LEGO 76425 Hedwig at 4 Privet Drive 

LEGO Audio & Braille Building Instructions for the LEGO Harry Potter set "Hedwig at 4 Privet Drive".

Build, display and play with your own enchanting model of snowy owl Hedwig! Recreate the look of Harry's pet in LEGO style and adjust her head, wings and tail for cute poses. Perch Hedwig on the road sign for Privet Drive, where Harry Potter lived with the Dursleys. And what's inside Harry's trunk? A portrait of Harry and his parents, an "A History of Magic" book and a wand!

The box cover shows Hedwig with all her lovely details. The magical owl is snowy white with some light grey features, like the pattern of her chest feathers or the bottom side of her flight feathers. She has big round eyes with bright yellow irises and big, pitch black pupils. Hedwig is sitting on the Privet Drive street sign, but it looks like she is about to take off: she is spreading her beautiful wings! The street sign is standing on a neat patch of grass with small yellow flowers. In the background, harry's trunk is standing on the street. Its lid is slightly opened, and its contents are lined up in front of it: these are Harry's most valued possessions: a photograph of his parents holding him as a baby, a copy of the book "A History of Magic ", and his powerful wand with wand case. By the way: this street we are talking about is unmistakably Privet Drive because the house that is depicted in the background is the Dursleys' home. The yellow brick house with the three barred windows used to be Harry's home, too. In the bottom right corner are portraits of the movie characters of Harry, Hermione, and Ron. They are wearing their Hogwarts school uniforms in Gryffindor colors, and harry is casting a spell with his wand which sends a lightning bolt across the top of the box cover, cutting off the scene in 4 Privet drive. But now, let's start building!

Open the box. This can be tricky; ask someone to help you!

The box contains 1 booklet with visual building instructions, 6 bags with numbers printed on them, and 1 sheet with 6 stickers. Ask a sighted person to help you find the correct bag!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the bottom half of Harry's trunk.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we will build Harry's trunk.

Collect the following 2 pieces:

1 reddish brown plate 2x2 with 2 knobs,

and 1 reddish brown plate 1x6.

Put the plate 1x6 vertically on the table.

Turn the plate 2x2 so that its two knobs form a column on the right edge.

Put it on the second and third knob from the back, smooth half overhanging to the left.

Find another reddish brown plate 2x2 with 2 knobs.

Put it in front of the previous piece, smooth half overhanging to the left.

Find 1 reddish brown plate 4x6 with 12 knobs on 3 edges.

Turn it vertically so that the edge without knobs is on the left.

Mount its right edge underneath the 2 previous pieces, making sure that the front and back edges are flush with the front and back of the plate 1x6.

Find 2 reddish brown bricks 1x3.

Put 1 horizontally on the backmost row, starting from the right edge.

Repeat symmetrically at the front.

Find 2 reddish brown bricks 1x4.

Put 1 horizontally to the left of the previous piece, 2 knobs overhanging to the left.

Repeat symmetrically at the back.

Find 1 reddish brown plate 4x6 with 12 knobs on 3 edges.

Turn it vertically so that the edge without knobs is on the right.

Mount this piece underneath the 2 previous pieces.

Find 2 reddish brown bricks 1x3.

Put 1 horizontally on the 2 leftmost knobs of the backmost row, 1 knob overhanging to the left.

Repeat symmetrically at the front.

Find 1 reddish brown plate 1x6.

Put it vertically underneath the overhanging knobs of the 2 previous pieces.

Find 2 reddish brown plates 2x2 with 2 knobs.

Turn 1 so that its knobs form a column on the left edge.

Mount it on the leftmost edge on the lower part of the trunk bottom, making sure its back edge touches the brick on the backmost row.

Put the other one in front of the previous piece, 2 knobs on the left.

Now, let's make 2 sub-parts of the trunk bottom.

Collect the following 4 pieces:

2 reddish brown plates 1x4,

and 2 reddish brown plates 1x2.

Put 1 plate 1x4 vertically on the table.

Put 1 plate 1x2 vertically on the 2 middle knobs.

Repeat with the other two pieces to create an identical sub-part.

Find 4 dark stone grey bottom angle plates 1x1 - 1x1 with 1 side knob.

Put 1 behind the previous piece, side knob to the left.

Put 1 on the frontmost knob of the same sub-part, side knob again to the left.

Repeat with the other two angle plates on the other sub-part.

The 2 sub-parts of the trunk bottom are finished! Well done! Mount 1 vertically centered on the leftmost column, both side knobs pointing to the left.

Repeat symmetrically on the right, side knobs to the right.

Next, we will make another sub-part of the trunk bottom.

Find 2 reddish brown plates 1x6.

Stack them on top of each other and put them horizontally on the table.

Find 3 reddish brown half-cylinder pieces 1x2x⅔.

Put them horizontally next to each other on the stack of plates, covering all knobs.

Mount this sub-part horizontally centered on the backmost row. If done correctly, there are 2 empty knobs on its left side and 2 empty knobs on its right side.

Find 2 reddish brown plates 1x1.

Put 1 to the right of the sub-part we have just mounted and the other one to its left.

Find 2 reddish brown plates 1x2.

Put 1 vertically on the leftmost column, starting from the back.

Repeat symmetrically on the right.

Find 2 reddish brown bricks 1x4.

Put 1 vertically in front of the previous piece.

Repeat symmetrically on the left.

Collect the following 3 pieces:

1 reddish brown brick 1x2 with side knob,

and 2 reddish brown bricks 1x3.

Put 1 brick 1x3 horizontally on the frontmost row directly to the right of the previous piece.

Put the brick 1x2 with side knob horizontally to the right of the previous piece, side knob to the front.

Put the other brick 1x3 horizontally to the right of the previous piece.

Collect the following 3 pieces:

2 mud grey corner tiles 1x2 - 1x2,

and 1 mud grey flat tile 1x6.

Put 1 corner tile 1x2 on the front left corner of the trunk bottom, making sure that its shape perfectly matches the corner.

Put the flat tile 1x6 horizontally on the frontmost row, directly to the right of the previous piece.

