LEGO 60274 Elite Police Lighthouse Capture

LEGO Audio & Braille Building Instructions for the LEGO City set "Elite Police Lighthouse Capture".

Crook Vito has returned to his hideout in an offshore lighthouse to collect a hoard of stolen treasure. Grab the night vision goggles and head to the scene with Rooky Partnur aboard the reconnaissance helicopter. But hurry, Vito is escaping on a makeshift raft with a powerful motor! Help Rooky dodge the circling shark and swoop in to catch that crook and save the day!
The box cover shows an action-packed scene in LEGO City bay. At the front left, there is the lighthouse on a huge rock. Right next to it in the water, Vito is trying to escape on his raft. On the right, the shark is jumping out of the water. But Rooky Partnur is already chasing after Vito in her state-of-the-art helicopter complete with landing buoys, searchlight, and exterior camera. In the bottom right corner, there is a portrait image of Rooky Partnur and one of Vito. Who will win?
Open the box. This can be tricky; ask someone to help you!
The box contains two booklets with visual building instructions, one sheet with stickers, a loose plate 2x16, and two numbered plastic bags; ask a sighted person to help you find the correct bag!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Vito Minifigure, the shark, the makeshift raft, and the lighthouse with jetty.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we will build the Vito Minifigure.

Collect the following 4 pieces:
1 bright yellow head,
1 black hairpiece,
1 bright red and bright yellow upper part of the body,
and 1 black pair of legs.
Assemble the Minifigure: put the upper body on the legs, the head on top, and the hairpiece on the head.
The Vito Minifigure is finished! Well done! Vito looks scruffy: he has dark circles around his eyes, a scar on his right cheek, and a thin moustache on his upper lip. His red-striped shirt is ripped at the bottom and at the breast pocket. The first few buttons of his shirt are open, and his chest hair is peeking out. What a sleazy crook! I wonder what he is up to.

Now, we will assemble the shark.

Find 1 dark stone grey shark body 6x9.
Find 1 dark stone grey shark jaw.
Snap the shark jaw onto the body.
The shark is finished! Its eyes look very grim and aggressive. Watch out!

Next, we build the makeshift raft.

Find 1 reddish brown plate 2x6.
Put it horizontally on the table.
Collect the following 2 pieces:
1 olive green plate 1x2,
and 1 medium stone grey bottom angle plate 1x2 - 2x2 with 4 side knobs.
Put the plate 1x2 horizontally on the front row in the middle.
Put the angle plate 2x2 horizontally behind the previous piece, side knobs to the back.
Find 4 reddish brown bottom angle plates 1x2 - 2x2 with 4 side knobs.
Put 2 horizontally to the left and right of the previous piece, side knobs to the back.
Repeat symmetrically on the front row.
Find 1 reddish brown plate 2x6.
Put it horizontally on top.
Find 1 reddish brown small panel element 1x2x1 with sides.
Put it vertically on the rightmost column, back panel to the right.
Find 1 reddish brown brick 2x4.
Put it horizontally to the left.
Find 1 reddish brown small panel element 1x2x1 with sides.
Put it vertically on the leftmost column, back panel to the left.

Next, let's build the raft motor.

Find 2 dark stone grey plates 1x2 with vertical clasp on short side.
Put them horizontally on the table. Place one in front of the other, clasps to the right.
Find 1 dark stone grey curve brick 2x2 with 2 knobs.
Put it on top, its knobs forming a column on the left side.
Find 2 dark stone grey technic bushings 1x1.
Put them upright on the two knobs.
The raft motor is finished! Great job!
Now, turn the motor upright and mount it on the middle 4 side knobs at the back side of the structure. Make sure the bushings are at the bottom. They are the jets of the raft.
If done correctly, the two clasps of the motor are now pointing to the top.
Find 2 reddish brown barrels 2x2.
Put them upright on the side knobs to the left and right of the raft motor.
Find 2 more reddish brown barrels 2x2.
Put them upright on the side knobs at the front of the structure.
Collect the following 2 pieces:
1 bright red crowbar,
and 1 warm gold wine glass 1x1.
Snap the crowbar into the two clasps at the back.
Put the wineglass on the leftmost knob of the front row.
Collect the following 3 pieces:
1 transparent red diamond with stick,
and 2 warm gold ingots 1x2.
Put the diamond in the small cavity on the left.
Put the 2 ingots into the small cavity on the right.
The makeshift raft is finished! Very well done! It is loaded with valuable treasures, ready to take Vito to his secret hideout.

