous pieces, connecting the left and right walls.
Collect the following 8 pieces:
1 pale ocher yellow flat tile 1x2,
4 pale ocher yellow plates 1x4 with 2 knobs,
2 pale ocher yellow flat tiles 1x6,
and 1 pale ocher yellow flat tile 2x2.
Put the flat tile 2x2 on the 4 knobs in the middle of the 2 backmost rows.
Put 2 plates 1x4 horizontally to the left and right of the previous piece.
Put the flat tile 1x2 horizontally centered on the frontmost row at the top.
Put the other 2 plates 1x4 horizontally to the left and right of the previous piece.
Put 1 flat tile 1x6 vertically on the rightmost column.
Repeat symmetrically on the left.
Now it is time to mount the dojo: turn the dojo so that its windows are facing you. Mount it horizontally on top of the pizza restaurant.
Collect the following 2 pieces:
1 warm gold tassel with knob,
and 1 warm gold shaft 4m. (This piece is 4 knobs long.)
Insert the shaft into the knob of the tassel.
Snap the shaft into the two clasps on the left side of the martial arts dojo front. Make sure the tassel is at the bottom.
Find 1 bright red flat tile 2x4.
Put it vertically on the table.
Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.
Find 1 rectangular sticker number 16. Ask a sighted person to help you find the correct sticker.
Put it on top of the tile.
The sticker is dark red at the top, the bottom quarter is white. The red part contains the logo of the martial arts dojo: a white circle with the black silhouette of a dragon head. Beneath it is a symbol for a dojo in white. In the white part of the sticker, black writing says "DRAGON DOJO" in all caps that is underlined with a black katana sword.
Find 1 black plate 1x2 with 2 vertical clasps on long side.
Put it vertically centered underneath the right column of the flat tile, clasps to the right.
Now, snap the two clasps onto the middle of the shaft on the shop front. Let the sign stick out towards the front so that passers-by will be able to read it when walking past the dojo.
The Dragon Dojo is finished! Fantastic! Now the martial arts instructor can set everything up to practice and teach his ancient art.

Open bag number 10. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the roof garden of the building with pizza restaurant and martial arts dojo, as well as all pieces for the Madison Minifigure.


Next, we will build the roof garden.