Put the other corner tile 1x2 on the front right corner of the trunk bottom, again aligning the shapes of the corner tile and the trunk bottom corner.

Find 2 reddish brown curve tiles 1x4.

Put 1 upright horizontally on the 2 side knobs on the right side surface.

Repeat symmetrically on the left. These are the trunk handles.

Collect the following 2 pieces:

1 medium stone grey flat tile 1x1, (this piece is printed)

and 1 medium stone grey rounded plate 1x2.

Flip the rounded plate 1x2 upright so that its knobs are pointing towards you and turn it vertically.

Mount its lower half on the side knob pointing to the front, one half protruding to the top.

Put the flat tile upright on the lower knob of the previous piece.

The flat tile is printed with a black key lock and four black rivets in its corners.

The trunk bottom is finished! Well done!

Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the trunk lid, the "A History of Magic" book, the family photograph, and Harry's wand with case.

Next, we will build the trunk lid.

Collect the following 2 pieces:

1 reddish brown plate 6x10,

and 1 reddish brown plate 1x4.

Put the plate 6x10 horizontally on the table.

Put the plate 1x4 vertically centered on the rightmost column.

Find another reddish brown plate 1x4.

Put it vertically centered on the leftmost column.

Find 2 reddish brown plates 1x2.

Put 1 vertically centered on the previous piece. This means it sits in the middle of the leftmost column.

Repeat symmetrically on the right.

Find 2 mud grey plates 1x2.

Put 1 horizontally centered on the second row from the front.

Put the other one horizontally centered on the second row from the back.

Find 2 reddish brown plates 1x10.

Put 1 horizontally centered on top of the previous piece. If done correctly, its leftmost and rightmost knobs will connect to the back knobs of the vertically mounted plates 1x3 on the left and right edge.

This also means that 6 knobs of this piece won't connect to anything at the bottom, creating two small gaps. This is as intended.

Repeat symmetrically on the second row from the front.

Collect the following 3 pieces:

2 mud grey curve bricks 1x1 with protruding plate 1x1,

and 1 mud grey plate 1x2.

Put 1 curve brick with protruding plate vertically on the frontmost knob of the rightmost column, protruding plate pointing to the back. This means the curve is at the front edge.

Put the plate 1x2 vertically behind the previous piece on the rightmost column.

Put the other curve brick with protruding plate vertically behind the previous piece, protruding plate to the front.

Collect the following 3 pieces:

2 reddish brown curve pieces 1x2x1,

and 1 reddish brown flat tile 2x4.

Put 1 curve piece 1x2 horizontally to the left of the previous piece on the backmost row, curve to the back.

Put the flat tile 2x4 vertically in front of the previous piece.

Put the other curve piece horizontally in front of the previous piece, curve to the front.

Find 2 mud grey curve bricks 1x1 with protruding plate 1x1.

Put 1 vertically to the left of the previous piece, protruding plate to the back.

Repeat symmetrically at the back, protruding plate to the front.

Collect the following 4 pieces:

2 mud grey curve bricks 1x1 with protruding plate 1x1,

and 2 reddish brown curve pieces 1x2x1.

Put 1 curve piece 1x2 horizontally to the left of the previous piece, curve to the back.

Put 1 curve brick with protruding plate to the left of the previous piece, protruding plate pointing to the front. This means the curves are at the back.

Repeat symmetrically at the front, curves to the front.

Find 2 dark stone grey bricks 1x2.

Put 1 vertically between the 2 leftmost curve bricks with protruding plates.

Put the other one vertically between the 2 middle curve bricks with protruding plates.

Collect the following 3 pieces:

1 reddish brown flat tile 2x4,

and 2 reddish brown curve pieces 1x2x1.

Put 1 curve piece 1x2 horizontally on the backmost row directly to the leftmost curve brick 1x1, curve to the back.

Put the flat tile 2x4 vertically in front of the previous piece.

Put the other curve piece 1x2 horizontally in front of the previous piece, curve to the front.

Collect the following 3 pieces:

2 mud grey curve bricks 1x1 with protruding plate 1x1,

and 1 mud grey plate 1x2.

Put 1 curve brick with protruding plate on the backmost knob of the leftmost column, protruding plate to the front.

Put the plate 1x2 vertically in front of the previous piece.

Put the other curve brick with protruding plate vertically in front of the previous piece, protruding plate to the back.

Find 4 mud grey flat tiles 1x4.

Put 1 vertically centered on the leftmost column. This means it will be mounted on the 3 previous pieces.

Repeat symmetrically on the rightmost column.

Put the 2 remaining flat tiles vertically between the 4 remaining curve bricks 1x1 with protruding plates. If done correctly, there will be 2 empty columns of knobs left in the center of the trunk lid.

Collect the following 4 pieces:

2 reddish brown plates 1x1,

and 2 dark stone grey plates 1x2 with side bottom tube.

Flip the trunk lid upside down, but make sure to keep the horizontal orientation.

Flip 1 plate with tube upside down and turn it vertically, making sure that the tube half is at the front.

Mount it on the front edge on the second column from the left.

Put 1 plate 1x1 to the right of the previous piece's back half. This means it will sit on the second row from the front.

Repeat symmetrically on the right: put the other plate with tube vertically on the second column from the right, starting from the front, tube to the front. Then put the other plate 1x1 to the right of the previous piece's back half.

Find 2 dark stone grey inverted one-stepped curve tiles 2x2x⅔.

Flip 1 upside down so that its knobs are pointing to the bottom. Make sure the higher part is at the front edge.

Mount its front half on the 2 previous pieces and its back half on the row behind them. The curve should be running towards the back.

Repeat symmetrically on the left.

Find 2 black connector pegs 2m with middle ring. (2m means that this piece is about 2 knobs long.)

Insert 1 from the right into the tube on the right side of the trunk lid, one half sticking out towards the right.

Repeat symmetrically on the left.

Next, we will make the trunk lid hinges.

Collect the following 4 pieces:

2 reddish brown plates 1x2 with top tube,

and 2 reddish brown plates 1x1.

Put 1 plate 1x2 with tube vertically on the table, tube to the back.

