LEGO 60451 Emergency Ambulance
LEGO Audio & Braille Building Instructions for the LEGO City set "Emergency Ambulance".
If you would like to access the help menu to find out how to use and navigate these instructions, tap with two fingers or press key "H".
Uh-oh! A fallen skateboarder needs help. Join the medic and race to the scene aboard the emergency ambulance. This vehicle doesn’t just look awesome – it’s loaded with cool features. Fold up the side panels and open the rear doors to access the onboard stretcher and medical equipment. Exciting rescue adventures await in LEGO City!
The box cover shows the Emergency Ambulance front and center during a rescue operation. The vehicle is a big van with a turquoise undercarriage and a white vehicle body. Its rear doors are open but the interior is not visible from this angle. The large side hatch is printed with a turquoise Star of Life, a symbol often used by medical emergency services. The Emergency Ambulance is parked in the middle of a skatepark. The medic is busy pushing the stretcher out of the halfpipe towards the rear of the vehicle. The skateboarder is sitting on the stretcher. She is wearing a plaster cast on her right arm! Seems like her last trick didn't go too well. Luckily, the ambulance came to her rescue. The medic will provide first aid and, if necessary, take her to the hospital. Now, let's start building!
Open the box. It contains 2 booklets with visual building instructions, 2 numbered bags and 1 loose piece: 1 car underbody 4x14x1. We will refer to the bag numbers to guide you through the building process. Please ask a sighted person to help you identify the correct bags!
Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Medic Minifigure and the first half of the Emergency Ambulance with undercarriage, wheels and driver's cabin.
If you like, you can ask a sighted person to sort the pieces by color before you start building. We recommend using trays or bowls. This can make finding the correct pieces easier! However, if you would like to build without brick colors entirely, you can also ignore them or turn them off. There are different ways to sort and organize the bricks and your building process. It is up to you!
First, we will build the Medic Minifigure.
Collect the following 2 pieces:
1 vibrant yellow, teal blue and black upper part of the body,
and 1 teal blue pair of legs.
Put the upper body on the legs.
Collect the following 2 pieces:
1 black hairpiece with short straight hair,
and 1 bright yellow Minifigure head.
Put the head on the body.
Put the hair on the head.
The Medic Minifigure is finished! Well done! He is wearing a teal blue uniform. The trousers have reflective stripes on the knees and 2 large pockets. The jacket also has reflective stripes on the chest and shoulder parts. Its lower and side patches are neon yellow. It also has 2 large front pockets. Medics have a lot of equipment they need to carry around with them, so pockets are essential! The back of the jacket is printed with a turquoise Star of Life, a symbol often used by medical emergency services. It is a star-shaped icon with 6 rays that have blunt ends. In its middle, there is a rod of Asclepius. The Medic Minifigure has a three-day stubble, and the look on his face is a no-nonsense kind of expression. He has to deal with a lot of difficult situations in his work day, but he can take it! Let's continue building now.
Next, we will build the first half of the Emergency Ambulance.
Collect the following 5 pieces:
1 black vehicle underbody 4x14x1, (This piece was loose in the box)
and 4 beige connector pegs 2m with cross axle pin. (2m means that each of these pieces is about 2 knobs long.)
Put the vehicle underbody horizontally on the table. Make sure its knobs form straight rows and columns in front of you.
Insert 1 cross axle pin from the front into the right cross hole on the front side surface of the car underbody. The connector peg will protrude to the front.
Repeat symmetrically on the left.
Repeat with the 2 remaining cross axle pins on the back side surface.
Find 2 white plates 1x6.
Put 1 horizontally centered on the frontmost row of the car underbody. This means it will sit in the slightly lower section of that row.
Repeat symmetrically at the back.
Find 1 baby blue plate 2x4.
Put it horizontally on the 2 middle rows, starting from the second column from the right. This means that the rightmost column should remain empty for now.
Next, we will build the vehicle rear with rear lights.
Collect the following 2 pieces:
1 teal blue plate 2x6,
and 1 silver metallic grille tile 1x2.
