LEGO 75264 Kylo Ren's Shuttle Microfighter 

LEGO Audio & Braille Building Instructions for the LEGO Star Wars set "Kylo Ren's Shuttle Microfighter".

Lead First Order missions with Kylo Ren's Shuttle Microfighter! Play out epic battles from Star Wars: the Rise of Skywalker, or make up your own galactic adventures.

The box cover shows Kylo Ren flying the Shuttle Microfighter at great speed!

Open the box. This can be tricky; ask someone to help you!

The box contains a booklet with visual building instructions and unnumbered bags.

Before you get started, ask a sighted person to help you sort the bricks by color. This way, you will be even faster in finding the right piece!

In the first section we are going to build the minifigure Kylo Ren.

Find 1 black pair of legs.

Put it horizontally on the table. 

Find 1 black upper part of the body.

Put it on top of the legs.

Find 1 light nougat brown head.

Put it on top.

Find 1 black Kylo Ren helmet.

Put it on top.

We are now going to build the lightsaber.

Find 1 titanium metallic lightsaber holder.

Find 1 transparent red t-shaped shaft 2x4.

Insert it into the lightsaber holder, with the t-shape closest to the holder.

Put the lightsaber into the right hand of the minifigure.

The minifigure is now finished! Well done! Put him aside for now.

In the next section we are going to build the Shuttle Microfighter.

Find 1 black plate 2x4.

Put it horizontally on the table. 

Find 2 dark stone grey plates 1x2 with hinge stub vertical/end.

Put one vertically on one knob on the rightmost edge at the back with the vertical stub to the back.

Put the other one vertically on one knob on the rightmost edge at the front with the vertical stub towards you.

Find 1 medium stone grey plate 1x4.

Put it vertically centered to the left of the previous plates.

Find 2 dark stone grey plates 1x2 with hinge stub vertical/end.

Put one vertically on the backmost knob to the left of the previous piece, hinge stub to the back.

Repeat symmetrically at the front.

Find 1 black inverted roof tile 4x2.

Put it on the leftmost edge with the slope to the left, knobs to the top.

Find 1 black plate 2x4.

Put it horizontally centered starting from the rightmost edge.

Find 2 dark stone grey plates 1x3.

Put them horizontally starting from the right, 1 in front of and 1 behind the previous plate.

Find 1 medium stone grey plate 1x2.

Put it vertically on the lower part of the inverted roof tile 4x2 on the left.

Find 1 medium stone grey plate 1x4.

Put it vertically on the rightmost edge.

Find 2 black flat tile 2x2 with top middle plate 1x2.

Careful! These pieces have a special orientation!  

Put the top plates 1x2 vertically on the rightmost edge, with the flat tiles 2x2 to the right.  

Find 1 black brick 1x4.

Put it vertically to the left of the previous pieces. 

Find 2 dark stone grey plates 1x2.

Put them vertically to the right of the previous pieces.

Turn the model so the inverted roof tile is pointing to the right.

Find 1 dark stone grey brick 1x1 with side knob and bottom foot.

Find 1 medium stone grey round plate 1x1.

Put the round plate 1x1 on the side knob of the previous piece.

Put the small build on the front row on the third knob from the left, with the side knob pointing forward.

Turn the model so the inverted roof tile is pointing to the left.

Find 1 dark stone grey brick 1x1 with side knob and bottom foot.

Find 1 medium stone grey round plate 1x1.

Put the round plate 1x1 on the side knob.

Put the small build on the front row on the third knob from the right, with the side knob pointing forward.

Find 1 black plate 2x2 with 1 knob.

Put it on top, centered at the rightmost edge.

Find 1 black round plate 1x1 with top shaft.

Put it in front of the previous plate at the rightmost edge.

Find 1 transparent red round tile 1x1.

Put it on the backmost knob on the right edge.

Find 2 black ingots 1x2.

Put one horizontally to the left of previous round tile.

Repeat symmetrically at the front.

Turn the model so the inverted roof tile is pointing away from you.

Find 1 black grooved round brick 2x2 with cross hole.

Put it on the table with the knobs pointing downwards.

Find 1 transparent bright orange round plate 1x1.

Turn the round plate upside down and put the knob in the middle of the round brick. 

Turn the small build upright so that the knob is pointing to the front.

Mount the small build on the front side surface on the right.

Let's build one more of those for the left side.

Find 1 black grooved round brick 2x2 with cross hole.

Put it on the table with the knobs pointing downwards.

Find 1 transparent bright orange round plate 1x1.

Turn the round plate upside down and put the knob in the middle of the round brick. 

Turn the small build upright so that the knob is pointing to the front.

Mount the small build on the front side surface on the left.

Now, turn the structure so that the inverted roof tile is pointing to the left again.

Find 1 black angle brick 4x4 with 2 cutouts.

Put it on the table with the slopes pointing to the left. 

Find 1 dark stone grey smooth roof tile 1x2x⅔.

Put it vertically on the right column in the middle, with the slope to the right.

The tile is printed with a flying control panel.