Put 1 plate 1x1 on the previous piece's knob.

Repeat with the two remaining pieces.

Now, flip one hinge upright vertically so that the tube and knob are pointing to the back, tube in the bottom half.

Slide its tube from the right onto the connector half sticking out towards the right, 1/2 protruding to the top, knob pointing to the back.

Repeat symmetrically on the left with the second hinge.

The trunk lid is finished! Well done! Flip it right side up again, keeping the horizontal orientation but making sure that the hinges are at the back edge now.

Mount the 2 of the hinges on the rightmost and leftmost columns of the trunk bottom, starting from the back edge.

You should be able to fold the trunk lid up and down now. Leave it open for now so that we can finish building it.

Find 2 mud grey flat tiles 1x3.

Put 1 vertically on the remaining knobs of the rightmost column.

Repeat symmetrically on the left.

Collect the following 2 pieces:

1 reddish brown flat tile 2x4,

and 1 rectangular sticker 2x4 (sticker number 6). (If you do not want to apply the sticker now, skip the following 3 sentences. Otherwise ask a sighted person to help you identify the correct sticker.)

Put the flat tile 2x4 vertically on the table.

Put the sticker centered on top, matching the shape of the flat tile.

The sticker is printed with a mud brown version of the Hogwarts coat of arms. It features a black letter "H" in its center, and its background is divided into 4 quarters. Each quarter houses an animal representing one of the four houses at Hogwarts. They are based on the traits that the four founders of Hogwarts valued the most: there is a lion in the top left quarter for Gryffindor, a snake in the top right corner for Slytherin, a badger in the bottom left quarter for Hufflepuff, and a raven in the bottom right quarter for Ravenclaw.

Mount the flat tile vertically in the center of the trunk lid. The top of the coat of arms with has a small tip in the middle should point towards the front. If you are not sure about print orientation, you can ask a sighted person for help if you want that.

Next up, we will assemble the "A History of Magic" book.

Collect the following 2 pieces:

1 pale ocher yellow brick 1x4x3,

and 1 sticker 3x4. (If you do not want to apply the sticker now, skip the following 3 sentences. Otherwise ask a sighted person to help you with finding the sticker.)

Put the brick 1x4x3 vertically flat on the table, knobs pointing to the left.

Put the sticker on the top surface, matching the shape of the brick.

This sticker is printed with the book cover of "A History of Magic". The base color is beige, the embellishments are golden and the title is printed in black small caps in the middle of the book cover, one word per line. There is a fine double line on the outer edges that turn into two snake heads turning towards each other in the four book corners. In the center of the cover, surrounding the title, is a double lined diamond shape. The areas outside of that diamond are embellished with tiny stars.

Find 1 pale ocher yellow flat tile 1x4.

Put it on the 4 knobs of the brick.

The "A History of Magic" book is finished! Well done! Put it into the trunk.

Collect the following 2 pieces:

1 mud grey flat tile 2x3,

and 1 sticker 2x3. (If you do not want to apply the sticker now, skip the following 3 sentences. Otherwise ask a sighted person to help you with finding the sticker.)

Put the sticker centered on top of the flat tile, matching their shapes.

The sticker shows a photograph in sepia (sepia means that all colors are represented in reddish brown hues). It shows James and lily Potter holding swaddled baby Harry in their arms. The family looks happy.

Put the family photograph into the trunk.

Next up, we will build the wand case.

Collect the following 2 pieces:

1 pale ocher yellow panel element 1x3x1,

and 1 pale ocher yellow plate 1x8.

Put the plate 1x8 horizontally on the table.

Put the panel element horizontally on the second, third and fourth knob from the right, panel to the back.

Find another pale ocher yellow panel element 1x3x1.

Put it horizontally to the left of the previous piece, panel to the back.

If done correctly, the rightmost and leftmost knobs are still empty, and both panels are towards the back.

Find 2 pale ocher yellow bricks 1x1 with side knob.

Put 1 to the left of the previous piece, side knob to the front.

Repeat symmetrically on the right.

Find 1 pale ocher yellow flat tile 1x8.

Put it horizontally on top of the 2 previous pieces.

Next, we will assemble Harry's wand.

Collect the following 2 pieces:

1 dark brown narrow tube 2m with short shaft,

and 1 reddish brown shaft 4m.

Insert the shaft 4m into the hole of the tube.

Harry's wand is finished! Well done! Put the wand case flat on the table, 2 side knobs pointing to the top. Put the wand into the wand case.

Find 1 dark orange flat tile 1x8.

Put it horizontally on top, closing the wand case.

The wand case is finished! Great job! Put it into the trunk and close the lid if you like.

Harry's trunk is finished! Well done! Now that Harry's most precious possessions are safely stowed, we can continue building the road sign.

Open bag number 3. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Privet Drive street sign with green patch.

We will start with the green patch.

Collect the following 2 pieces:

1 dark green plate 1x6,

and 1 dark green inverted roof tile 1x3, 25°.

Put the plate 1x6 horizontally on the table.

Put the inverted roof tile 1x3 horizontally on the leftmost knob of the previous piece, slope overhanging to the left.

Collect the following 3 pieces:

1 reddish brown brick 1x1 with side knob,

1 dark green inverted roof tile 1x3, 25°,

and 1 dark green brick 1x3.

Put the brick 1x3 horizontally to the right of the previous piece.

Put the brick 1x1 to the right of the previous piece, side knob to the front.

Put the inverted roof tile 1x3 horizontally to the right of the previous piece, slope overhanging to the right.

Find 1 dark green plate 1x10.

Put it horizontally on top, covering the entire top row.

Collect the following 3 pieces:

1 dark green brick 1x4,

1 dark green brick 1x1,

and 1 reddish brown brick 1x1 with side knob.

Skip the 2 rightmost knobs, and put the brick 1x4 horizontally on top.

Put the brick 1x1 with side knob to the left of the previous piece, side knob to the front.

Put the brick 1x1 to the left of the previous piece.

Next, we will build the street sign.

Collect the following 2 pieces:

1 black plate 2x8,

and 1 black plate 2x6.

