LEGO 60461 Red Farm Tractor with Trailer & Sheep  

LEGO Audio & Braille Building Instructions for the LEGO City set "Red Farm Tractor with Trailer & Sheep".

If you would like to access the help menu to find out how to use and navigate these instructions, tap with two fingers or press key "H".

Join the farmer and his daughter in the LEGO City countryside. Hitch up the trailer and load the hay bales, basket of carrots and your cute puppy dog. Then jump aboard the cool red tractor and head for the fields. Rough ground is no problem for these huge tires! Feed the sheep some tasty hay and check the lambs are healthy. Fun farming adventures await in LEGO City!

The box cover shows a sunny day on the farm! The farmer is driving his red tractor on a dusty farm road, the trailer packed with farm supplies. The tractor is a sturdy open-station tractor, this means it does not have a driver's cabin. Like most tractors, its rear wheels are larger than the front wheels so they don't get stuck in the dirt and can pull heavy things more easily. The farm road is surrounded by meadowy hills, and two adult sheep are grazing in the background. In front of the tractor, the farmer's daughter is playing with a little lamb that climbed on top of a hay bale. The girl has a carrot in her hand, a tasty treat for a little lamb! She is accompanied by her puppy dog who is a great helper on the farm. In the background of the scene there is a barn with large hay bales stacked up front, two large wind wheels for power generation, and the farmer's house. There are a few lush trees around the house and the sky is blue, spotted only with a few white clouds. Perfect conditions for a productive day on the farm! Let's get started!

Open the box. It contains 2 booklets with visual building instructions, 2 numbered bags and 1 loose piece: 1 brick 4x10 with 4 side connectors. We will refer to the bag numbers to guide you through the building process. Please ask a sighted person to help you identify the correct bags!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Farmer Minifigure and the Tractor.

If you like, you can ask a sighted person to sort the pieces by color before you start building. We recommend using trays or bowls. This can make finding the correct pieces easier! However, if you would like to build without brick colors entirely, you can also ignore them or turn them off. There are different ways to sort and organize the bricks and your building process. It is up to you!

Next up, we will build the Farmer Minifigure.

Collect the following 2 pieces:

1 sand green and brown upper part of the body,

and 1 medium nougat brown pair of legs.

Put the upper body on the legs. Make sure that hands and toes are pointing in the same direction.

Collect the following 2 pieces:

1 earth blue billed cap,

and 1 bright yellow Minifigure head.

Put the head on the body.

Put the cap on top, bill to the front.

Find 1 dark stone grey shovel.

Snap its handle into the Minifigure's left hand, shovel part to the bottom.

The Farmer Minifigure is finished! Well done! The farmer is wearing brown dungarees and a muted green shirt with long sleeves and a collar. The V-neck reveals that he is wearing a white undershirt underneath. The dungarees have a large chest pocket at the front where the farmer can store small items that he needs for his work. He has a ginger beard with sideburns and a bushy mustache. The farmer is giving us a broad smile. He seems to love what he is doing!

Next, we will build the Tractor.

Collect the following 2 pieces:

1 black brick 4x10 with 4 side connectors, (this piece was loose in the box)

and 1 dark stone grey flat tile 1x4.

Put the brick 4x10 horizontally on the table, connectors pointing to the front and back.

Put the flat tile horizontally on the backmost row, aligned with the leftmost edge.

Find 1 dark stone grey brick 1x2 with downward half arch.

Put it horizontally to the right of the previous piece, downward arch to the left.

Find 1 dark stone grey brick 1x3.

Put it horizontally to the right of the previous piece.

Collect the following 2 pieces:

1 medium stone grey plate 2x2 with ball socket and cross hole,

and 1 white rounded plate 1x2.

Put the plate 2x2 on the 2 middle rows, starting from the right edge, ball socket overhanging to the right.

Put the rounded plate 1x2 vertically to the left of the previous piece.

Find 2 bright red low bricks 1x1x⅔.

Put them next to each other on the 2 middle knobs of the rightmost column. This means they will sit on the right column of the plate 2x2 with ball socket.

