LEGO 71800 Nya's Water Dragon EVO 

LEGO Audio & Braille Building Instructions for the LEGO Ninjago set "Nya's Water Dragon EVO".

Ride into battle with Nya and her water dragon EVO to take on the evil Bone Guard in a thrilling showdown! Lloyd is there to help too. Watch out as the Bone Guard uses his swords as wings to launch a flying attack with his bone shuriken. Upgrade the dragon with golden wings to make it bigger and win the battle. For completing your mission, you will be rewarded with a collectible Generosity banner.

The box cover shows a battle scene between the evil Bone Guard, standing on a green meadow in front of a huge waterfall, and the water dragon EVO who is lunging out of the waterfall in its flying attack pose. EVO is a beautiful water dragon: Its neck and chest are wavy and smooth, just like flowing water. Its color scheme features several shades of dark and light blue with white features worked in as well. In its evolved form, the dragon wears golden armor and wings as well as a golden tail tip. Its spiky tail can be used as a weapon too! Nya is sitting in EVO's saddle with her sword drawn. Meanwhile, Lloyd is on the ground, running towards the Bone Guard to support EVO and Nya in their battle. In the background of the scene, the sun is setting over a peaceful mountain landscape.

Open the box. This can be tricky; ask someone to help you.

The box contains 1 booklet with visual building instructions, 3 bags with numbers printed on them and 1 small bag without number print. Ask a sighted person to help you find the correct bag!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Nya Minifigure and the torso and head of the water dragon. However, do not open the separate unnumbered bag for now.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we will build the Nya Minifigure.

Collect the following 2 pieces:

1 dark stone grey pair of legs,

and 1 titanium metallic and dark azure blue upper part of the body.

Put the upper body on the legs.

Collect the following 2 pieces:

1 bright yellow Minifigure head,

and 1 titanium metallic shoulder armor with sheath.

Put the ring of the shoulder armor around Nya's neck. Make sure the armor runs over her shoulder towards the back.

Put the head on the body.

Find 1 titanium metallic and dark azure blue ninja hat.

Put it on the head.

Find 1 warm gold katana sword 6m. (6m means that this piece is around 6 knobs long.)

Snap its handle into Nya's hand.

The Nya Minifigure is finished! Well done! Nya is wearing her Ninjago Core suit: it is a traditional ninja suit in different shades of metallic blue, grey and silver. Her pants are grey with a white rope above the knees. Her jacket is dark grey with metallic grey and metallic blue embellishments and held together by white belt. One sleeve of the jacket is bright blue. The right side of the jacket is embellished with shimmering blue ornaments that mimick crashing waves. Perfect for the Ninja of Water! The jacket has a blue trim, and at the back it features the Ninjago logo in the center. Her hat is dark grey with a bright blue band wrapped around her forehead. She has long lashes and pale pink lips as well as a beauty spot on her right cheek. Her head is printed with two facial expressions: on one side, it shows a joyful smile. The other side shows a determined, yet adventurous frown. Nya is ready for action!

Next, we will build the torso of the water dragon.

Collect the following 2 pieces:

1 white plate 2x10,

and 1 white inverted roof tile 2x2, 45°.

Put the plate 2x10 vertically on the table.

Put the inverted roof tile on the backmost row, slope to the back.

Find 2 medium stone grey bricks 1x2 with 2 side knobs on long side.

Put 1 vertically in front of the previous piece on the right column, side knobs to the right.

Put the other one vertically to the left of the previous piece, side knobs to the left.

Find 1 white brick 2x3.

Put it vertically in front of the 2 previous pieces.

Find 1 white round brick 4x4 with top hole.

Put it centered in front of the previous piece, symmetrically overhanging to the left and right.

Find 1 medium stone grey plate 1x2 with ball cup on long side.

Put it horizontally on the frontmost row, ball cup to the front.

Find 2 dark stone grey plates 1x2 with ball on short side.

Put them horizontally next to each other on the second row from the front (this is the row directly behind the previous piece, balls overhanging to the left and right.

Find 1 baby blue plate 2x6.

Put it vertically centered behind the 2 previous pieces.