Put the plate 2x8 horizontally on the table.

Put the plate 2x6 horizontally centered on top.

Find 1 black plate 2x2.

Put it centered on top of the previous piece. This means it will sit on the 4 middle knobs of the street sign structure.

Collect the following 4 pieces:

2 black plates 1x2,

and 2 black plates 1x2 with vertical clasp on long side.

Put 1 plate 1x2 horizontally to the right of the previous piece's back half.

Put 1 plate 1x2 with clasp horizontally in front of the previous piece, clasp to the front.

Repeat symmetrically on the left.

Next, we will build 2 road sign pillars.

Collect the following 4 pieces:

2 black plates 1x8,

and 2 medium stone grey round plates 1x1.

Put 1 plate 1x8 horizontally on the table.

Put 1 round plate 1x1 on the rightmost knob.

Repeat with the 2 remaining pieces.

Collect the following 4 pieces:

2 medium stone grey round plates 1x1,

and 2 black half-cylinder pieces 1x4x⅔.

Put 1 round plate 1x1 on top of one of the 2 round plates 1x1 of the previous step.

Put 1 half-cylinder piece 1x4 horizontally to the left of the previous piece.

Repeat with the 2 remaining pieces on the second road sign pillar.

If done correctly, the 3 leftmost knobs of each pillar remain empty for now.

Before mounting the pillar, make sure that the street sign structure is oriented horizontally, clasps to the front.

Turn 1 pillar vertically, 3 empty knobs to the front, and mount it on the rightmost column of the street sign structure, 1 knob overhanging to the front, half-cylinder piece and round plate stack overhanging to the back.

Repeat symmetrically on the left.

Find 2 black plates 2x2.

Put 1 in front of the half-cylinder piece on the left edge, 1 column overhanging to the left.

Repeat symmetrically on the right, 1 column overhanging to the right. The 2 frontmost knobs of the road sign pillars remain empty for now.

Collect the following 2 pieces:

1 white flat tile 2x6,

and 1 sticker 2x6 (sticker number 1). (If you do not want to apply the sticker now, skip the following 3 sentences. Otherwise ask a sighted person to help you with finding the sticker.)

Put the sticker on top of the flat tile, matching their shapes.

This white sticker is printed with the word "PRIVET" in black, all caps letters. There are 6 tiny black rivets printed on it, 3 on each long edge.

Mount this piece horizontally on the topmost knobs of the street sign, starting from the right edge. To ensure the correct orientation of the writing, ask a sighted person for help.

Collect the following 2 pieces:

1 white flat tile 2x4,

and 1 rectangular sticker 2x4 (sticker number 3). (If you do not want to apply the sticker now, skip the following 3 sentences. Otherwise ask a sighted person to help you with finding the sticker.)

Put the sticker on top of the flat tile, aligning their shapes.

This white sticker is printed with the word "DRIVE" in all caps, and there are 4 black rivets in total.

Mount it horizontally to the left of the previous piece. For the correct orientation of the letters, you might want to ask a sighted person for help again.

Find 2 black half cylinders 1x1.

Put 1 on the left knob protruding to the front, curve running from left to right.

Put the other one on the right knob protruding to the front, curve running from left to right.

The street sign is finished! Well done! Leave it flat on the table and fetch the green patch we have built before. Make sure that the green patch is still upright (this means that its main knobs are pointing to the top). It should be oriented horizontally so that the 2 asymmetrically placed side knobs are pointing towards you.

We will have a weird building orientation for a few steps now. Pick up the street sign but make sure to keep it flat (do not flip it upright yet!). This means that its two pillars are pointing to the back. Mount the 2 backmost knobs on the 2 pillar ends on the knobs of the green patch that are currently pointing to the top. This means the sign will float in the air towards the front (or tilt down towards the front when released). This is correct! The pillar ends will enclose the highest row of knobs while there is 1 empty knob on the outer side of each pillar.

This build is a bit awkward now, the street sign will likely make the whole build tilt towards the front. This is ok for now.

Find 2 dark green bricks 1x1.

Put 1 on the rightmost knob to the right of the pillar end.

Repeat symmetrically on the left.

Collect the following 3 pieces:

1 dark green brick 1x6,

and 2 dark green roof tiles 1x2, 45°.

Put the brick 1x6 horizontally centered on top of the green patch.

Put 1 roof tile 1x2 horizontally to the left of the previous piece, slope to the left.

Repeat symmetrically on the right, slope to the right.

Collect the following 4 pieces:

1 reddish brown brick 1x1 with side knob,

1 dark green brick 1x2,

1 dark green brick 1x3,

and 1 dark green roof tile 1x2, 45°.

Put the brick 1x3 horizontally on the top row, starting from the right edge.

Put the brick 1x1 with side knob to the left of the previous piece, side knob to the front.

Put the brick 1x2 horizontally to the left of the previous piece.

Put the roof tile 1x2 horizontally to the left of the previous piece, slope to the left.

Now, we make a sub-part of the green patch.

Collect the following 2 pieces:

1 dark green plate 1x3,

and 1 dark green one-stepped curve tile 1x3.

Put the plate 1x3 horizontally on the table.

Put the one-stepped curve tile 1x3 horizontally on the leftmost knob, curve to the left, 2/3 overhanging to the left.

Find 1 dark green plate 1x1.

Put it to the right of the previous piece.

Collect the following 2 pieces:

1 dark green one-stepped curve tile 1x3,

and 1 dark green flat tile 1x1.

Put the flat tile 1x1 on the previous piece.

Put the one-stepped curve tile 1x3 horizontally to the right of the previous piece, curve to the right, 2/3 overhanging to the right.

The sub-part of the green patch is finished! Well done! Mount it horizontally on top of the green patch to that all knobs are covered.

Find 3 flame yellowish orange decoration flowers with small shaft.

First, flip the street sign with green patch upright so that the Privet Drive sign is towards you and the green patch is at the bottom.

Insert the small shafts of the decoration flowers into the 3 hollow knobs on the green patch.