Collect the following 2 pieces:

1 bright red brick 2x2,

and 1 beige low brick 2x2x⅔ with side grooves.

Put the low brick 2x2 to the left of the 2 previous pieces.

Put the brick 2x2 to the left of the previous piece.

Collect the following 2 pieces:

1 medium azure blue plate 2x3,

and 1 bright red stepped plate 2x2 with 2 side knobs.

Put the plate 2x3 horizontally to the left of the previous piece.

Put the stepped plate 2x2 to the left of the previous piece, side knobs to the left.

Find 1 black plate 2x4.

Put the black plate 2x4 horizontally on the 2 previous pieces. Make sure to leave the leftmost column of the stepped plate empty.

Collect the following 2 pieces:

1 dark stone grey brick 1x2 with downward half arch,

and 1 dark stone grey flat tile 1x4.

Put the flat tile 1x4 horizontally on the frontmost row, starting from the left edge.

Put the brick 1x2 horizontally to the right of the previous piece, downward arch to the left.

Find 1 dark stone grey brick 1x3.

Put it horizontally to the right of the previous piece.

Find 2 white rounded plates 1x2.

Put 1 horizontally on the right and middle knob of the previous piece.

Repeat symmetrically at the back.

Find 2 dark stone grey inverted roof tiles 1x2, 45°.

Put 1 horizontally to the right of the previous piece, slope overhanging to the right.

Repeat symmetrically at the front.

Find 1 bright red plate 2x2 with 2 knobs.

Put it on the 2 middle rows, starting from the right edge, its 2 knobs forming a column on the right edge.

Find 2 bright red curve tiles 1x4.

Put 1 horizontally on the backmost row on top of the rounded plate 1x2 to fully cover it. If done correctly, the rightmost knob of the backmost row remains empty for now.

Repeat symmetrically at the front.

Collect the following 2 pieces:

1 dark stone grey seat 2x2x2,

and 1 black and bright red small steering wheel with plate 1x2.

Put the seat 2x2x2 between the left halves of the 2 previous pieces, seatback to the right. This means it will sit to the left of the plate 2x2 with 2 knobs.

Put the small steering wheel vertically to the left of the previous piece, steering wheel to the right.

Next, we will build 2 rear mudguards.

Find 2 bright red stepped mudguard plates 1x6 with 6 knobs.

Put them horizontally next to each other on the table, mudguard screens to the front.

Find 4 bright red one-stepped curve tiles 1x2.

Put 1 horizontally on the 2 rightmost knobs of a mudguard plate, curve to the right.

Put 1 on the 2 leftmost knobs of the same mudguard plate, curve to the left.

Repeat with the 2 remaining pieces on the second mudguard plate.

The 2 rear mudguards are finished! Well done! Mount 1 horizontally on the backmost row, starting from the right edge, mudguard screen to the back. This means it will cover the curve tile 1x4.

Repeat symmetrically at the front.

Find 2 black bricks 1x2 with 2 side knobs.

Put 1 horizontally to the left of the steering wheel's back half, side knobs to the back.

Put the other one horizontally in front of the previous piece, side knobs to the front.

Find 1 bright red brick 2x2.

Put it to the left of the 2 previous pieces.

Find 2 bright red low bricks 1x1x⅔.

Put them to the left of the previous piece. This means they will sit on the leftmost column of the structure.

Find 2 bright red plates 1x1 with double knob collar.

Put 1 on the previous piece that is more towards the back, knob collar to the back.

Put the other one in front of the previous piece, knob collar to the front.

Collect the following 2 pieces:

1 black plate 1x2 with upward hook on long side,

and 1 black plate 1x2.

Put the plate with upward hook horizontally to the right of the steering wheel's front half, upward hook to the front.

Put the plate 1x2 horizontally behind the previous piece.

Find 2 black plates 1x2.

Put 1 horizontally to the left of the previous piece.

Put the other one horizontally in front of the previous piece.

Collect the following 2 pieces:

1 bright red flat tile 2x3,

and 1 bright red one-stepped curve tile 2x2.

Put the flat tile 2x3 horizontally to the left of the steering wheel.

