LEGO 75410 Mando and Grogu's N-1 Starfighter™
LEGO Audio & Braille Building Instructions for the LEGO Star Wars set "Mando and Grogu's N-1 Starfighter™".
If you would like to access the help menu to find out how to use and navigate these instructions, tap with two fingers or press key "H".
Fly into action with Mando and Grogu's cool N-1 Starfighter! Put fuel in the tank at the fueling station. Jump in the cockpit with The Mandalorian, help Grogu into his passenger space and launch your mission! Explore other planets with Grogu's hover pram and The Mandalorian's jetpack. Team up with R5-D4 and fend off enemies with Mando's darksaber. Awesome!
On the box cover, the N-1 Starfighter is in the process of taking off from a sandy planet. The Mandalorian, Din Djarin, is in the cockpit maneuvering the spacecraft. It is flying off towards the right. The Starfighter is a slim, agile spaceship in different shades of grey. It has two wings with an impressive wingspan, and each wing is equipped with a cylindrical jet engine at the wing tip. The cockpit is located in the middle of the spacecraft; it is rather low with an oval canopy. Behind the cockpit, there is a slightly higher passenger compartment with a bubble canopy. The spacecraft has a rat-tail rear end. The Starfighter is followed by Grogu in his hover pram. R5-D4, the Astromech Droid, is staying behind this time, waiting for its friends to return. The fueling station for the spacecraft is located on the right edge of the box cover, and in the bottom right corner are the detailed portraits of the three Minifigures: the Mandalorian, Grogu, and R5-D4. But now, let's start building so you can explore all the stellar details of this set yourself!
Open the box. It contains 2 booklets with visual building instructions, 2 numbered bags and 1 loose piece: 1 ship underbody 4x18. We will refer to the bag numbers to guide you through the building process. Please ask a sighted person to help you identify the correct bags!
Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Grogu Minifigure, the Astromech Droid R5-D4, and the fueling station.
If you like, you can ask a sighted person to sort the pieces by color before you start building. We recommend using trays or bowls. This can make finding the correct pieces easier! However, if you would like to build without brick colors entirely, you can also ignore them or turn them off. There are different ways to sort and organize the bricks and your building process. It is up to you!
First, we will build the Grogu Minifigure.
Collect the following 2 pieces:
1 sand green Grogu head,
and 1 mud grey and sand green small Minifigure body.
Put the Grogu head on the body.
The Grogu Minifigure is finished! Well done! Grogu is a creature with green skin and big black eyes, and he is wearing a sand brown robe.
Next, we will build Grogu's hover pram.
Collect the following 2 pieces:
1 dark stone grey bottom angle plate 1x2 - 1x2 with 2 side knobs,
and 1 white plate 2x4.
Put the plate 2x4 horizontally on the table.
Put the bottom angle plate 1x2 vertically on the rightmost column, side knobs to the right.
Find 3 dark stone grey bottom angle plates 1x2 - 1x2 with 2 side knobs.
Put 1 horizontally to the left of the previous piece on the back row, side knobs to the back.
Put 1 horizontally in front of the previous piece, side knobs to the front.
Put the last one vertically on the leftmost column, side knobs to the left.
Find 1 white plate 2x4.
Put it horizontally on top of the 4 previous pieces.
Find 2 white grille tiles 1x2.
Put 1 upright horizontally on the 2 side knobs pointing to the right.
Repeat symmetrically on the left.
Find 2 bright red plates 1x2 with side rail.
Put 1 upright horizontally on the 2 side knobs pointing to the front, side rail to the top.
Repeat symmetrically at the back, side rail to the top.
Find 2 white curve tiles 1x4.
Put 1 upright horizontally on the previous piece so that it encloses it.
Repeat symmetrically at the front.
Collect the following 2 pieces:
1 bright red plate 2x2 with 1 knob,
and 1 white smooth curve brick 1x2.
Put the smooth curve brick 1x2 vertically on the rightmost column, curve to the left.
Put the plate 2x2 to the left of the previous piece. If done correctly, the leftmost column remains empty for now.
Find 1 white smooth curve brick 1x2.
Put it vertically on the leftmost column, curve to the left.
Grogu's hover pram is finished! Well done! If you like, you can take it for a ride now! Put Grogu on the single knob of the plate 2x2 and take off! The small spacecraft is highly maneuverable, and thanks to its compact size, it can be used to explore just about any place!
Next, we will build R5-D4, the Astromech Droid.
Find 1 white round brick 2x2x2 with side hole and tapered bottom. (This piece is printed.)