Find 2 transparent light blue round plates 1x1 with through-hole.

Put 1 on the knob to the left of the previous piece's front row.

Repeat symmetrically on the right. If done correctly, these 2 pieces sit on the outermost knobs of the third row from the front.

Find 2 medium stone grey bricks 1x2 with 2 side knobs on long side.

Put 1 vertically on the left column behind the plate 2x6, side knobs to the left.

Repeat symmetrically on the right, side knobs to the right. If done correctly, the backmost row of the build remains empty for now.

Find 2 earth blue plates 1x4.

Put 1 vertically in front of the previous piece.

Repeat symmetrically on the left.

Find 1 earth blue curved disk 4x4 with 4 knobs.

Put it centered on the frontmost edge directly behind the ball cup.

Find 1 earth blue one-stepped curve tile 2x3.

Put it vertically on the step on the top surface formed by the 2 bricks 1x2 with side knobs, curve to the front. If done correctly, the 2 backmost rows will remain empty for now.

Now, we will make a small sub-part of the dragon's torso.

Collect the following 2 pieces:

1 earth blue plate 1x4,

and 1 dark stone grey plate 1x2 with ball on short side.

Put the plate 1x4 horizontally on the table.

Put the plate 1x2 horizontally on the right half of the plate, ball to the right.

Find another dark stone grey plate 1x2 with ball on short side.

Put it horizontally on the left half of the plate, ball to the left.

The small sub-part of the dragon's torso is finished! Before you mount it, turn the dragon body from front to back. Now, the round 4x4 portion of the body should be at the back.

Mount the sub-part horizontally on the second row from the front, symmetrically overhanging to the left and right. This means it will sit on the highest portion of the build.

Find 1 bright purple brick 1x2x1⅔ with 4 side knobs.

Put it horizontally on the frontmost row, 4 side knobs to the front.

Find 1 bright yellow one-stepped plate 2x2 with 2 side knobs.

Put it centered on the 2 frontmost rows, 2 side knobs to the front.

Find 2 white smooth roof tiles 1x1x⅔.

Put 1 on the second row from the front on its leftmost knob, slope to the left.

Repeat symmetrically on the right, slope to the right.

Find 1 white brick 1x2.

Put it horizontally between the 2 previous pieces.

Find 1 medium stone grey brick 1x2 with 2 side knobs on long side.

Put it horizontally in front of the previous piece, side knobs to the front.

We will later mount the dragon's chest on these 8 side knobs.

Find 1 earth blue top angle plate 1x2 - 2x2 with 4 side knobs.

First, turn the build from back to front again. Now, the round 4x4 portion is at the front again.

Put it horizontally on the second row from the back, 4 side knobs to the front.

Find 1 white brick 1x2.

Put it horizontally behind the previous piece on the backmost row.

Find 2 white bricks 1x1 with side knob.

Put 1 in front of the previous piece on the left knob, side knob to the left.

Put the other one to the right of the previous piece, side knob to the right.

Find 1 white plate 2x2 with top hinge stub and 2 knobs.

Put it on the 4 backmost knobs, hinge stub to the back.

Find 1 earth blue top angle plate 1x2 - 2x2 with 4 side knobs.

Put it horizontally on the 2 front knobs of the previous piece, 4 side knobs to the front.

Next, let's make a sub-part of the dragon's neck.

Collect the following 2 pieces:

1 earth blue plate 2x2,

and 1 earth blue smooth roof tile 1x2x⅔.

Put the plate 2x2 on the table.

Put the roof tile vertically on the left column, slope to the left.

Find 1 earth blue one-stepped curve tile 2x3.

Put it horizontally on the right column, curve to the right, 2/3 overhanging to the right.

Flip the sub-part upright vertically so that the smooth roof tile 1x2 is towards the bottom and the smooth surface is facing you.

Mount it on the 8 side knobs pointing towards you.

Find 1 earth blue smooth roof tile 1x2x⅔.

Put it horizontally on the row behind the sub-part we have just mounted, slope to the front.

Now, we will build a side panel of the neck.

Collect the following 3 pieces:

1 baby blue half-circle plate 3x6 with cut-out 1x2,

and 2 earth blue quarter-arched tiles 2x2.