The Privet Drive street sign with green patch is finished! Great job! Can you already guess what the 2 clasps at the top of the street sign can be used for later?

Open bag number 4. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for Hedwig's torso.

Collect the following 2 pieces:

1 white plate 1x6,

and 1 white plate 1x2 with handle on long side.

Put the plate 1x6 vertically on the table.

Put the plate with handle vertically on the 2 backmost knobs, handle to the right.

Collect the following 2 pieces:

1 white plate 2x2,

and 1 white plate 1x2 with handle on long side.

Put the plate 2x2 in front of the previous piece, 1 column overhanging to the left.

Put the plate with handle vertically in front of the previous piece, handle to the right.

Find 1 white plate 4x4.

Put the plate's rightmost column centered underneath the 2 knobs overhanging to the left, 3 columns protruding to the left.

Collect the following 4 pieces:

2 dark stone grey plates 1x3,

and 2 dark stone grey plates 1x2 with ball on long side.

Put 1 plate 1x3 horizontally on the previous piece's back row, starting from its right edge.

Repeat symmetrically at the front.

Put 1 plate with ball horizontally to the left of the previous piece, 1 knob overhanging to the left, ball pointing to the front.

Repeat symmetrically at the back, ball to the back.

Collect the following 4 pieces:

2 medium stone grey plates 2x3,

and 2 dark stone grey plates 1x3.

Put 1 plate 1x3 horizontally on top of the previous piece and the knob to its right.

Put 1 plate 2x3 horizontally to the right of the previous piece, aligning their back edges.

Put the other plate 2x3 horizontally in front of the previous piece.

Put the other plate 1x3 horizontally to the left of the previous piece's front row.

Find 2 white one-stepped curve tiles 1x2.

Put 1 vertically on the rightmost column, starting from the back edge, curve to the back.

Repeat symmetrically at the front, curve to the front.

Collect the following 3 pieces:

1 white plate 1x4,

and 2 medium stone grey plates 1x2.

Put 1 plate 1x2 vertically between the 2 previous pieces on the rightmost column.

Put the plate 1x4 vertically to the left of the 3 previous pieces.

Put the other plate 1x2 vertically centered to the left of the previous piece.

Find 1 white brick 2x2 with ball cup.

Put it horizontally to the left of the previous piece, ball cup to the left.

Find 2 white plates 1x4.

Put 1 horizontally behind the previous piece, starting from the left edge.

Repeat symmetrically at the front.

Find 2 white corner plates 1x2 - 1x2.

Flip the torso structure upside down so that the knobs are touching the table. Make sure the ball cup is still pointing to the left.

Flip 1 corner plate upside down and turn it so that the center corner is pointing to the back right.

Mount it on the rightmost column and the frontmost row. Its inner corner will match the shape of the structure.

Repeat symmetrically at the back with the other corner plate.

Collect the following 3 pieces:

2 medium stone grey one-stepped inverted curve tiles 1x2,

and 1 white plate 2x4.

Put the plate 2x4 horizontally on the 2 middle rows directly to the right of the ball cup.

Put 1 one-stepped inverted curve tile 1x2 horizontally behind the previous piece, starting from the left edge, curve to the left.

Repeat symmetrically at the front.

Collect the following 3 pieces:

1 white plate 2x2,

and 2 medium stone grey plates 1x2 with hinge fork on short end.

Put the plate 2x2 directly to the right of the ball cup. This means it will sit on the left half of the plate 2x4 from the previous step.

Put 1 plate 1x2 horizontally to the right of the previous piece's back half, hinge fork to the right.

Put the other plate 1x2 horizontally in front of the previous piece, hinge fork to the right.

Find 1 white inverted double roof tile 2x4, 45°.

Put it vertically on top of the 3 previous pieces to connect them, slopes to the front and back.

Find 2 medium stone grey one-stepped inverted curve tiles 1x2.

Put 1 vertically to the left of the previous piece, starting from the back edge, curve to the back.

Repeat symmetrically at the front, curve to the front.

Collect the following 3 pieces:

1 white roof tile 2x4, 18°,

and 2 white smooth roof tiles 1x2x⅔.

First, flip the torso structure right side up again. Make sure the big ball cup is still pointing to the left.

Put the roof tile 2x4 horizontally centered on the 2 rightmost columns, slope to the right, 1/2 overhanging to the right.

Put 1 smooth roof tile 1x2 horizontally in front of the previous piece's left half, slope to the front.

Repeat symmetrically at the back, slope to the back.

If done correctly, the left edges of these 3 pieces should be aligned, with only the large roof tile 2x4 protruding to the right.

Find 2 white roof tiles 2x2, 45°.

Put 1 to the left of the previous piece on the 2 back rows, slope to the back.

Put the other one in front of the previous piece, slope to the front.

Find 2 white plates 1x1.

Put 1 on the single knob to the left of the previous piece.

Repeat symmetrically at the back.

Find 2 white smooth roof tiles 1x1.

Put 1 on top of the previous piece, slope to the back.

Repeat symmetrically at the front, slope to the front.

Find 1 white plate 2x2.

Put it on top of the torso structure directly to the right of the ball cup.

Find 1 white plate 1x2 with ragged side rock.

Put it on the previous piece's right half, ragged rock to the right.

Now, we will build Hedwig's chest.

Collect the following 2 pieces:

1 white one-stepped curve tile 2x2,

and 1 medium stone grey plate 1x2.

Put the plate 1x2 vertically on the table.

Put the lower edge of the curve tile on top, higher half overhanging to the right.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 2 sentences.

Find 1 square sticker 2x2 (sticker number 2). Ask a sighted person to help you find the correct sticker.

Put the sticker on top of the curve tile. It is printed with light grey chest feathers which are rather small and have rounded tips. The rounded tips are towards the right, ask a sighted person for help if you like.

Mount this piece on the leftmost column of knobs, curve towards the left, left half hovering above the ball cup.

Next up, we will assemble Hedwig's feet.

Collect the following 4 pieces:

2 white rounded plates 1x2,

and 2 white plates 1x2 with 2 vertical clasps on long side.

Flip 1 plate with clasps upside down and put it horizontally on the table, clasps to the front.