Put the plate 2x6 vertically on the table.
Put the grille tile 1x2 vertically centered on the right column.
Collect the following 4 pieces:
2 teal blue bricks 1x2,
and 2 teal blue inverted roof tiles 2x2, 45°.
Put 1 inverted roof tile 2x2 on the right column behind the previous piece, 1/2 and curve overhanging to the right.
Put 1 brick 1x2 vertically to the left of the previous piece.
Repeat symmetrically at the front with the 2 remaining pieces.
Find 1 medium stone grey brick 2x6.
Put it horizontally centered on the left column, 5 columns overhanging to the left. This means it will be mounted to the left of the grille tile.
Find 2 black plates 2x3.
Put 1 vertically on the back half of the second and third column from the right.
Put the other one vertically in front of the previous piece.
Find 2 transparent red plates 1x2.
Put 1 vertically on the back part of the rightmost column.
Repeat symmetrically at the front.
Collect the following 3 pieces:
2 vibrant yellow flat tiles 1x6,
and 1 teal blue flat tile 1x6.
Put 1 vibrant yellow flat tile 1x6 vertically on top of the 2 previous pieces. This means that it will cover the rightmost column.
Put the teal blue flat tile 1x6 vertically to the left of the previous piece.
Put the other vibrant yellow flat tile 1x6 vertically to the left of the previous piece.
The vehicle rear with rear lights is finished! Well done! Mount it in its building orientation coming from the right in the middle recess of the car underbody. Insert the overhanging 5 columns fully into the recess, vehicle rear protruding to the right. If done correctly, its left edge will be flush with the left edge of the plate 2x4 that we have mounted in the recess earlier.
Collect the following 2 pieces:
1 transparent red plate 1x2,
and 1 baby blue plate 2x4.
Put the plate 1x2 vertically on the rightmost column of knobs of the vehicle rear sub-build.
Put the plate 2x4 horizontally to the left of the previous piece. If done correctly, its left edge is flush with the left edge of the vehicle rear sub-build.
Find 2 teal blue mudguard elements 2x4x2.
Put 1 horizontally on the backmost row, starting from the right edge, 1 row and mudguard overhanging to the back.
Repeat symmetrically at the front.
Collect the following 3 pieces:
1 dark stone grey plate 2x4 with 2 knobs,
1 teal blue flat tile 1x6,
and 1 vibrant yellow flat tile 1x6.
Put the teal blue flat tile 1x6 vertically on the rightmost column of knobs. This means it will sit to the left of the 3 identically shaped pieces that are part of the vehicle rear.
Put the plate 2x4 with 2 knobs vertically centered to the left of the previous piece.
Put the vibrant yellow flat tile 1x6 vertically to the left of the previous piece.
Next, we will build 2 side panels.
Collect the following 4 pieces:
2 teal blue plates 2x6,
and 2 teal blue bricks 1x6.
Put 1 brick 1x6 horizontally on the table.
Put 1 plate 2x6 horizontally on top, 1 row overhanging to the front.
Repeat with the 2 remaining pieces.
Mount 1 side panel horizontally on the backmost row directly to the left of the mudguard element. Make sure to only use the protruding row of the side panel, back row with brick overhanging to the back.
Repeat symmetrically at the front, back row with brick overhanging to the front.
Find 4 black plates 2x3.
Put them horizontally next to each other on top of the front side panel we have just mounted.
Repeat symmetrically at the back.
Collect the following 3 pieces:
1 vibrant yellow flat tile 1x6,
and 2 teal blue flat tiles 1x6.
Put 1 teal blue flat tile 1x6 vertically on the column to the left of the mudguard elements. This means it will sit directly to the left of the last flat tile 1x6 we have mounted previously.
Put the vibrant yellow flat tile 1x6 vertically to the left of the previous piece.
Put the other teal blue flat tile 1x6 vertically to the left of the previous piece.
Collect the following 3 pieces:
2 teal blue mudguard elements 2x4x2,
and 1 purple violet brick 1x2.