Put the half-circle plate horizontally on the table, half circle to the back.

Turn 1 quarter-arched tile so that its outer curve is to the back left. Mount it on the left half of the half-circle plate, starting from the back, leaving the knobs of the frontmost row empty.

Put the other quarter-arched tile to the right of the previous piece, mirroring the previous piece.

Find 2 earth blue one-stepped curve tiles 1x2x⅔.

Put 1 vertically in front of the previous piece, curve to the front, 1/2 overhanging to the front.

Repeat symmetrically on the left.

The side panel of the neck is finished! Well done! Flip it upright so that the half circle is pointing to the back and the 2 curve tiles are pointing towards you. Make sure the smooth surfaces and knobs are to the right.

Mount it on the side knobs pointing to the right. Make sure its cutout hugs the ball and roof tile sticking out towards to the right.

If done correctly, 2 side knobs pointing to the right at the bottom will remain empty for now.

Next, we will assemble a small sub-part of the side body.

Collect the following 2 pieces:

1 baby blue rounded plate 1x2,

and 1 baby blue curve tile 1x4.

Put the rounded plate 1x2 horizontally on the table.

Put the curve tile 1x4 horizontally on top, fully covering the previous piece.

Flip it upright, its tips pointing to the front and back, the curved side pointing to the right.

Mount it on the 2 side knobs direclty in front of the side panel we have mounted earlier. Leave the knobs of the side panel itself empty.

Next up, we will build the dragon's chest panel.

Collect the following 2 pieces:

1 earth blue plate 2x2,

and 1 white one-stepped curve tile 2x2x⅔.

Put the plate 2x2 on the table.

Put the curve tile 2x2 on the right column, curve to the right, 1/2 overhanging to the right.

Find another white one-stepped curve tile 2x2x⅔.

Put it to the left of the previous piece, curve to the left, 1/2 overhanging to the left.

The dragon's chest panel is finished! Before you mount it, turn the dragon's body from front to back. The high portion is now facing you.

Mount the chest panel upright vertically on the 8 side knobs pointing towards you.

Now, we build the second side panel of the neck.

Collect the following 3 pieces:

1 baby blue half-circle plate 3x6 with cut-out 1x2,

and 2 earth blue quarter-arched tiles 2x2.

Put the half-circle plate horizontally on the table, half circle to the back.

Put 1 quarter-arched tile on the left half, outer curve to the back, starting on the backmost knob and leaving the frontmost row empty.

Put the other quarter-arched tile to the right of the previous piece, mirroring it.

Find 2 earth blue one-stepped curve tiles 1x2x⅔.

Put 1 vertically in front of the previous piece, curve to the front, 1/2 overhanging to the front.

Repeat symmetrically on the left.

The second side panel of the neck is finished! Well done! Flip it upright, half circle pointing towards you, flat tiles and knobs pointing to the right, and mount it on the side knobs pointing to the right. Make sure to fit the cutout around the ball and roof tile again.

Next, we will make another small sub-part of the side body.

Collect the following 2 pieces:

1 baby blue rounded plate 1x2,

and 1 baby blue curve tile 1x4.

Put the rounded plate 1x2 horizontally on the table.

Put the curve tile horizontally on top, fully covering the rounded plate.

Mount it upright on the 2 side knobs behind the side panel we have just mounted.

Find 1 black hinge fork with cross hole 1m. (1m means that this piece is around 1 knob long.)

Snap the hinge fork on the hinge stub at the top of the dragon's highest portion.

Fold the hinge fork down so that it is pointing towards you. This is where we will later mount the dragon's head.

Next, we will build the dragon's head.

Collect the following 3 pieces:

1 earth blue dragon upper jaw with snout, (do not confuse it with the lower jaw. The upper jaw has side prints and a clearly formed snout with teeth at the bottom while the lower jaw has a pointy, beard-like tip.)

and 2 baby blue rounded plates 1x2.

Put the upper jaw on the table, snout pointing to the left.

Put 1 rounded plate 1x2 vertically on the front half of the right column.

Put the other rounded plate vertically behind the previous piece.