Put 1 rounded plate upside down on the previous piece.

Repeat with the 2 remaining pieces.

Find 4 mud grey small horns with short shaft.

Insert the shaft of 1 horn into the left half of one rounded plate, horn pointing towards you.

Insert the shaft of another horn into the right half of that same rounded plate, horn again pointing towards you.

Repeat with the 2 remaining horns on the other foot structure.

These horns are Hedwig's talons!

Hedwig's feet are finished! Well done! Flip 1 upside down so that the talons are pointing to the bottom and the knobs are pointing to the top. Snap its clasps on one of the handles pointing to the right.

Repeat with the second foot on the other handle.

Now, fold the feet up so that the knobs are pointing to the left and the talons are towards the right. If done correctly, the tips of the talons will all be pointing downwards.

With this, Hedwig's torso is finished! Great job! Let's continue with the next part: her tail feathers.

Open bag number 5. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for Hedwig's tail feathers, her right wing and her left wing.

We will continue with the tail feathers.

Collect the following 3 pieces:

1 white plate 1x4,

and 2 white plates 1x2 with hinge stub on short side.

Put the plate 1x4 horizontally on the table.

Put 1 plate 1x2 vertically on the second knob from the left, hinge stub pointing to the back, 1 knob overhanging to the front.

Put the other one vertically to the right of the previous piece, hinge stub to the back, 1 knob overhanging to the front.

Find 1 white trapezoid plate 2x4.

Turn it so that its longest edge is at the front.

Mount its back row underneath the front knobs of the 2 previous pieces, 1 row protruding to the front.

Next, we will build the 2 outer feathers.

Collect the following 4 pieces:

2 medium stone grey plates 1x2,

and 2 medium stone grey rounded plates 1x3.

Put 1 plate 1x2 horizontally on the table.

Put 1 rounded plate 1x3 horizontally on the right knob, 2 knobs overhanging to the right.

Repeat with the 2 remaining pieces.

Find 2 white one-stepped curve tiles 1x2.

Put 1 horizontally on the 2 leftmost knobs of one feather, curve to the left.

Repeat on the other feather structure.

The feathers will both be mounted at an angle parallel to the slanted sides of the trapezoid plate.

Turn 1 feather vertically, slope to the front, and mount its backmost knob on the rightmost knob of the back row, feather pointing to the front left. It will only connect with one knob.

Repeat symmetrically on the leftmost knob with the other feather.

Make sure the inner edges of the feathers are touching the tips of the trapezoid plate.

Find 1 white flat tile 1x4.

Put it horizontally centered on the backmost row. This will lock in the backmost knobs of the 2 outer feathers.

Find 2 black quarter-circle tiles 1x1.

Put 1 on the empty knob of the left feather, quarter circle to the back left.

Repeat symmetrically on the right, quarter circle to the back right.

Find 2 white two-stepped curve tiles 1x4.

Put 1 vertically on the left column of the remaining knobs, curve to the front, 1/2 overhanging to the front.

Put the other one vertically to the right of the previous piece, curve to the front, 1/2 overhanging to the front.

The tail feathers are finished! Great job! To mount them, flip Hedwig's torso upright, making sure that the ball cup is pointing to the top and the smooth chest surface is pointing to the right.

While keeping the tail feathers flat, snap the 2 clasps of the tail feathers on the handle at the bottom of the torso, tail feathers protruding towards the left.

You can now try to carefully seat the torso with tail feathers on the table. It should rest on the talons and tail feathers. Adjust those pieces slightly if necessary.

Now, we will build Hedwig's left wing.

Collect the following 2 pieces:

1 white quarter-circle plate 3x3,

and 1 medium stone grey plate 1x2 with ball cup on long side.

Put the quarter-circle plate 3x3 on the table, right angle pointing to the front right. Make sure the knobs form straight rows and columns in front of you.

Put the plate 1x2 horizontally on the frontmost row, leaving the leftmost knob empty, ball cup to the front.

Find 1 medium stone grey plate 1x2.

Put it horizontally behind the previous piece.

Find 4 black rounded plates 1x1 with side shaft.

Put 1 on the leftmost knob of the front row, shaft to the left.

Put 1 behind the previous piece, shaft to the left and slightly to the back.

Put 1 on the left knob of the backmost row, shaft to the left and slightly to the back.

Put the last one to the right of the previous piece, shaft to the back.

Find 1 white quarter-circle plate 3x3.

Put it on top of the structure in the same orientation as the quarter-circle plate at the bottom.

Find 2 black quarter-circle tiles 1x1.

Put 1 on the back knob of the leftmost column, quarter circle to the back left.

Put the other one on the left knob of the backmost row, quarter circle to the back left. Make sure the two quarter-circle tiles have the same orientation.

Next, we will build 2 long flight feathers.

Collect the following 4 pieces:

2 white plates 1x1 with vertical side clasp,

and 2 medium stone grey plates 1x2.

Put 1 plate 1x2 horizontally on the table.

Put 1 plate with side clasp on the right knob, side clasp to the right.

Repeat with the 2 remaining pieces.

Find 2 white two-stepped curve tiles 1x4.

Put 1 horizontally on one feather structure from the previous step, curve to the left, 1/2 overhanging to the left.

Repeat with the remaining piece on the other feather structure.

The 2 long flight feathers are finished! Well done! Snap the clasp of 1 feather on the rightmost shaft of the wing structure pointing to the back.

Snap the clasp of the other feather on the clasp to the left of the previous feather.

Now, we build 2 short flight feathers.

Collect the following 4 pieces:

2 white plates 1x1 with vertical side clasp,

and 2 medium stone grey plates 1x2.

Put 1 plate 1x2 horizontally on the table.

Put 1 plate with clasp on the right knob, clasp to the right.

Repeat with the 2 remaining pieces.

Find 2 white one-stepped curve tiles 1x2.

Put 1 horizontally on top of the 2 previous pieces, curve to the left.

Repeat with the remaining piece on the other feather structure.

The 2 short flight feathers are finished! Well done! Snap their clasps on the 2 remaining shafts on the wing structure.