Find 1 dark stone grey plate 1x2.

Put it vertically to the left.

Find 1 silver metallic grille tile 1x2.

Put it vertically on top.

Mount the small build on the left with the side slopes to the left. Make sure the leftmost column remains empty!

Turn the model so the inverted roof tile is pointing towards you.

Find 1 black bottom angle plate 1x2 - 1x2 with side 2 knobs.

Find 1 dark stone grey plate 1x2.

Put the plate on top and the angle plate with 2 knobs pointing towards you.

Find 1 transparent red flat tile 1x2.

Careful!  This piece has a special orientation!  We will mount it on the side surface of the angle plate.

Mount the tile horizontally on the side knobs.

Find 1 black smooth roof tile 1x2x⅔.

Put it horizontally on top with the slope to the front.

Mount this small build on the frontmost row, flat tile 1x2 pointing towards you.

Put the model aside for now.

Next, we will build the first of 2 wings of the shuttle.

Find 1 dark stone grey plate 4x4 with hinge forks.

Put it on the table with the forks to the back. 

Find 1 medium stone grey plate 1x2.

Put it horizontally centered on the backmost row.

Find 1 black plate 1x4.

Put it horizontally in front of the previous piece with 1 knob overhanging to the left.

Find 1 black plate 2x2 with 45° corner.

Put it to the right of  the 2 previous pieces, the 45 degree corner to the back and right.

Find 1 black left wing plate 3x6 with angle.

Put it vertically on the 2 front knobs on the right with the narrow edge towards you, angled side to the right.

Find 1 black right wing plate 3x6 with angle.

Put it on the 2 front knobs to the left with the narrow edge towards you, angled side to the left.

Find 1 black right wing plate 2x3 with angle.

Turn the build upside down with the tip of the wing towards you. 

Turn the angle plate upside down and put the plate in the front with the narrow edge overhanging to the right. 

Turn the model right side up again.

Find 1 black plate 1x2 with shooter base.

Put it horizontally on the table, shooter base to the right.

Find 1 dark stone grey flat trigger with 2 small shafts.

Careful! This can be tricky, ask someone to help you if needed.

Put it on the shooter base. The small shafts fit perfectly into the notch on top of the shooter base.

Mount the shooter horizontally on the leftmost knob of the back row, shooter pointing to the left.

Find 1 black plate 3x4 with 4 knobs.

Put it horizontally all the way to the back.

Find 1 silver metallic grille tile 1x2.

Put it horizontally centered in front of previous piece.

Find 1 transparent red round tile 1x1.

Put it on 4th row from the front on the leftmost knob.

Find 1 transparent bright green round plate 1x1.

Put it on the shooter base on the left side at the back and use it for ammunition.

Warning. Do not aim at eye or face. 

Nice job, the wing is now finished. 

You are now going to mount the wing on the model. 

Turn the wing upside down with the hinge forks pointing to the right. Click the forks onto the two vertical stubs on the left side of the model.

Flip the wing in upright position. 

You are now going to build the second wing.

Find 1 dark stone grey plate 4x4 with hinge forks.

Put it on the table with the forks to the right. 

Find 1 medium stone grey plate 1x2.

Put it vertically centered on the rightmost column.

Find 1 black plate 2x2 with 45° corner.

Put it on the back row on the right edge, 45° corner to the back and right.

Find 1 black plate 1x4.

Put it vertically on the second column from the left, one knob overhanging to the front.

Find 1 black right wing plate 3x6 with angle.

Put it horizontally on the back 2 knobs of the leftmost column, angled side to the back.

Find 1 black left wing plate 3x6 with angle.

Put it horizontally in front of the previous piece, angled side to the front.

Find 1 black left wing plate 2x3 with angle.

Turn the build upside down with the tip of the wing to the left.

Turn the angle plate upside down and put the plate on the leftmost edge with the narrow edge to the back. 

Turn the model right side up again.

Find 1 black plate 1x2 with shooter base.

Put it horizontally on the table, shooter base to the right. 

Find 1 dark stone grey flat trigger with 2 small shafts.

Careful! This can be tricky, ask someone to help you if needed. 

Put it on the shooter base. The small shafts fit perfectly into the notch on top of the shooter base.

Put the shooter vertically on the front knob on the rightmost edge, shooter base to the front.

Find 1 black plate 3x4 with 4 knobs.

Put it vertically behind the previous piece on the rightmost edge.

Find 1 silver metallic grille tile 1x2.

Put it vertically centered to the left of the previous plate.

Find 1 transparent red round tile 1x1.

Put it on the 4th column from the left on the front knob.

Find 1 transparent bright green round plate 1x1.

Put it on the shooter base and use it for ammunition.

Warning. Do not aim at eye or face. 

You are now going to mount the wing on the model.

Turn the wing upside down with the forks to the left. Click the forks onto the two vertical hinge stubs on the right side of the model.  

Flip the wing in upright position. 

Your Star Wars Kylo Ren's Shuttle is finished! Great job! With his lightsaber and shuttle, he is now ready for any space battles that might come his way!

Enjoy!