Find 2 earth blue one-stepped curve tiles 1x2x⅔.

Put them horizontally on the 2 middle rows, curves to the left.

Find 1 bright red cross axle 2m with 2 grooves. (2m means that this piece is roughly 2 knobs long.)

First, flip the upper jaw upside down, making sure that the snout is still pointing to the left.

Identify the hole in the middle of the squared structure of the jaw.

Insert the cross axle from the top into this hole, 1/2 sticking out towards the top.

Find 1 medium stone grey cross axle bushing 1m with cross axle pin.

Put the cross axle bushing on the cross axle you have just placed. Make sure its cross axle pin is pointing to the right.

Find 2 dark stone grey plates 1x3 with 2 clasps and 1 knob.

Flip 1 upright, clasps and knobs pointing to the left.

Snap the lower clasp on the back shaft pointing to the right.

Repeat symmetrically at the front.

Find 1 baby blue lower jaw with dragon beard.

Turn it upside down so that the pointy beard is pointing to the top, 2 shafts pointing to the right.

Snap the 2 shafts of the lower jaw into the 2 top clasps, coming from the left.

Find 2 transparent light blue curly tendrils with shaft.

Flip the dragon head right side up, snout pointing to the left.

Insert one tendril shaft into the hollow knob at the back on the right edge, tendril pointing to the right.

Repeat symmetrically at the front.

The dragon's head is finished! Well done! To mount it, insert the cross axle pointing out towards the right into the hinge fork with cross hole on the body.

You can tilt the dragon's head up and down again, and you can open the mouth. The sides of his head are printed with the dragon's eyes: he has white eyes with black pupils and metallic teal eyelids; the eyes are surrounded by mettalic teal scales. What a magnificent creature!

Open bag number 2 and any small sub-bags in it. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the dragon's 4 legs and the dragon tail.

Next, we will build the first of two hind legs.

Collect the following 2 pieces:

1 white quarter-circle plate 3x3,

and 1 transparent light blue round plate 1x1 with through-hole.

Put the quarter-circle plate 3x3 on the table, outer corner pointing to the back right, quarter circle to the front left.

Make sure that its knobs form straight rows and columns in front of you.

Put the round plate on the backmost knob of the rightmost column. This means it will sit on the outer corner of the quarter-circle plate.

Find 1 medium stone grey plate 1x2 with ball cup on long side.

Put it horizontally to the left of the previous piece, ball cup to the back.

Find 1 earth blue quarter-arched tile 2x2.

Put it in front of the previous piece, outer curve matching the curve of the base plate.

Find 1 black plate 2x2 with ball on side shaft.

Put it to the right of the previous piece on the right column, 1 column and shaft with ball overhanging to the right.

Find 1 earth blue quarter-circle plate 3x3.

Put it on top, matching the shape of the quarter-circle plate at the bottom. This means that the previous piece's right column and shaft with ball are still protruding to the right.

Find 1 earth blue one-stepped curve tile 2x2x⅔.

Put it on the protruding column and the 2 knobs to its left, curve to the right.

Next, we will assemble the hind foot.

Collect the following 2 pieces:

1 earth blue plate 2x2,

and 1 white rounded plate 1x2.

Put the plate 2x2 on the table.

Put the rounded plate 1x2 vertically on the right column.

Find 1 medium stone grey plate 1x2 with ball cup on long side.

Put it vertically on the left column, ball cup to the left.

Find 1 baby blue roof tile 2x2, 45°.

Put it on top, slope to the left.

Find 1 white plate 1x2 with 2 vertical teeth.

Put it vertically on the previous piece, longer tooth to the front.

The hind foot is finished! Tilt it towards you, and put it on the table so that the 2 teeth are pointing towards you, slope towards the left.

Coming from the right, snap the ball cup on the ball of the hind leg.

The hind leg is finished! Well done! Leave it flat on the table, and turn it vertically so that its ball cup is pointing to the left, and the teeth on the hind foot are pointing to the right.

We will be building all four legs flat at first. Don't worry, of course your dragon will be able to proudly stand on its legs in the end, but assembling it is easier when we keep things flat for now. Let's continue!