Put it on the table, knobs to the top. It is printed with R5-D4's circuit board and control panel, an intricate system of slots, levers, buttons, terminals, displays and indicators. The prints are grey, silver, black, blue and, most prominently, red, which is also why the droid was nicknamed "Red" by Luke Skywalker.
Find 1 white cone brick 2x2 with 1 knob. (This piece is printed.)
Put it on top of the previous piece. It is printed with the three main camera eyes and a few more technical details. If you would like to align the prints, the side with the 3 camera eyes should be towards the front, that is, aligned with the printed side of the round brick. If you like, you can ask a sighted person to help you with the print alignment, or you can choose your own alignment.
Find 2 white robot legs 1x2x2⅔ with connector.
Snap the connector of 1 robot leg into the side hole from the right, and mount the second robot leg symmetrically on the left.
R5-D4, the Astromech Droid is finished! Well done! The robot is an important ally for the Mandalorian and Grogu in their endeavors.
Next up, we will build the fueling station.
Collect the following 2 pieces:
1 dark stone grey round brick 2x2 with vertical side grooves,
and 1 beige round plate 4x4 with middle hole.
Put the round plate 4x4 on the table.
Put the round brick 2x2 centered on top of the round plate.
Find 1 medium stone grey round brick 2x2 with side hole.
Put it on top of the previous piece. Make sure that the side hole is running from left to right.
Find 1 medium stone grey cone brick 2x2 with 1 knob.
Put it on top of the previous piece.
Find 1 medium stone grey connector peg 1m with knob. (1m means that this piece is about 1 knob long.)
Insert it from the left into the side hole of the round brick 2x2. Its hollow knob will stick out towards the left.
Next, we will assemble the fuel hose.
Collect the following 2 pieces:
1 black megaphone with shaft,
and 1 black flexible hose 8½ m with 2 end tubes.
Put the narrow end of the megaphone on the left end of the flexible hose, shaft pointing to the bottom, funnel to the left.
Put the right end of the fuel hose on the knob sticking out towards the left on the fueling tank, fuel hose extending towards the left.
The fueling station is finished! Well done! It's an indispensable piece of equipment for the Starfighter. With this, we have finished building everything from bag 1. Well done! We usually pack a few extra pieces and bricks that you do not need for building this set, so if you still have some pieces left there is no need to worry that you forgot something. If you like, you can take a break now and return to the instructions later by skipping to the section introducing bag 2. If you want to continue building right away, simply move on to the next sentence.
Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Mandalorian Minifigure and the Starfighter spaceship.
Next, we will build the Mandalorian Minifigure.
Collect the following 2 pieces:
1 dark brown and black upper part of the body,
and 1 dark brown pair of legs.
Put the upper body on the legs. Make sure that the hands and toes are pointing in the same direction.
Find 1 titanium metallic clone trooper jetpack.
Put its tab with hole on the neck of the Minifigure's body, jetpack towards the back and extending down.
Collect the following 2 pieces:
1 silver metallic helmet,
and 1 warm tan Minifigure head.
Put the head on the body and the helmet on the head.
The head is printed with Din Djarin's face. He has a stubble and a thin mustache. Din Djarin has a serious look on his face, almost jaded. Being a bounty hunter is a tough job.
Next, we will build the Mandalorian's dark saber.
Collect the following 2 pieces:
1 titanium metallic lightsaber holder,
and 1 black sword blade.
Insert the shaft end of the sword blade into the slightly thicker end of the lightsaber holder.
Snap the dark saber's handle into the Minifigure's left hand.
The Mandalorian Minifigure is finished! Well done! The Mandalorian's name is Din Djarin. He is wearing armor made from beskar, an alloy also known as Mandalorian iron or Mandalorian steel that is used in Mandalorian armor and is notable for its high tolerance to extreme forms of damage. The armor shimmers in a shiny silver shade and consists of a chest plate and platings for shoulders, lower arms, thighs and the back. Mando is wearing a brown ammo belt across his chest and a brown belt with a beskar belt buckle. His helmet is also silver with a black T-shaped slit at the front for the face and some darker grey decoration prints on the sides and top.
Now, we will build the N-1 Starfighter spacecraft.
Collect the following 2 pieces:
1 medium stone grey brick 1x2x1⅔ with 4 side knobs,
and 1 medium stone grey ship underbody 4x18. (This piece was loose in the box.)
Put the ship underbody horizontally on the table, narrow tip pointing to the left.
Put the brick 1x2x1⅔ centered on the rightmost column, 4 side knobs pointing to the right.