Put the curve tile 2x2 to the left of the previous piece, curve to the left.

Collect the following 2 pieces:

1 black narrow tube 2m with short shaft, (2m means that this piece is about 2 knobs long)

and 1 bright red roof tile with lattice 1x2x⅔.

Hold the roof tile with lattice horizontally, higher edge on the right, and then flip it towards you so that the sloped surface is facing you.

Mount it on the 2 side knobs below the hook on the front side surface.

Turn the narrow tube so that its short shaft is pointing to the top, and put it on the upward hook. This is the exhaust pipe of the tractor!

Collect the following 3 pieces:

2 transparent round plates 1x1,

and 1 bright red flat tile 2x2. (This piece is printed.)

Put 1 round plate 1x1 upright on the double knob collar at the back, using the knob that is pointing to the left.

Repeat symmetrically at the front. These are the tractor's headlights!

Put the flat tile 2x2 on the 2 side knobs pointing to the left at the bottom of the left side surface. Make sure that it's the lower half of the flat tile that connects to the 2 knobs.

This tile is printed with the black radiator grille of the tractor. It consists of two grilles with 6 horizontal slats each. They are surrounded by a frame with rounded corners and connected by a middle strut.

Find 1 bright red roof tile with lattice 1x2x⅔.

Turn the structure around so that the 3 previous pieces are now towards the right. Make sure the structure is still oriented horizontally.

Hold the roof tile with lattice horizontally, its highest edge on the left, and then flip it towards you so that the sloped surface is facing you.

Mount it on the 2 side knobs pointing towards you.

Next, we will assemble the 4 wheels.

Collect the following 8 pieces:

4 white wide rims with hole and spokes,

2 black wide off-road tires, (These tires are the slightly larger ones)

and 2 black wide rubber tires with high profile. (These tires are a bit smaller.)

Put the rims into the tires.

The 4 wheels are finished! Mount the 2 larger tires on the 2 connectors in the left half of the build, spokes turned inward. This means they should be mounted underneath the 2 mudguards we have built.

Mount the 2 smaller tires on the 2 connectors in the right half of the build, spokes again turned inward.

The Tractor is finished! Great job! You can seat the farmer in the driver's seat if you like and take your new vehicle for a test drive!

With this, we have finished building everything from bag 1. Well done! We usually pack a few extra bricks and pieces that you don't need for this build, so if you still have some pieces left there is no need to worry that you missed something. If you like, you can take a break now and return to the instructions later by skipping to the section introducing bag 2. If you want to continue building right away, simply move on to the next sentence.

Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Daughter Minifigure, the farm animal, the animal food and the trailer.

Next, we will build the Daughter Minifigure.

Collect the following 2 pieces:

1 earth blue pair of kid's legs,

and 1 aqua blue, dark azure blue and bright yellow upper part of the body.

Put the upper body on the legs. Make sure that hands and toes are pointing in the same direction.

Collect the following 2 pieces:

1 lemon yellow hairpiece with side parting and ponytail,

and 1 bright yellow Minifigure head.

Put the head on the body.

Put the hair on the head.

The Daughter Minifigure is finished! Well done! She is wearing blue pants and a blue checkered button-down shirt with collar. She is wearing a hearing aid in her left ear! The girl has a very happy face, she is positively beaming and laughing. Let's find her some friends!

Next up, we will build 2 hay bales.

Collect the following 4 pieces:

2 beige low bricks 2x2x⅔ with side grooves,

and 2 beige plates 2x2 with 1 knob.

Put the 2 low bricks next to each other on the table.

Put one plate on top of each low brick.

The 2 hay bales are finished! Well done! You can use them later as food for your farm animals.

Next, we will build the basket of carrots.

Collect the following 6 pieces:

3 bright orange carrots,

and 3 bright green shafts 2m with twig leaves.

Insert one shaft with twig leaves into one carrot, twig leaves protruding to the top.

Repeat with the 4 remaining pieces to assemble 2 more carrots.

Find 1 medium nougat brown crate 3x4 with handholds.

Put the carrots into the crate.