Next, we will build the dragon's first foreleg.

Collect the following 2 pieces:

1 baby blue bent plate 2x6 with 2 steps and fixed joint,

and 1 medium stone grey plate 1x2 with ball cup on long side.

Put the bent plate 2x6 on the table, fixed joint pointing to the back.

Put the plate 1x2 vertically on the rightmost column, ball cup overhanging to the right.

Find 1 medium stone grey plate 1x2 with ball cup on long side.

Put it vertically on the leftmost column, ball cup to the left.

Find 1 earth blue plate 2x3.

Put it horizontally on the left half of the bent plate. Its rightmost column will rest on the fixed joint.

Find 2 white plates 1x1 with horizontal side clasp.

Put 1 on the rightmost knob of the back row, clasp to the back.

Put the other one to the left of the previous piece, clasp to the back.

Find 1 earth blue one-stepped curve tile 2x2x⅔.

Put it on the 4 rightmost knobs, curve to the front. It will cover the 2 previous pieces and the knobs in front of them.

Now, we will build the front foot.

Collect the following 2 pieces:

1 baby blue one-stepped plate 2x2 with 2 side knobs,

and 1 dark stone grey plate 1x2 with ball on long side.

Put the one-stepped plate on the table, 2 side knobs pointing to the right.

Put the plate with ball vertically on the left column, ball to the left.

Find 1 baby blue roof tile 2x2, 45°.

Put it on top, slope to the left.

Find 1 white round tile 2x2.

Put it upright on the 2 side knobs pointing to the right. Make sure that its lower half connects to those side knobs.

Find 1 white rounded plate 1x2.

Put it vertically on top of the foot build.

Find 2 white fangs with shaft. (These are pointy tooth pieces.)

Insert the shaft of one fang into the back knob of the previous piece, tip of the fang pointing to the right.

Repeat symmetrically at the front.

The front foot is finished! Before you mount it, tilt it towards you and put it on the table, 2 fangs pointing towards you, ball pointing to the left.

Snap the ball of the foot into the right ball cup of the leg.

The dragon's foreleg is finished! Well done! Keep it in its building orientation, and snap its left ball cup on the ball pointing to the right at the front of the dragon body.

Next, we will build the second hind leg.

Collect the following 2 pieces:

1 white quarter-circle plate 3x3,

and 1 transparent light blue round plate 1x1 with through-hole.

Put the quarter-circle plate 3x3 on the table, outer corner pointing to the back left. Make sure the knobs are forming straight rows and columns in front of you.

Put the round plate on the backmost knob of the leftmost column.

Find 1 medium stone grey plate 1x2 with ball cup on long side.

Put it horizontally to the right of the previous piece, ball cup to the back.

Find 1 earth blue quarter-arched tile 2x2.

Put it in front of the previous piece, outer curve matching the curve of the base plate.

Find 1 black plate 2x2 with ball on side shaft.

Put it to the left of the previous piece on the right column, 1 column and shaft with ball overhanging to the left.

Find 1 earth blue quarter-circle plate 3x3.

Put it on top, matching the shape of the quarter-circle plate at the bottom. This means that the previous piece's left column and shaft with ball are still protruding to the left.

Find 1 earth blue one-stepped curve tile 2x2x⅔.

Put it on the protruding column and the 2 knobs to its right, curve to the left.

Next up, we will build the second hind foot.

Collect the following 2 pieces:

1 earth blue plate 2x2,

and 1 white rounded plate 1x2.

Put the plate 2x2 on the table.

Put the rounded plate 1x2 vertically on the right column.

Find 1 medium stone grey plate 1x2 with ball cup on long side.

Put it vertically on the left column, ball cup to the left.

Find 1 baby blue roof tile 2x2, 45°.

Put it on top, slope to the left.

Find 1 white plate 1x2 with 2 vertical teeth.

Put it vertically on the previous piece, longer tooth to the front.

The second hind foot is finished! Tilt it on its back side. Turn it so that the 2 teeth are pointing towards you, but this time make sure that the slope and the ball cup are towards the right.

Coming from the left, snap the ball cup on the ball of the hind leg.