Collect the following 2 pieces:
1 bright red brick 2x4,
and 1 reddish brown brick 1x2 with vertical and horizontal side grooves.
Put the brick 2x4 horizontally to the left of the previous piece. This means it will sit in the middle recess of the ship underbody.
Put the brick 1x2 with grooves vertically to the left of the previous piece, horizontal grooves to the left.
Collect the following 2 pieces:
1 bright red brick 2x4,
and 1 reddish brown brick 1x2 with vertical and horizontal side grooves.
Put the brick 2x4 horizontally into the middle recess, starting from its leftmost edge. This means there will be 4 empty columns between this piece and the previous piece.
Put the brick 1x2 vertically to the right of the previous piece, horizontal grooves to the right.
Find 2 medium stone grey bricks 1x4.
Put 1 horizontally on the backmost row, starting from the right edge.
Repeat symmetrically at the front.
Find 1 medium stone grey plate 4x4.
Put it centered on the rightmost edge. This means it will cover the 3 highest bricks of the current build.
Find 1 medium stone grey brick 2x4.
Put it vertically to the left of the previous piece.
Find 2 medium stone grey quarter-arched bricks 1x2 with 2 knobs.
We'll use them to make a half circle on the rightmost edge. Continue for detailed instructions.
Turn 1 so that its outer arch is towards the back right. Mount it on the 2 backmost rows on the right edge.
Put the other one in front of the previous piece, outer arch to the front right. Together, they should form a half circle.
Find 1 reddish brown round tile 2x2.
Put it into the inner arch of the 2 previous pieces.
Find 2 medium stone grey quarter-arched bricks 1x2 with 2 knobs.
Put them around the previous piece's left half so that the 4 quarter-arched bricks form a ring.
Find 1 black ring plate 4x4.
Put it on top of the 4 quarter-arched bricks.
Find 2 bright yellow panel elements 1x4x1 with panel on long side.
Put 1 horizontally on the backmost row directly to the left of the vertically mounted brick 2x4, panel to the back.
Repeat symmetrically at the front, panel to the front.
Find 1 dark stone grey smooth roof tile 1x2x⅔. (This piece is printed.)
Put it vertically between the 2 previous pieces, aligning their left edges, slope to the right.
This piece is printed with the dashboard. It consists of 2 vertically arranged control panels. There is one big red display in the bottom left corner that is probably a radar screen. A slightly smaller red display is located in the top right corner of the dashboard. There are numerous buttons and levers, all of which are necessary for the complex task of maneuvering a spacecraft.
Next up, we will build the rear tail of the Starfighter.
Collect the following 2 pieces:
1 dark stone grey plate 2x4,
and 1 medium stone grey roof tile 2x2x2, 65°.
Put the plate 2x4 vertically on the table.
Put the roof tile 2x2x2 on the back half of the previous piece, slope to the back.
Find another medium stone grey roof tile 2x2x2, 65°.
Put it in front of the previous piece, slope to the front.
Collect the following 2 pieces:
1 medium stone grey flagpole 1x1x3,
and 1 medium stone grey nose cone 2x2x2.
Put the nose cone 2x2x2 on top of the 2 previous pieces.
Put the wide end of the flagpole on the previous piece.
The rear tail of the Starfighter is finished! Great job! Before you mount it, tilt it to the right so that the flagpole is pointing to the right. Then, mount it centered on the 4 knobs pointing to the right.
Now, we will build the first wing.
Collect the following 2 pieces:
1 dark stone grey plate 1x2 with top tube,
and 1 medium stone grey slanted plate 4x9.
Put the slanted plate 4x9 vertically on the table, narrow end pointing to the back.
Put the plate 1x2 horizontally on the backmost row of the slanted plate, top tube on the left.
Find 1 medium stone grey one-stepped curve tile 1x2.
Put it vertically on the previous piece's knob and the knob in front of it, curve to the front.
Find 1 bright yellow plate 2x4.
Put it horizontally on the 2 frontmost rows of the slanted plate.
The first wing is finished! Well done! Mount it in its building orientation on the 2 backmost rows, directly to the left of the panel element 1x4x1, 7 rows protruding to the back.
Next, we will build the second wing.
Collect the following 2 pieces:
1 bright yellow plate 2x4,
and 1 medium stone grey slanted plate 4x9.
Put the slanted plate 4x9 vertically on the table, this time narrow end to the front.
Put the plate 2x4 horizontally on the 2 backmost rows.
Find 1 dark stone grey plate 1x2 with top tube.
Put it horizontally on the frontmost row, top tube to the left.
Find 1 medium stone grey one-stepped curve tile 1x2.