Now, we build the lighthouse with jetty.

Collect the following 2 pieces:
1 bright blue plate 6x6,
and 1 dark stone grey roof tile 1x2, 45°.
Put the plate 6x6 on the table.
Put the roof tile 1x2 horizontally on the backmost row at the right edge, slope to the right.
Find 1 dark stone grey roof tile 2x2x2, 65°.
Put it in front of the previous piece, slope to the right.
Find 1 dark stone grey roof tile 2x2x2, 65°.
Put it on the backmost two rows to the left of the two previous pieces, slope to the back.
Find 1 olive green roof tile 1x2, 45°.
Put it horizontally to the left on the back row, slope to the left.
Find 1 dark stone grey curve brick 2x2 with 2 knobs.
Put it on the second and third row from the front on the right edge, knobs to the left.
Find 1 medium stone grey flat tile 2x3.
Put it vertically to the left. The front row remains empty.
Find 1 dark stone grey flat tile 1x6.
Put it horizontally on the front row.
Find 2 dark stone grey bricks 2x3.
Put 1 horizontally on the second and third row from the back, one column overhanging to the left.
Put the other one horizontally in front of the previous piece. Again, one column is overhanging to the left.
Find 1 medium stone grey brick 1x2 with vertical shaft on short side.
Put it vertically on the rightmost row on the two front knobs, shaft to the front.
Collect the following 2 pieces:
1 dark stone grey roof tile 1x2, 45°,
and 1 olive green plate 1x2.
Put the plate 1x2 vertically on the rightmost column on the two frontmost knobs.
Skip the leftmost column, and put the roof tile 1x2 horizontally on the second row from the back, slope to the left.
Collect the following 2 pieces:
1 olive green roof tile 1x2, 45°,
and 1 medium stone grey brick 2x2.
Put the brick 2x2 in front of the previous piece.
Put the roof tile 1x2 horizontally in front of the previous piece, slope to the left.
Find 1 bright blue plate 6x6.
Put it underneath the overhanging bricks on the left side.
Find 1 reddish brown palisade brick 1x2. This kind of brick has slightly rounded sides and becomes narrower in the middle.
Put it vertically on the leftmost column in the middle.
Find 1 reddish brown plate 2x6.
Put it horizontally on top, connecting the palisade brick on the left with the rest of the structure on the right. This is the jetty of the lighthouse!
Find 1 dark stone grey plate 4x4.
Put it on top starting from the right back corner of the structure.

Next up, we will make a small part.

Find 1 dark stone grey plate 1x3.
Put it horizontally on the table.
Collect the following 2 pieces:
1 dark stone grey brick 1x1 with clasp,
and 1 dark stone grey roof tile 1x2, 45°.
Put the roof tile 1x2 horizontally on the left two knobs, slope to the left.
Put the brick 1x1 to the right of the previous piece, clasp to the right.
Find 1 olive green plate 1x2.
Put it horizontally on top.
The small part is finished! To mount it, you have to snap its clasp onto the small shaft at the right front of the structure. This is actually a hidden door! To close it, swivel it towards the structure. Vito will be able to hide his treasures in the hollow behind the door. How sneaky of him!
Find 1 white round wall element 5x4x2.
Put it horizontally on the two back rows on the right edge, hollow to the front.
Find another white round wall element 5x4x2.
Put it horizontally in front of the previous piece, hollow to the back. You have created a round pillar now.
Find 1 bright red round brick 4x4 with top hole.
Put it on top.
Find 1 white round brick 4x4 with top hole.
Put it on top.
Find 1 bright red round brick 4x4 with top hole.
Put it on top.

In the next step, we build the lighthouse roof base.