Put 1 mudguard element horizontally on the frontmost row, starting from the left edge, 1 row and mudguard overhanging to the front.
Repeat symmetrically at the back.
Put the brick 1x2 vertically centered on the leftmost column.
Collect the following 7 pieces:
4 vibrant yellow plates 1x2,
2 teal blue flat tiles 1x6,
and 1 dark stone grey plate 2x4 with 2 knobs.
Put 1 plate 1x2 vertically on the 2 backmost rows, directly to the left of the last flat tile 1x6 we have mounted. In other words, it should sit on the seventh column from the left.
Repeat symmetrically at the front.
Put 1 flat tile 1x6 vertically to the left of the 2 previous pieces.
Put 1 plate 1x2 vertically to the left of the previous piece on the 2 backmost rows.
Repeat symmetrically at the front.
Put the other flat tile 1x6 vertically to the left of the 2 previous pieces.
Put the plate 2x4 vertically centered to the left of the previous piece. If done correctly, it will sit centered on the 2 mudguard elements.
Find 1 teal blue top angle plate 1x2 - 2x6 with 12 side knobs.
Put it vertically centered on the leftmost column, 12 side knobs pointing to the left.
Next, we will build the front bumper with headlights.
Collect the following 2 pieces:
1 baby blue plate 2x4,
and 1 black ingot 1x2.
Put the plate 2x4 horizontally on the table.
Put the ingot 1x2 horizontally centered on the back row.
Collect the following 3 pieces:
2 transparent blue round tiles 1x1,
and 1 teal blue plate 1x4 with 2 knobs.
Put 1 round tile 1x1 to the left of the previous piece and the other round tile 1x1 to its right.
Put the plate 1x4 horizontally on the front row.
The front bumper with headlights is finished! Great job! Flip it upright and mount it horizontally centered on the side knobs pointing to the left. Make sure that there are 2 empty side knobs behind it and 2 empty side knobs in front of it.
Find 2 teal blue smooth roof tiles 1x2x⅔.
Flip 1 upright vertically and mount it on the 2 side knobs in front of the front bumper. If done correctly, the slope should run from the front right towards the back left.
Repeat symmetrically at the back, slope running from the back right towards the front left.
Next, we will build a panel with turn signal lights.
Collect the following 2 pieces:
1 teal blue plate 1x4 with 2 knobs,
and 1 vibrant yellow plate 2x6 with 2 rounded corners.
Put the plate 2x6 with 2 rounded corners vertically on the table, rounded corners to the left.
Put the plate 1x4 vertically centered on the right column.
Find 1 black rounded plate 1x4.
Put it vertically on the left column.
Collect the following 2 pieces:
1 transparent flat tile 1x2 with cut-off corner on the right, (To make sure you have the correct piece, put it vertically in front of you, narrow tip pointing towards you. Now, the cut-off corner should be on the right. If it is on the left, you have the mirrored part.)
and 1 transparent flat tile 1x2 with cut-off corner on the left. (If you put it vertically in front of you, narrow tip pointing towards you, the cut-off corner should be on the left.)
Put the flat tile 1x2 with cut-off corner on the right horizontally on the frontmost knob, long edge at the back, cut-off corner on the front left. The cut-off corner should match the shape of the plate below.
Repeat symmetrically at the back.
The panel with turn signal lights is finished! Well done! Mount it vertically on the leftmost column. Its left half will not connect to any knobs but rest on the top edge of the front bumper sub-build.
Find 1 black plate 6x6.
Put it to the right of the panel with turn-signal lights that we have just mounted.
Find 1 white plate 1x6.
Put it vertically on the previous piece's rightmost column.
Find 2 white plates 1x6.
Put 1 vertically on the leftmost column of the plate 6x6. This means it will be mounted directly to the right of the panel with turn-signal lights.
Put the other one vertically to the right of the previous piece.
Collect the following 2 pieces:
1 white right door 1x3, (If you put it horizontally in front of you, panel side towards you, its round brick 1x1 should be on the right.)
and 1 white left door 1x3. (This is the mirrored version of the right door.)