The second hind leg is finished! Well done! Turn it vertically so that its ball cup is pointing to the right, and the teeth on the hind foot are pointing to the left.

Coming from the left, snap the ball cup onto the ball at the back of the body.

Now, we will build the second foreleg.

Collect the following 2 pieces:

1 baby blue bent plate 2x6 with 2 steps and fixed joint,

and 1 medium stone grey plate 1x2 with ball cup on long side.

Put the bent plate 2x6 on the table, fixed joint pointing to the back.

Put the plate 1x2 vertically on the leftmost column, ball cup overhanging to the left.

Find another medium stone grey plate 1x2 with ball cup on long side.

Put it vertically on the rightmost column, ball cup to the right.

Find 1 earth blue plate 2x3.

Put it horizontally on the right half of the bent plate. Its leftmost column will rest on the fixed joint.

Find 2 white plates 1x1 with horizontal side clasp.

Put 1 on the leftmost knob of the back row, clasp to the back.

Put the other one to the right of the previous piece, clasp to the back.

Find 1 earth blue one-stepped curve tile 2x2x⅔.

Put it on the 4 leftmost knobs, curve to the front. It will cover the 2 previous pieces and the knobs in front of them.

Next, we will build the front foot.

Collect the following 2 pieces:

1 baby blue one-stepped plate 2x2 with 2 side knobs,

and 1 dark stone grey plate 1x2 with ball on long side.

Put the one-stepped plate on the table, 2 side knobs pointing to the left.

Put the plate with ball vertically on the right column, ball to the right.

Find 1 baby blue roof tile 2x2, 45°.

Put it on top, slope to the right.

Find 1 white round tile 2x2.

Put it upright on the 2 side knobs pointing to the left. Make sure that its lower half connects to those side knobs.

Find 1 white rounded plate 1x2.

Put it vertically on top of the foot build.

Find 2 white fangs with shaft.

Insert the shaft of one fang into the back knob of the previous piece, tip of the fang pointing to the left.

Repeat symmetrically at the front.

The second front foot is finished! Before you mount it, tilt it towards you and put it on the table, 2 fangs pointing towards you, ball pointing to the right.

Snap the ball of the foot into the left ball cup of the leg.

The second foreleg is finished! Great job! Keep it in its building orientation. Snap its right ball cup on the ball pointing to the left at the front of the dragon body.

Next, we will assemble the dragon's tail.

Collect the following 2 pieces:

1 white rounded plate 1x2,

and 1 dark stone grey plate 1x2 with ball and ball cup on short sides.

Put the rounded plate horizontally on the table.

Put the plate with ball and ball cup horizontally on top, ball to the right, ball cup to the left.

Find 1 earth blue plate 1x2 with 1 knob.

Put it horizontally on top.

Find 1 transparent light blue smooth roof tile 1x1x⅔.

Put it on the previous piece, slope to the right.

Next, let's make the second link of the dragon's tail.

Collect the following 2 pieces:

1 white rounded plate 1x2,

and 1 dark stone grey plate 1x2 with ball and ball cup on short sides.

Put the rounded plate 1x2 horizontally on the table.

Put the plate with ball and ball cup horizontally on top, ball to the right, ball cup to the left.

Find 1 earth blue plate 1x2 with 1 knob.

Put it horizontally on top.

Find 1 transparent light blue smooth roof tile 1x1x⅔.

Put it on the previous piece, slope to the right.

The second link of the dragon's tail is finished! Snap its ball into the ball cup of the first link. Align them horizontally.

Now, we will build the tail tip.

Collect the following 2 pieces:

1 white nose cone 1x1,

and 1 transparent light blue round plate 1x1 with through-hole.

Put the round plate 1x1 on the table.

Put the nose cone 1x1 on top, narrow end to the top.

Find 1 dark stone grey shaft 1m with ball.

Insert the shaft into the nose cone from the top.

The tail tip is finished! Tilt it and hold it horizontally, ball to the right, and snap the ball into the ball cup on the tail.

The dragon's tail is finished! Well done! Snap its ball onto the ball cup between the dragon's hind legs.