The basket of carrots is finished! Well done! The carrots are particularly delicious treats for your furry friends.

Collect the following 4 pieces:

1 white lamb,

1 medium nougat brown puppy dog,

and 2 white and black sheep.

Finally, we have found our farm animals! The puppy is a brown dog with a black snout. Its ears are pointy, so it could be a German shepherd.

The adult sheep have black legs and faces, even their ears are pitch black! But their wool is all white and fluffy.

The little lamb is completely white, only its eyes are black.

Now, we will build the Trailer.

Collect the following 2 pieces:

1 reddish brown plate 4x8,

and 1 medium stone grey plate 2x3.

Put the plate 4x8 horizontally on the table.

Put the plate 2x3 horizontally on the 2 middle rows, starting from the right edge.

Find 2 bright yellow plates 2x4.

Put 1 horizontally to the left of the previous piece on the 2 back rows. This means that the leftmost column remains empty for now.

Put the other one horizontally in front of the previous piece.

Find 2 black bottom angle plates 1x2 - 2x2 with 4 side knobs.

Put 1 horizontally on the backmost row, starting from the right edge, side knobs to the back.

Repeat symmetrically at the front, side knobs to the front.

Find 1 reddish brown plate 2x4 with 2 knobs.

Put it vertically on the 2 previous pieces, this means on the 2 rightmost columns.

Find 2 black bottom angle plates 1x6 - 2x6 with 12 side knobs.

Put 1 horizontally on the frontmost row, starting from the left edge, side knobs to the front.

Repeat symmetrically at the back, side knobs to the back.

Find 3 reddish brown flat tiles 1x4.

Put 1 vertically to the left of the plate 2x4 with 2 knobs that is mounted on the rightmost edge.

Put another 1 vertically to the left of the previous piece.

Put the last one vertically to the left of the previous piece.

Find 1 reddish brown plate 2x4 with 2 knobs.

Put it vertically to the left of the previous piece.

Find 1 medium stone grey brick 1x2 with technic hole.

Put it vertically centered to the left of the previous piece.

Find 2 medium stone grey low bricks 1x1x⅔.

Put 1 behind the previous piece and the other one in front of the previous piece.

Find 1 medium stone grey plate 1x4.

Put it vertically on top of the 3 previous pieces.

Find 1 dark stone grey connector peg with ball shaft 3m.

Insert the connector peg into the hole on the left side surface, ball shaft protruding to the left.

Find 2 reddish brown flat tiles 1x8.

Put 1 upright horizontally on the bottom row of side knobs pointing to the front.

Put the other one upright horizontally above the previous piece.

Find another 2 reddish brown flat tiles 1x8.

Before you mount them, turn the trailer structure around so that the ball shaft is now pointing to the right.

Mount the 2 flat tiles 1x8 on the side knobs pointing towards you, one on the bottom row and the other one on the top row of side knobs.

Find 1 medium stone grey plate 1x4.

Before you mount it, flip the trailer structure upside down. Make sure to keep the horizontal orientation with the ball shaft pointing to the right.

Put the plate 1x4 vertically on the rightmost edge.

Find 1 dark stone grey brick 2x6.

Put it horizontally centered to the left of the previous piece. This means it sits on the 2 middle rows.

Find 2 black bearing elements 2x2 with 2 side connectors.

Put 1 on the left edge of the previous piece, connectors pointing to the front and back.

Repeat symmetrically on the right edge of the brick 2x6.

Next, we will build 4 wheels.

Collect the following 8 pieces:

4 medium stone grey small rims with side groove and middle hole,

and 4 black rubber tires with staggered low profile.

Put the rims into the tires.

Mount the 4 wheels on the 4 connectors of the trailer structure.

The Trailer is finished! Well done! To hitch the trailer on the tractor, snap the ball shaft of the trailer on the ball cup at the rear end of the tractor.

You have finished building the entire set! Well done! Hitch the trailer to the tractor, load your carrot basket, hay bales and shovel, and off you go! The sheep are looking forward to tasty snacks and friendly pets. Your puppy will help the farmer and his daughter keep the sheep safe.

Enjoy!