Collect the following 2 pieces:
1 medium stone grey brick 1x1x2 with scroll and open knob,
and 1 dark stone grey plate 6x12.
Put the plate 6x12 horizontally on the table.
Put the brick with scroll on the frontmost rightmost knob, scroll to the front.
Collect the following 5 pieces:
2 medium stone grey bricks 1x4 with sliding groove,
and 3 medium stone grey bricks 1x1x2 with scroll and open knob.
Put 1 brick with sliding groove horizontally to the left of the previous piece, groove to the front.
Put 2 bricks with scroll to the left, scrolls to the front.
Put the other brick with sliding groove horizontally to the left, groove to the front.
Put the remaining brick with scroll to the left, scroll to the front.
Find 2 medium stone grey roof tiles 1x4x1, 18°.
Turn the structure left to right. The bricks you have just mounted are now at the back.
Put 1 vertically on the rightmost column, slope to the front. Leave the frontmost knob empty.
Repeat symmetrically on the left.
Collect the following 2 pieces:
1 reddish brown brick 1x8,
and 1 reddish brown round brick 2x2 with top cross hole.
Put the round brick 2x2 into the right back corner of the lower part.
Put the brick 1x8 horizontally to the left of the previous piece on the second row from the back.
Find 2 medium nougat brown palisade bricks 1x4.
Put them horizontally in front of the previous piece.
Find 2 dark stone grey roof tiles 1x2, 45°.
Put 1 vertically on the rightmost column, slope to the front, leaving the backmost knob empty.
Repeat symmetrically on the left.
Collect the following 5 pieces:
4 dark stone grey roof tiles 1x2, 45°,
and 1 dark stone grey brick 1x2.
Put 1 roof tile 1x2 horizontally to the right of the previous piece, slope to the right.
Put 1 roof tile 1x2 horizontally to the right, slope to the left.
Put the brick 1x2 horizontally to the right.
Put 1 roof tile 1x2 horizontally to the right, slope to the right.
Put the last roof tile 1x2 horizontally to the right, slope to the left.
Collect the following 3 pieces:
2 dark stone grey flat tiles 1x2,
and 1 dark stone grey flat tile 1x4.
Put 1 flat tile 1x2 horizontally on top of the previous piece and the knob to its right.
Repeat symmetrically on the left.
Put the flat tile 1x4 horizontally on the 4 knobs in the middle of this row.
Collect the following 4 pieces:
2 bright yellowish green stems of curly grass,
and 2 dark green plants with plate 1x1.
Put 1 stem of curly grass on the left back knob inside the wall corner.
Skip one knob to the right, and put the other stem of curly grass on the same row.
Skip one knob to the right, and put 1 plant 1x1 on the same row.
Skip one knob to the right, and put the other plant 1x1 on the same row.
Find 2 bright green shafts 2m with twig leaves. (These pieces are 2 knobs long.)
Insert their shafts into the knobs of the two plants with plate 1x1.
Next, we will make a cherry tree.
Collect the following 4 pieces:
1 dark green plant element with 14 knobs,
and 3 bright red cherries.
Put the plant element flat on the table, knobs to the top.
Insert the small shafts of the cherries into three knobs of your choice, but make sure to leave the knob in the center of the element empty.
Find 1 reddish brown l-shaped shaft 5m x 2m.
Turn it upright so that the shorter shaft is at the top. Take the plant element, and insert the shorter shaft into the middle hole of the plant element from the back.
Now, insert the bottom end of the longer shaft into the top hole of the round brick 2x2 in the right corner of the structure, plant element and cherries to the back.
Collect the following 3 pieces:
1 medium stone grey plate 1x2 with 1 knob,
and 2 medium stone grey plates 1x1.
Turn the structure left to right so that the 4 protruding knobs and the cherry tree are facing the front.
Put the plate 1x2 horizontally on the 2 protruding knobs in the middle.
Put the 2 plates 1x1 on the protruding knobs on the left and right.
Find 3 dark stone grey Minifigure statues.
Put them on the 3 previous pieces.
The roof garden is finished! Very well done! Now, mount it horizontally on top of the martial arts dojo. Make sure that the Minifigure statues are at the front.
Find 2 white fence elements 1x4x2.
Put 1 vertically on the leftmost column in front of the pizza restaurant.
Put the other one vertically in front of the previous piece.
Find 2 white bricks 1x1.
Stack them on top of each other.
Put them in front of the previous piece.
Next we will make the cobbled path to the pizza restaurant and martial arts dojo. It runs from the front left towards the door of the pizza restaurant, and it will consist of round tiles in different sizes. This will be quite tricky, so do ask for help if it does not work out.
Collect the following 3 pieces:
2 pale ocher yellow round tiles 2x2,
and 1 medium nougat brown round tile 1x1.
Skip 1 column from the fence on the left, and put 1 round tile 2x2 in front of the restaurant door.
Put the round tile 1x1 to the right of the previous piece, also in front of the restaurant door.
Put the other round tile 2x2 in front of the previous piece. Since it is bigger than the previous piece, it will extend slightly to the right.
Collect the following 4 pieces:
2 pale ocher yellow round tiles 2x2,
and 2 medium nougat brown round tiles 1x1.
Put 1 round tile 1x1 on the knob to the left of the previous piece.
Put 1 round tile 2x2 in front of the previous piece. Let it extend to the left rather than the right.
Put the other round tile 1x1 on the knob to the right of the previous piece.
Put the other round tile 2x2 in front of the previous piece, slightly extending to the right.
Collect the following 5 pieces:
2 pale ocher yellow round tiles 2x2,
and 3 medium nougat brown round tiles 1x1.
Put 1 round tile 1x1 on the knob to the left of the previous piece.
Put 1 round tile 2x2 in front of the previous piece, slightly extending to the left.
Put 1 round tile 1x1 on the knob to the right of the previous piece.
Put the other round tile 2x2 in front of the previous piece, slightly extending to the right.
Put the last round tile 1x1 on the knob to the left of the previous piece.
The cobbled path is finished! Very well done, that was hard!

Next up, we build a high table for the pizza restaurant.

Collect the following 2 pieces:
1 dark stone grey support stand 2x2x2,
and 1 bright red round tile 2x2.
Put the round tile 2x2 on top.
Put the high table in front of the right wall corner of the pizza restaurant.
Collect the following 5 pieces:
2 dark stone grey flat tiles 1x2,
1 dark stone grey flat tile 1x4,
1 dark stone grey flat tile 2x4 (with print),
and 1 dark stone grey flat tile 2x4 (without print).
Put 1 flat tile 1x2 horizontally on the frontmost row, starting from the left edge.
Put the flat tile 2x4 with print horizontally to the right of the previous piece, 1 row overhanging to the front.
This piece is printed with lane markings.
Put the flat tile 1x4 horizontally to the right.
Put the other flat tile 2x4 without print horizontally to the right, 1 row overhanging to the front.
Put the other flat tile 1x2 horizontally to the right.
The building with pizza restaurant and martial arts dojo is finished! Fantastic job! To mount it on the rest of the town center structure, connect the two overhanging rows at the front with the 2 horizontal cutouts at the back of the right road plate.

Finally, we will build the Madison Minifigure.

Collect the following 3 pieces:
1 white pair of kids' legs,
1 white and earth blue kids' upper part of the body,
and 1 bright yellow head.
Assemble the Minifigure: put the upper body on top of the legs, and then put the head on top.
Find 1 hairpiece with pigtails.
Put it on the head.
The Madison Minifigure is finished! Well done! She has a happy smile on her face and looks like she is ready to practice some martial arts! She is wearing a white martial arts uniform with a brown stomach binder and a blue chest shield as well as blue gloves.

The LEGO City Town Center is finished! Fantastic job! Now it is finally time to roam the bustling town center: get a pizza and enjoy it in the park, learn some cool martial arts moves, take a little trip with your electric car (but don't forget to charge it first!), take care of this week's recycling, or simply take a walk on the streets of LEGO City.


Enjoy!