Put the right door 1x3 horizontally on the backmost row, directly to the right of the previous piece, panel side towards the back.
Repeat symmetrically on the frontmost row. If done correctly, the round bricks of the doors are both on the left.
Collect the following 3 pieces:
1 transparent red plate 1x2,
and 2 white plates 2x2.
Put 1 plate 2x2 on the front edge of the 2 vertically mounted plates 1x6 that are located directly to the left of the previous piece.
Put the plate 1x2 vertically behind the previous piece's right column.
Put the other plate 2x2 behind the previous piece on the same 2 columns as the first plate 2x2.
Find 1 medium stone grey smooth roof tile 1x2x⅔. (This piece is printed.)
Put it vertically on top of the plate 1x2 of the previous step, slope to the right.
This piece is printed with the dashboard of the vehicle. It consists of a black oval-shaped area with the speed indicator dial on the bottom left and the tachometer on the bottom right. The fuel indicator is at the top in the middle of the dashboard.
Find 2 black plates 1x2 with hinge stub on short side.
Put 1 vertically behind the previous piece, hinge stub overhanging to the back.
Repeat symmetrically at the front.
Find 1 black and medium stone grey small steering wheel with plate 1x2.
Put it vertically to the right of the roof tile with dashboard print, steering wheel to the right.
Find 1 white one-stepped curve tile 2x3.
Put it horizontally to the left of the dashboard, curve to the left. If done correctly, its leftmost edge is flush with the left edge of the vehicle.
Collect the following 2 pieces:
1 white two-stepped curve tile 2x3 with angled cut to the left, (If you put this part vertically in front of you, narrow tip pointing towards you, the cut should run from the front right to the left back.)
and 1 white two-stepped curve tile 2x3 with angled cut to the right. (This is the mirrored version of the first piece.)
Put the curve tile with angled cut to the left horizontally behind the previous piece, longest edge towards the front, curve to the left.
Repeat symmetrically at the front.
Collect the following 2 pieces:
1 transparent light blue windscreen 6x3x2,
and 1 white wall element 1x6x3 with 2 top knobs.
Put the windscreen vertically above the dashboard and the steering wheel so that its leftmost edge rests on the right edge of the three curve tiles, slope towards the left. This means its leftmost edge will not connect to any knobs.
Put the wall element vertically on the plate 1x6 to the right of the 2 doors, panel side towards the right.
Find 2 transparent blue round tiles 1x1.
Put them on the 2 top knobs of the windscreen. Careful, do not put them on the wall element we have just mounted.
Next, we will build the roof panel of the driver's cab.
Collect the following 2 pieces:
1 white hood plate 4x6x⅔ with 2 angled corners and 4 knobs,
and 1 flame yellowish orange plate 1x4.
Put the hood plate vertically on the table, its 4 knobs forming a column on the right.
Put the plate 1x4 vertically on the 4 knobs.
Collect the following 3 pieces:
2 white one-stepped quarter-circle curve tiles 2x2,
and 1 white one-stepped curve tile 2x2. (This piece is printed.)
Put the printed curve tile 2x2 on the 2 middle knobs, curve to the left. Its left half will not connect to any knobs.
This tile is printed with a turquoise Star of Life.
Put one quarter-circle curve tile behind the previous piece, outer corner pointing to the front right. This piece will only connect to 1 knob.
Repeat symmetrically at the front.
Find 1 black rounded plate 1x4.
Put it vertically centered underneath the leftmost edge of the hood plate.
The roof panel of the driver's cab is finished! Great job! Mount it in its building orientation on top of the windscreen and wall element to finish the driver's cabin.
Next, we will assemble the 4 wheels.
Collect the following 8 pieces:
4 titanium metallic and black high-gloss racing tires with low profile,
and 4 black curved disks 2x2 with 1 knob.
Put 1 tire flat on the table.
Put 1 curved disk on top of the tire rim, its outer edge bulging down. If the disk cannot be fitted on the tire that way, turn the tire upside down and try on its other side.
Repeat with the other tires and disks.