Find 1 white inverted curve disk 2x2 with 4 knobs.

Flip the wing structure upside down so that the curves and knobs are touching the table.

Put it centered on the quarter-circle plate 3x3.

Hedwig's left wing is finished! Well done! Fetch Hedwig's torso and turn it so that the tail feathers are pointing to the back and the smooth chest surface is facing you.

Flip the wing upright so that the inverted curve disk is facing you and the flight feathers are pointing to the right and to the bottom. Snap its ball cup on the ball on Hedwig's right side.

Next up, we will build Hedwig's right wing.

Collect the following 2 pieces:

1 white quarter-circle plate 3x3,

and 1 medium stone grey plate 1x2 with ball cup on long side.

Put the quarter-circle plate 3x3 on the table, right angle pointing to the front left. Make sure the knobs form straight rows and columns in front of you.

Put the plate 1x2 horizontally on the frontmost row, leaving the rightmost knob empty, ball cup to the front.

Find 1 medium stone grey plate 1x2.

Put it horizontally behind the previous piece.

Find 4 black rounded plates 1x1 with side shaft.

Put 1 on the rightmost knob of the front row, shaft to the right.

Put 1 behind the previous piece, shaft to the right and slightly to the back.

Put 1 on the right knob of the backmost row, shaft to the right and slightly to the back.

Put the last one to the left of the previous piece, shaft to the back.

Find 1 white quarter-circle plate 3x3.

Put it on top of the structure in the same orientation as the quarter-circle plate at the bottom.

Find 2 black quarter-circle tiles 1x1.

Put 1 on the back knob of the rightmost column, quarter circle to the back right.

Put the other one on the right knob of the backmost row, quarter circle to the back right. Make sure the two quarter-circle tiles have the same orientation.

Next, we will build 2 long flight feathers.

Collect the following 4 pieces:

2 medium stone grey plates 1x2,

and 2 white plates 1x1 with vertical side clasp.

Put 1 plate 1x2 horizontally on the table.

Put 1 plate with side clasp on the left knob, clasp to the left.

Repeat with the 2 remaining pieces.

Find 2 white two-stepped curve tiles 1x4.

Put 1 horizontally on one of the feather structures, curve to the right, 1/2 overhanging to the right.

Repeat with the remaining piece on the other feather structure.

The 2 long flight feathers are finished! Great job! Snap the clasp of 1 feather on the leftmost shaft of the wing structure.

Snap the clasp of the other feather on the clasp to the right of the previous feather.

Now, we will build 2 short flight feathers.

Collect the following 4 pieces:

2 white plates 1x1 with vertical side clasp,

and 2 medium stone grey plates 1x2.

Put 1 plate 1x2 horizontally on the table.

Put 1 plate with clasp on the left knob, clasp to the left.

Repeat with the 2 remaining pieces.

Find 2 white one-stepped curve tiles 1x2.

Put 1 horizontally on top of the 2 previous pieces, curve to the right.

Repeat with the remaining piece on the other feather structure.

The 2 short flight feathers are finished! Well done! Snap their clasps on the 2 remaining shafts on the wing structure.

Find 1 white inverted curve disk 2x2 with 4 knobs.

Flip the wing structure upside down so that the curves and knobs are touching the table.

Put it centered on the quarter-circle plate 3x3.

Hedwig's right wing is finished! Well done! Flip the wing upright so that the curve disk is facing you and the wing tips are pointing to the left and to the bottom.

Snap the ball cup of the wing on the ball on Hedwig's left side.

Open bag number 6. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for Hedwig's head.

Next, we will build Hedwig's head.

Collect the following 2 pieces:

1 white plate 4x4,

and 1 medium stone grey plate 1x2.

Put the plate 4x4 on the table. Make sure its knobs form straight rows and columns in front of you.

Put the plate 1x2 horizontally centered on the backmost row.

Find 2 black plates 1x3 with 2 knobs.

Put 1 vertically in front of the previous piece's left half.

Put the other one vertically to the right of the previous piece.

Collect the following 2 pieces:

1 bright red brick 1x2x1⅔ with 4 side knobs,

and 1 white brick 2x2 with large side ball.

Put the brick with ball on the 2 previous pieces, ball to the front.

Put the brick with 4 side knobs horizontally centered on the backmost row, side knobs to the back.

Find 2 medium stone grey bricks 1x4.

Put 1 vertically on the leftmost column.

Repeat symmetrically on the right.

Find 4 white top angle plates 1x2 - 2x2 with 4 side knobs.

Put 1 vertically on the previous piece's back half, side knobs to the right.

Put 1 vertically in front of the previous piece, side knobs to the right.

Repeat symmetrically on the left with the 2 remaining pieces.

Find 2 dark stone grey plates 1x2 with 1 knob.

Put 1 vertically on the left half of the brick with ball. This means it will sit on the second column from the left.

Put the other one vertically to the right of the previous piece.

Collect the following 6 pieces:

4 white bottom angle plates 1x1 - 1x1 with 1 side knob,

and 2 dark green plates 1x2.

Put 1 bottom angle plate 1x1 on the backmost knob of the rightmost column, side knob to the right.

Put 1 plate 1x2 vertically in front of the previous piece. This means it will sit centered on the rightmost column.

Put 1 bottom angle plate 1x1 in front of the previous piece, side knob to the right.

Repeat symmetrically on the left with the 3 remaining pieces. Make sure the side knobs are pointing to the left.

Find 2 medium stone grey plates 2x3.

Put 1 vertically on the 2 left columns, starting from the front edge.

Put the other one vertically to the right of the previous piece.

Find 2 medium stone grey top angle plates 1x1 - 1x2 with 2 side knobs.

Put 1 behind the previous piece on the rightmost column, 2 side knobs to the back.

Repeat symmetrically on the left, 2 side knobs to the back.

Collect the following 3 pieces:

2 white plates 1x4,

and 1 white plate 2x2.

Put 1 plate 1x4 horizontally on the backmost row.

Put the plate 2x2 centered in front of the previous piece. This means it will sit on the 4 center knobs of the top surface.