You have finished building EVO the water dragon in its initial form! Fantastic job! It is time to let your dragon stand tall: lift it up and fold all 4 legs down. Make sure that the teeth and fangs of the 4 feet are pointing forward in the direction of the head.

Adjust the legs and feet as needed until you find a steady stance for EVO. On EVO's back, there are 2 surfaces with 2x2 knobs which means that 2 Minifigures can ride the dragon. What a magnificent creature, very well done! Now, to transform EVO into his evolved form and to build the Lloyd and Bone Guard Minifigures, let's continue building!

Open bag number 3 and any small sub-bags in it. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Bone Guard Minifigure, the golden upgrades for the water dragon, and the Lloyd Minifigure.

Next, we will assemble the Bone Guard Minifigure.

Now, you can also open the separate unnumbered bag. It will contain all-white pieces that belong to the Bone Guard Minifigure. No need to add them to the other bricks and pieces of bag 3.

Collect the following 2 pieces:

1 black, silver metallic and pale lime green upper part of the body,

and 1 black pair of legs.

Put the upper body on the legs.

Collect the following 2 pieces:

1 black Minifigure head, (Do not confuse it with Lloyd's Minifigure head (which is yellow). Ask a sighted person for help if you are not sure.)

and 1 black back plate with 4 shafts and neck bracket.

Put the neck bracket around the neck, back plate to the back, hanging downwards.

Put the head on the body.

Find 2 white mechanical arms with clasp. (These are small elements consisting of a small cube with holes and a bent clasp.)

Turn the Minifigure from left to right so that the back plate is facing you.

Hold 1 mechanical arm upright vertically, cube to the top, clasp to the bottom and pointing to the back.

Snap the clasp on the top right shaft. The mechanical arm will be attached at an angle.

Repeat symmetrically with the second mechanical arm on the top left shaft.

Find 2 white bone swords.

Hold one upright with its tip pointing to the bottom and its ribbed edge to the left.

Insert the sword handle at an angle from the bottom right into the hole of the right mechanical arm cube.

If done correctly, the handle will slightly protude towards the top left. The curved edge of the sword is towards the top right, and the ribbed edge is to the bottom left.

Hold the other sword upright, again with its tip pointing to the bottom, the ribbed edge to the right this time.

Insert its handle into the left mechanical arm cube from the bottom left.

Find 2 white bone axes.

Hold it upright vertically, blade at the top and pointing to the right, and tilt it slightly to the right.

Insert it from the top right into the top hole of the right mechanical arm cube.

Hold the other axe upright vertically, blate at the top, pointing to the left. Tilt the axe slightly to the left.

Insert it from the top left into the top hole of the left mechanical arm cube.

Collect the following 3 pieces:

2 white bone shurikens, (these are throwing stars made from bones)

and 1 bright red samurai hat. (This is a disk with an elevated center and fine relief seams.)

Snap the shurikens into the Bone Guard's hands.

Put the samurai hat on his head.

The Bone Guard Minifigure is finished! Well done! The creepy black monster has a faintly neon-green skull face with a grim look. His eyes are a fiery red. His neck and chest are wrapped in mummy bandages. His skeleton ribcage is peeking out from underneath. He is wearing silver metallic armor plates extending from his torso to his legs. They are decorated with skulls and spikes. The intricate weapon arsenal mounted on his back can act as a pair of bony wings! You can adjust the mechanical arms to change the position of the weapon wings. What a grim adversary. It is time to arm the water dragon!

Now, we will upgrade EVO the water dragon with golden armor.

Collect the following 6 pieces:

4 warm gold triple-sloped roof tiles 1x2,

and 2 warm gold armor pieces 2x5 with fin.

Put 1 armor piece horizontally on the table, fin to the right, 4 top knobs on the left.

Put 1 triple-sloped roof tile vertically on the leftmost column, straight edge to the right.

Put another triple-sloped roof tile vertically to the right of the previous piece, straight edge to the right.

Repeat with the other 3 pieces.

Flip 1 armor piece upright, fin to the top, and mount it at the top of the dragon's foreleg (on the plate 2x3).

Repeat symmetrically on the second foreleg.