Find 1 white round plate 6x6 with middle hole.
Put it on the table.
Find 1 black round plate 4x4 with middle hole.
Put it on top in the middle.
Now, mount the roof base centered on top of the lighthouse.
Find 2 transparent yellow round bricks 2x2 with top cross hole.
Stack them on top of each other.
Now, mount them centered on top of the lighthouse. This is the beacon light of the lighthouse!
Find 4 transparent wall elements 1x2x2 with 2 top knobs.
Put them around the beacon light, panels facing inwards. 2 of them horizontally in front of and behind the beacon light, 2 of them to the left and right of the beacon light.

Now, we will build the lighthouse roof.

Find 1 black round plate 4x4 with middle hole.
Put it on the table.
Find 1 black round brick 2x2 with sloped sides.
Put it on top in the middle.
Mount the roof on top of the lighthouse in the middle.

Next up, we assemble the fish bucket.

Find 1 bright red bucket 1x1x1.
Find 1 black bucket handle.
Snap the bucket handle onto the bucket. The handle has 2 small notches, and the bucket has 2 small bumps that fit perfectly together.
Find 1 silver metallic fish with knob.
Put it into the bucket.
You can place the fish bucket on the jetty, or wherever you like.
The lighthouse with jetty is finished! Great job! This is Vito's hideout. He will definitely come back with his loot soon!
We are all done with bag 1 now. Way to go! Time for the next bag!

Open bag 2 and any small sub-bags in it. You can choose to have the bricks sorted by color again.


Now, we will build the Rooky Partnur Minifigure.

Collect the following 4 pieces:
1 bright yellow head,
1 black hairpiece,
1 sand blue and black upper part of the body,
and 1 earth blue pair of legs.
Assemble the Minifigure: put the upper body on the legs, put the head on top, and finish off with the hair.

Next, let's make the police helmet.

Find 1 white football helmet.
Find 1 black pair of night vision goggles.
Snap the goggles onto the helmet. Again, look for small notches on the helmet and small bumps on the goggles that fit together.
The Rooky Partnur Minifigure is finished! Well done! Rooky is wearing blue pants, and a greyish-blue shirt. On top of that, she is wearing a bulletproof police vest with loads of pockets. Her police badge is pinned onto the right side of the vest. Rooky has a determined smile on her face - it seems like she is confident that she will catch Vito! If you want to put the helmet on, make sure to first take off the hairpiece.

Next, build the reconnaissance helicopter. Let's start with the landing gear.

Collect the following 2 pieces:
1 black plate 2x6,
and 1 dark stone grey brick 1x2 with cross hole.
Put the plate 2x6 horizontally on the table.
Put the brick 1x2 vertically on the rightmost column.
Find 1 lemon yellow curve tile 1x4x1⅓.
Put it horizontally to the left on the back row, slope to the back.
Collect the following 2 pieces:
1 dark stone grey brick 1x6 with inside arch,
and 1 medium stone grey palisade brick 1x2.
Put the brick 1x6 vertically on the front row on the second knob from the right. The brick is overhanging to the front.
Put the palisade brick 1x2 horizontally to the left.
Collect the following 2 pieces:
1 dark stone grey brick 1x6 with inside arch,
and 1 dark stone grey brick 1x2 with cross hole.
Put the brick 1x6 vertically to the left. Again, this brick is overhanging to the front.
Put the brick 1x2 vertically on the leftmost column.
Find 1 black plate 2x6.
Put it horizontally centered underneath the two bricks that are overhanging to the front. Mount them on the back row of the plate 2x6. The rightmost and leftmost columns of the plate 2x6 remain empty.
Collect the following 2 pieces:
1 medium stone grey palisade brick 1x2,
and 1 dark stone grey brick 1x2 with cross hole.
Put the palisade brick 1x2 horizontally in the middle of the second row from the front.
Put the brick 1x2 vertically on the rightmost column at the front.
Collect the following 2 pieces:
1 lemon yellow curve tile 1x4x1⅓,
and 1 dark stone grey brick 1x2 with cross hole.
Put the curve tile horizontally in the middle of the frontmost row, curve to the front.
Put the brick 1x2 vertically on the leftmost row at the front.
Find 1 lemon yellow plate 6x6.
Put it on top in the middle.
Collect the following 2 pieces:
1 bright red plate 2x4,
and 1 transparent blue plate 1x2.
Put the plate 2x4 horizontally in the middle of the previous piece.
Put the plate 1x2 vertically to the right of the previous piece.
Find 1 dark stone grey top angle plate 1x2 - 1x4 with 4 side knobs.
Put it vertically on the leftmost column in the middle, side knobs overhanging to the left.
Find 2 dark stone grey flat tiles 1x6.
Put 1 horizontally on the second row from the back.
Repeat symmetrically at the front.
Find 4 dark stone grey one-stepped curve tiles 1x2x⅔.
Put 2 vertically on the leftmost and rightmost column at the back, curve to the back.
Repeat symmetrically at the front.
Find 2 medium stone grey plates 1x2 with 1 knob.
Put them upright horizontally on the 4 side knobs on the left side, knobs to the left.
Find 1 dark stone grey telephone receiver.
Put it upright horizontally on the two previous pieces.