Put it vertically on the previous piece's knob and the knob behind it, curve to the back.
The second wing is finished! Great job! Mount it in its building orientation in front of the first wing.
Find 2 medium stone grey smooth roof tiles 1x2x⅔.
Put 1 horizontally on the wing we have just mounted, using its second row from the back, starting from its right edge, slope to the front. This means it will sit to the left of the front panel element 1x4x1.
Repeat symmetrically at the back, slope to the back.
Find 1 bright yellow plate 2x4.
Put it horizontally on the splice between the 2 wings. This means that it will sit on the 2 middle rows of the structure, connecting the 2 wings with each other.
Find 2 black plates 1x2 with vertical top clasp.
Put 1 horizontally on the right half of the previous piece's back row, clasp to the right.
Put the other one horizontally in front of the previous piece, clasp to the right.
Find 2 medium stone grey smooth roof tiles 1x2x⅔.
Put 1 horizontally to the left of the already mounted smooth roof tile 1x2 at the back, slope to the back.
Repeat symmetrically at the front, slope to the front.
Collect the following 2 pieces:
1 dark stone grey grille tile 1x2,
and 1 medium stone grey one-stepped curve tile 2x2. (This piece is printed.)
Put the curve tile 2x2 on the knobs of the plates with clasp and the column to their left, slope to the left.
This piece is printed with the hyperdrive engine. It is a round engine structure with 2 half-circle suction holes in the middle.
Put the grille tile 1x2 vertically to the left of the previous piece.
Find 1 black trapeze plate 4x4 with cut-out.
Put it horizontally on the leftmost edge of the structure, matching the shape of the ship underbody's nose. This means that its narrow end will be on the left and the cutout will be towards the right.
Find 1 medium stone grey curve piece 4x4x1 with 3 sloped sides.
Put it on top of the previous piece, matching its shape. This means that its highest edge will be on the right and the lowest edge on the left.
Now, we will build 2 jet engines.
Find 2 medium stone grey round bricks 2x2x2 with side hole and tapered bottom.
Put them next to each other on the table, tapered bottoms to the bottom. Make sure their side holes are running from front to back.
Find 2 black connector pegs 2m with middle ring.
Insert 1 into the side hole of 1 round brick from the front, 1/2 sticking out towards the front.
Repeat with the other connector peg on the second round brick.
Flip 1 to the right so that its tapered bottom is towards the left. Then insert its connector peg from the front into the top tube at the front wing tip, round brick protruding towards the front.
Repeat symmetrically at the back.
Now, we build the jet engine exhausts.
Find 2 dark stone grey round bricks 2x2 with vertical side grooves.
Put them next to each other on the table.
Find 2 medium stone grey nose cones 2x2x2.
Put them on top of the 2 previous pieces.
Find 2 dark stone grey spear tips with 4 fins.
Insert the small bottom shaft of 1 spear tip into the previous piece's hollow knob.
Repeat with the other spear tip on the second jet engine exhaust.
Tilt 1 jet engine exhaust to the right so that the spear tip is pointing to the right. Mount it on the right side surface of the front jet engine.
Repeat symmetrically at the back.
Find 2 dark stone grey shafts 8m with half-cylinder brick 1x2 and cylinder brick 1x1.
Hold 1 horizontally so that its half-cylinder brick 1x2 is on the right. Mount the half-cylinder brick horizontally on the front wing, using the 2 right knobs of the row that is located directly in front of the 2 smooth roof tiles 1x2. Make sure the shaft with cylinder brick 1x1 is extending towards the left.
Repeat symmetrically at the back.
Collect the following 2 pieces:
1 transparent oval cockpit 6x4x2 with shaft,
and 1 transparent dome 4x4.
Hold the oval cockpit horizontally, shaft on the left, and snap the shaft into the 2 clasps at the top surface. They are located directly to the left of the middle recess which is the Starfighter's cockpit.
You can fold this piece up or down as needed.
Put the dome on the ring structure at the right edge of the Starfighter. This is the passenger compartment of the spacecraft!
If you like, you can now place the Mandalorian Minifigure in the cockpit and the Grogu Minifigure in the passenger compartment. To do so, open the canopies, fold the Mandalorian's legs into a seated position, and put him into the main cockpit. Grogu fits into the passenger compartment without adjustments. Reattach the canopies and your Starfighter is ready for takeoff.
The Starfighter is finished! Well done! And you have actually finished building the entire set! Fantastic job! Now it's time to embark on the Mandalorian's intergalactic journey. Get ready for stellar space adventures!