Find 1 warm gold Japanese dagger.

Insert its shaft into the tip of the dragon tail.

Next, we will give the dragon its bladed wings.

Collect the following 8 pieces:

4 warm gold small tubes with shaft,

and 4 warm gold sword blades 10m with shaft.

Hold 1 small tube horizontally, opening to the right, its shaft running from front to back (not top to bottom).

Hold 1 sword blade horizontally, sword shaft pointing to the left, blade bending slightly upwards towards the right.

Insert the sword's shaft into the small tube.

Repeat 3 times with the 6 remaining pieces.

Identify the 2 clasps on each foreleg pointing to the back. They are relatively at the bottom of the forelegs.

Snap 2 bladed wings into the 2 clasps of each wing. Fold 1 slightly towards the top and the second one a bit lower. Of course, you can adjust their positions as you please.

Next, we will assemble the saddle.

Collect the following 2 pieces:

1 reddish brown round plate 2x2,

and 1 warm gold plate 1x2 with 2 side handles.

Put the round plate 2x2 on the table.

Put the plate 1x2 vertically on the left column, handles pointing to the right.

Find 1 warm gold plate 1x2 with shaft on long side.

Put it vertically on the right column, shaft to the right.

Find 1 reddish brown plate 2x2 with 2 knobs.

Put it on top, 2 knobs forming a column on the left.

The saddle is finished! Great job! Before you mount it, turn the dragon so that its head is pointing to the left.

Mount the saddle on the left set of 2x2 knobs on the dragon's back, shaft to the right. Leave the right 2x2 knobs empty for now.

Next, we build the generosity banner with flagpole.

Collect the following 2 pieces:

1 black shaft 6m with ring, (6m means that this shaft is roughly 6 knobs long)

and 1 reddish brown small tube with clasp.

Hold the small tube upright, clasp pointing to the bottom.

Hold the shaft upright, shaft end with ring to the bottom, and insert it from the top into the small tube.

Find 1 bright red plate 1x2 with 2 vertical clasps on long side.

Hold it upright vertically, clasps to the left, knobs pointing towards you, and snap the clasps from the right on the flagpole.

Find 1 bright red flat tile 2x3. (This piece is printed.)

Put it upright vertically on the previous piece, using the 2 topmost connection points of its left column.

If done correctly, the plate 1x2 and flat tile 2x3 are flush at their top left corners.

The flat tile is printed with the sign of generosity: it is a picture of the Sword of Fire with two hands reaching for the sword. This print is pale blue and white with a red and golden frame.

The generosity banner with flag pole is finished! Well done! Snap the clasp at its bottom into the shaft of the saddle. Rotate the banner so that it is extending towards the dragon tail.

Now, we will build the Lloyd Minifigure.

Collect the following 2 pieces:

1 olive green pair of legs,

and 1 dark green, mossy green and bright yellowish green upper part of the body.

Put the upper body on the legs.

Collect the following 2 pieces:

1 bright yellow Minifigure head,

and 1 titanium metallic shoulder armor with sheath.

Put the neck ring of the shoulder armor around the neck. Make sure the armor runs over Lloyd's left shoulder towards the back.

Put the head on the body.

Find 1 dark green and bright yellowish green ninja hat.

Put it on the head.

Find 1 warm gold katana sword 6m.

Snap it into Lloyd's hand.

The Lloyd Minifigure is finished! Great job! Ninjago Core suit in different shades of green. It is decorated with a light green dragon wrapping around his chest from the front to the back. The left sleeve is light green, the right sleeve dark green. Lloyd has green eyes and a grim but determined look on his face. Clenching his theeth, he is ready to face any challenge. The dragon head and the Ninjago dojo symbol decorate the back of Lloyd's suit. His hat is a typically wrapped ninja hat with special padding around the forehead and the mouth for protection. Lloyd is ready to fight!

You have finished building the entire set! Very well done! Now that everybody is armed and ready, it is time to defend the Ninjago universe against the Bone Guard. Watch out for his arsenal of weapons. It is dangerous to even come close to him! But with united forces and the power of the water dragon, the Ninjagos will succeed.

Enjoy!