Put the other plate 1x4 horizontally on the frontmost row.

Find 4 white curve bricks 1x1 with protruding plate 1x1.

Turn 1 horizontally so that its protruding plate is pointing to the right.

Mount the protruding plate on the leftmost column's second knob from the back, curve overhanging to the left.

Put 1 horizontally in front of the previous piece, curve again overhanging to the left.

Repeat symmetrically on the right, curves overhanging to the right.

Collect the following 3 pieces:

2 dark stone grey plates 1x2 with 1 knob,

and 1 white plate 1x4.

Put 1 plate 1x2 vertically on the protruding plates of the 2 previous pieces.

Repeat symmetrically on the left.

Put the plate 1x4 horizontally on the backmost row.

Collect the following 3 pieces:

2 white plates 1x2 with 1 knob,

and 1 white flat tile 1x2.

Put 1 plate with 1 knob horizontally centered in front of the previous piece.

Put the flat tile 1x2 horizontally in front of the previous piece.

Put the other plate 1x2 horizontally in front of the previous piece.

Find 2 white quarter-circle tiles 1x1.

Put 1 to the left of the previous piece, quarter circle to the front left.

Repeat symmetrically on the right, quarter circle to the front right.

Collect the following 3 pieces:

1 white curve tile 1x4,

and 2 white quarter-circle tiles 1x1.

Put 1 quarter-circle tile upright on the backmost topmost side knob on the right side surface, quarter circle to the top back.

Put the other quarter-circle tile upright on the frontmost topmost side knob on the right side surface, quarter circle to the top front.

Put the curve tile 1x4 upright horizontally below the 2 previous pieces.

Collect the following 3 pieces:

Another white curve tile 1x4,

and another 2 white quarter-circle tiles 1x1.

Repeat the previous step symmetrically on the left: put the 2 quarter-circle tiles on the topmost side knobs pointing to the left, quarter circles to the top back and top front. Then, put the curve tile 1x4 horizontally below the 2 quarter-circle tiles.

Before we move on to the next step, flip the head structure upside down so that the top knobs are now touching the table. Make sure the large ball is still pointing to the front.

Find 2 white plates 1x2 with 3 teeth on long side.

Turn 1 upright so that the knobs are pointing to the left and the 3 teeth are pointing to the top.

Mount it horizontally centered on the top row of side knobs pointing to the left.

Repeat symmetrically on the right.

Find 2 white curve tiles 1x4.

Put 1 upright horizontally on the previous piece, locking it in.

Repeat symmetrically on the left.

Find 1 white plate 2x4.

Flip it upside down and put it vertically on the 2 middle columns of the top surface.

Find 4 white inverted one-stepped curve tiles 2x2x⅔.

Put 1 on the back right corner, curve to the right. This means its left half will sit on the back half of the previous piece's right column.

Put 1 in front of the previous piece, curve to the right.

Repeat symmetrically on the left with the 2 remaining pieces.

Find 1 white plate 2x2.

Before mounting it, flip the head structure right side up again. This means the 4 curve tiles from the previous step will now be at the bottom. This will be wobbly for now.

Now, make sure to turn the head from left to right so that the big ball is pointing to the back.

Put the plate 2x2 upright on the 4 middle side knobs pointing to the front.

Find 2 white curve tiles 1x4.

Put 1 upright vertically on the left column of the previous piece, locking it in.

Put the other one upright vertically to the right of the previous piece.

Find 4 white quarter-circle tiles 1x1.

Put 2 upright to the right of the previous piece, both quarter circles to the top right.

Repeat symmetrically on the left, quarter circles to the top left.

Collect the following 3 pieces:

1 white smooth roof tile 1x2x⅔,

and 2 white quarter-circle tiles 1x1.

Put the smooth roof tile 1x2 horizontally centered on the frontmost row at the top, slope to the front.

Put 1 quarter-circle tile to the right of the previous piece, quarter circle to the front right.

Repeat symmetrically on the left, quarter circle to the front left.

Collect the following 2 pieces:

1 white flat tile 1x1,

and 1 medium stone grey plate 1x1.

Put the flat tile on top of the plate, making sure their shapes are matching.

Turn the head structure so that the ball is pointing to the front.

Mount this stack directly in front of the smooth roof tile 1x2 we have mounted in the previous step.

Now, we will assemble a small sub-part of the head.

Collect the following 2 pieces:

1 white flat tile 1x1,

and 1 white bottom angle plate 1x1 - 1x1 with 1 side knob.

Put the angle plate on the table, side knob to the left.

Put the flat tile on top of the angle plate. Leave the side knob empty for now.

Find 1 black plate 1x1 with 1 vertical tooth.

Put it upright on the side knob, tooth at the top and pointing to the right.

Find 1 white flat tile 1x1.

Put it upright on the knob of the previous piece.

Turn the sub-part so that the flat tile 1x1 is towards the back and the tooth tip is pointing to the front.

Mount it in front of the small stack 1x1 we have mounted previously.

The tooth of this sub-part will be Hedwig's nose!

Find 2 flame yellowish orange round tiles 2x2. (These pieces are printed.)

Put one to the left of the small sub-part and the other one to its right.

These are Hedwig's eyes! They are beaming yellow eyes with large black pupils. She has a curious look on her face!

Hedwig's head is finished! Great job! Flip it upright so that the nose and eyes are towards you and the large ball is pointing to the bottom. Snap the ball into the large ball cup at the top of Hedwig's torso.

Hedwig is finished! Very well done, this was an intricate build! You can now adjust her tail feathers, her wings, and her head as you like. You can also seat her on the Privet Drive Street sign: snap the 2 clasps at the top of the street sign on the 2 handles at the bottom of Hedwig's feet. These handles are located behind the talons. The street sign clasps will fit on the middle of each handle.

You have finished building the entire set! Fantastic job, what a detailed build! Now it's time to set out on an adventure and let the beautiful nocturnal bird spread her wings. But make sure to keep Harry's trunk safe. The contents of his trunk are very precious to him, and being Harry's pet and trusted friend, Hedwig of course is very aware of that.

Enjoy!