Next up, we build 4 landing buoys.

Let's start with the first two.
Find 2 lemon yellow round bricks 2x2 with top cross hole.
Put them on the table.
Find 2 lemon yellow domes 2x2 with 1 knob.
Put them on top of the round bricks 2x2.
Find 2 medium stone grey cross axles, 3 knobs long.
Insert them into the buoys from the bottom. Half of each cross axle will stick out.
To mount the buoys, insert the protruding cross axles into the two cross holes on the right side of the landing gear.
Now, let's make two more buoys.
Find 2 lemon yellow round bricks 2x2 with top cross hole.
Put them on the table.
Find 2 lemon yellow domes 2x2 with 1 knob.
Put them on top.
Find 2 medium stone grey cross axles, 3 knobs long.
Insert them into the buoys from the bottom. Half of each cross axle will stick out.
Mount those buoys by inserting the cross axles into the cross holes on the left side of the landing gear.
Very well done!
Find 1 dark stone grey inverted double roof tile 4x4, 45°.
Put it horizontally on the middle two rows on the right edge, but make sure that one column is overhanging to the left.
This is the first part of the helicopter bottom.

Now, we make another part of the helicopter bottom.

Find 1 dark stone grey inverted wedge piece 4x6.
Put it vertically on the table, narrow end to the back.
Find 1 medium stone grey plate 1x2 with 1 knob.
Put it horizontally on the backmost row of the lower part of the wedge piece.
Find 1 white plate 2x2.
Put it in front of the previous piece.
Now, mount this part horizontally on the middle two rows on the left side of the structure. Three columns of the narrow end are overhanging to the left.
We will continue to build on this helicopter bottom. This means that you can now ignore the knobs that are underneath the helicopter bottom.
Collect the following 3 pieces:
1 white roof tile 2x3, 25°,
1 transparent green round plate 1x1,
and 1 transparent red round plate 1x1.
Skip 2 columns from the right, and put the roof tile 2x3 horizontally on the middle two rows, slope to the left.
Put the transparent green round plate 1x1 on the backmost rightmost knob of the helicopter bottom.
Put the transparent red round plate 1x1 on the frontmost rightmost knob of the helicopter bottom.
Find 2 lemon yellow plates 1x6.
Put them horizontally to the left of the two previous pieces.
Find 1 lemon yellow trapezoid plate 3x4 with cut-out.
Put it on the tip of the helicopter bottom on the left, cut-out to the right. This piece fits the shape of the helicopter bottom.
Collect the following 2 pieces:
1 dark stone grey smooth roof tile 1x2x⅔,
and 1 medium stone grey and black joystick.
Put the roof tile 1x2x⅔ vertically on the second column from the left, slope to the right. It is printed with a dashboard with two gauges.
Put the joystick on the knob to the right.
Find 2 earth blue inverted roof tiles 1x2, 45°.
Put 1 horizontally on the rightmost knob of the front row, slope overhanging to the right.
Repeat symmetrically at the back.
Find 2 earth blue corner bricks 2x2.
Put 1 to the left of the previous piece, corner pointing to the back left.
Repeat symmetrically at the front, corner pointing to the front left.
Find 2 white inverted roof tiles 1x4x3, 60°.
Put them horizontally into the cavity on the right side on the two middle columns, slopes overhanging to the right.
Find 1 earth blue brick 1x1 with side knob.
Put it on the front row on the fifth knob from the right, side knob to the front.
Collect the following 2 pieces:
1 earth blue brick 1x1 with side knob,
and 1 black open-end wrench.
Insert the handle of the open end wrench into the side knob of the brick 1x1.
Put this small part on the back row on the fifth knob from the right, open-end wrench to the back.
Find 2 earth blue roof tiles 1x3, 25°.
Put 1 horizontally to the left of the previous piece, slope to the left.
Repeat symmetrically on the front row.
Find 2 earth blue bricks 1x2.
Skip 1 knob from the right, and put 1 horizontally on the front row.
Repeat symmetrically at the back.
Find 2 earth blue inverted roof tiles 1x2, 45°.
Put 1 horizontally to the right of the previous piece, slope overhanging to the right.
Repeat symmetrically at the front.
Collect the following 3 pieces:
1 medium stone grey palisade brick 1x2,
and 2 earth blue roof tiles 1x3, 25°.
Put the palisade brick 1x2 vertically on the fifth column from the right in the middle.
Put 1 roof tile 1x3 horizontally behind the previous piece, slope to the left.
Repeat symmetrically at the back.

Now, we build the tail of the helicopter.

Find 1 earth blue plate 2x16. It came loose in the box.
Put it horizontally on the table.
Collect the following 2 pieces:
1 black plate 1x2 with side pin connector,
and 1 transparent blue plate 1x2.
Put the plate 1x2 horizontally on the back row on the right edge.
Put the plate 1x2 with side pin connector horizontally in front of the previous piece, pin connector to the front.
Find 1 white plate 2x8.
Put it horizontally to the left.
Find 1 white rudder 2x6x4.
Put it horizontally on the rightmost four knobs, rudder overhanging to the right.
The white rudder is printed with the dark blue silhouette of a police badge that has a dark blue star in the middle.
Find 2 white flat tiles 1x6.
Put 1 horizontally to the left on the front row.
Put the other one horizontally behind the previous piece.
Find 2 black plates 1x2 with top tube.
Put 1 vertically on the back row on the sixth knob from the left, top tube overhanging to the back.
Repeat symmetrically at the front.
Find 1 black propeller with 3 blades.
Snap it onto the pin connector sticking out at the front right.
The tail of the helicopter is finished! Well done! Mount its leftmost 5 columns centered on the rightmost 5 columns of the helicopter base. The tail is overhanging to the right.
Find 1 earth blue bow tile 1x4x⅔.
Put it vertically on the leftmost column of the high part of the structure to lock in the helicopter tail.
Find 2 white plates 1x4.
Put 1 horizontally to the right of the previous piece on the back row.
Repeat symmetrically on the front row.
Find 2 black one-stepped plates 2x2x⅔ with 2 side knobs.
Put them on the 2 rightmost columns of the two previous pieces, side knobs to the front and back.
Find 2 black one-stepped plates 2x2x⅔ with 2 side knobs.
Put them to the left of the two previous pieces, side knobs again to the front and back.
Find 1 black plate 2x6.
Put it horizontally on top of the previous pieces. This piece fits neatly on the remaining knobs at the top.

Next up, we will build 2 side police signs. Let's start with one.

Find 1 transparent blue plate 1x2.
Put it horizontally on the table.
Find 1 earth blue bow tile 1x4x⅔.
Put it horizontally on top.
Continue if you want to decorate the piece with a sticker now. If not, skip the next three sentences.
Find 1 rectangular sticker number 1. Ask a sighted person to help you find the sticker.
Put it horizontally on top.
The sticker is dark blue and has the word "POLICE" written on it in all caps in a cool design: the top of the letters is lemon yellow, there is a dark blue horizontal line running through the middle of each letter, and the bottom half of the letters is white.
Find 1 transparent blue plate 1x2.
Put it horizontally on the table.
Find 1 earth blue bow tile 1x4x⅔.
Put it horizontally on top.
Continue if you want to decorate the piece with a sticker now. If not, skip the next three sentences.
Find 1 rectangular sticker number 1. Ask a sighted person to help you.
Put it horizontally on top.
It has the same design as the previous sticker.
The second side police sign is finished, too! Awesome! Mount it upright horizontally on the four side knobs at the back of the helicopter.
Find 1 white trapezoid plate 2x4.
Put it vertically on the left edge of the highest part of the helicopter, narrow end to the left.
Find 1 black plate 1x2 with 2 vertical clasps on long side.
Put it vertically on the left column of the previous piece, clasps to the left.
Find 1 black curve bar piece 2x4x1⅓ with 2 plates 1x2.
Put it horizontally on top of the previous piece, higher plate to the left, lower plate to the right.
Find 2 white roof tiles with lattice 1x2x⅔.
Put them horizontally on the rightmost four knobs, slopes to the right.
Collect the following 2 pieces:
1 black roof tile 2x3, 25°,
and 1 transparent blue plate 1x2.
Put the plate 1x2 vertically on the leftmost column of the high part of the structure.
Put the roof tile 2x3 horizontally to the right, slope to the right.
Find 1 black plate 2x2 with top connector.
Put it on top in the middle.

Next, we will make the 2 top rotor blades.

Find 1 dark stone grey technic beam 1x1 with 2 cross axles.
Put it on the table so that the hole is running from top to bottom, and the cross axles are pointing to the front and back. The orientation will be very important later.
Find 2 black hinge stub 1x1 with cross hole.
Put the cross holes of the hinges stub on the two cross axle ends.
The slightly flat hinge stumps must be oriented upright. This means that their flatter sides should be on the left and right, not at the top and bottom.
Find 2 black flaps 2x8 with hinge fork.
Snap the hinge forks on the hinge stubs. Make sure the knobs of the flaps are facing up.
Continue if you want to decorate the flaps with stickers now. If not, skip the next three sentences.
Find 2 small rectangular stickers number 2. Ask a sighted person to help you.
Put them on the outer ends of the flaps.
The stickers are signal yellow with a black vertical stripe in the middle.
The 2 top rotor blades are finished! Great job! Put the hole of the technic beam with cross axles on the connector at the top of the helicopter. If you give the rotor a gentle push, the rotor blades will spin!
Find 1 medium stone grey pair of handcuffs.
Snap it into the clasp on the back side of the structure.

Next, we build the helicopter exterior camera.

Find 1 black camera piece with handle and side sight.
Collect the following 2 pieces:
1 transparent round plate 1x1,
and 1 transparent red round plate 1x1.
Put the transparent round plate 1x1 on the front lens of the camera piece.
Put the transparent red round plate 1x1 on the side sight of the camera piece.
The helicopter exterior camera is finished! Great job! Insert the handle of the camera piece into the hollow knob on the front side of the helicopter. Let the lights point to the right.

Next, we will build the searchlight.

Find 1 transparent yellow curved disk 2x2.
Put it on the table, knobs to the top.
Find 1 dark stone grey round plate 2x2 with 1 knob.
Put it on top.
Find 1 medium stone grey plate 1x1 with top clasp.
Put it on top.
The searchlight is finished! Well done! Snap its clasp onto the telephone receiver piece on the left bottom of the structure.
Find 1 transparent light blue cockpit 8x4x2 with shaft.
Snap the shaft of the cockpit into the clasp at the top of the helicopter, to the left of the top rotor. You can fold it up and down to let Rooky Partnur get on and off the helicopter.
The reconnaissance helicopter is finished. Great job!

You have finished building the whole set! Very well done! Now it's time to cut to the chase: can Vito the Crook escape on his makeshift raft and hide his loot, or will Rooky Partnur catch him in time? In any case, watch out for snappy sharks!


Enjoy!