Snap the 4 wheels on the 4 connectors on the vehicle underbody that are pointing to the front and back, curved disks pointing outwards.
The first half of the Emergency Ambulance is finished! Great job! To seat the Medic Minifigure in the driver's seat, take off the roof panel, bend the Minifigure's legs into a sitting position, and put it behind the steering wheel. Reattach the roof and off you go!
With this, we have finished building everything from bag 1. Well done! We usually pack a few extra bricks and pieces, so if you still have some pieces left there is no need to worry that you forgot something. If you like, you can take a break now and return later by skipping to the section introducing bag 2. If you want to continue building right away, simply move on to the next sentence.
Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Skateboarder Minifigure, the skate ramp and the second half of the Emergency Ambulance.
Next up, we will build the Skateboarder Minifigure.
Collect the following 2 pieces:
1 medium lilac and bright yellow upper part of the body,
and 1 dark stone grey pair of legs.
Put the upper body on the legs. Make sure that hands and toes are pointing in the same direction. The elbows should point to the back.
Collect the following 2 pieces:
1 beige and reddish orange helmet with long hair,
and 1 bright yellow Minifigure head.
Put the head on the body.
Put the helmet with long hair on the head.
Find 1 white bandage cast.
If you like, you can already snap it onto the Skateboarder's right hand. You can also keep it for later when everything is finished and the medic actually puts on the cast.
Next, we will build the Skateboard.
Collect the following 3 pieces:
1 medium lilac skateboard top with 4 wheel clasps,
and 2 black small wheel axles.
Hold the skateboard horizontally. Snap 1 wheel axle vertically into the wheel clasps on the left and repeat symmetrically on the right.
The Skateboard is finished! Great job! You can put the Minifigure on the 2 top knobs of the skateboard and take it for a spin!
The Skateboarder Minifigure is finished! Great job! She is wearing grey pants with a yellow fabric belt and a zip-up jacket in darker and lighter shades of lilac. She has a daring grin on her face and seems to fear nothing! However, sometimes even the best skaters fall and, if they're out of luck, get hurt. So be careful!
Next up, we will build the skate ramp.
Collect the following 2 pieces:
1 dark green plate 2x4,
and 1 black handrail 1x4x2.
Put the plate 2x4 vertically on the table.
Put the handrail horizontally on the backmost row.
Find 2 medium stone grey one-stepped curve tiles 2x3.
Put 1 horizontally in front of the previous piece on the right column, 2/3 and curve overhanging to the right.
Put the other one horizontally to the left of the previous piece, 2/3 and curve overhanging to the left.
Now, we will build a small flower.
Collect the following 2 pieces:
1 bright red flower piece 1x1 with through-hole,
and 1 mossy green round plate 1x1 with 3 small leaves.
Put the flower piece 1x1 on the round plate with leaves.
The small flower is finished! Mount it on the front left knob of the skate ramp, 3 leaves pointing to the front.
The skate ramp is finished! Well done! The skateboarder can try her tricks on the ramp, and maybe she can even do a rail slide. It's for you to find out!
Now, we will build the second half of the Emergency Ambulance.
Collect the following 2 pieces:
1 black plate 6x10,
and 1 white brick 1x2x2.
Put the plate 6x10 horizontally on the table.
Put the brick 1x2x2 vertically on the leftmost column, starting from the back edge.
Find 1 white brick 1x2x2.
Put it vertically on the leftmost column on its frontmost edge.
Find 2 white panel elements 1x2x1.
Put one horizontally on the frontmost row to the right of the previous piece, panel to the back.
Repeat symmetrically at the back, panel to the front.
Find 4 white grille tiles 1x2.
Put 2 horizontally next to each other to the right of the previous piece. This means they will sit on the backmost row.
Repeat symmetrically at the front.
Find 2 white panel elements 1x2x1.
Put 1 horizontally to the right of the previous piece, panel to the back.
Repeat symmetrically at the back, panel to the front.
Find 1 medium stone grey brick 2x2x3.
Put it centered on the 2 leftmost columns. This means it will sit between the 2 bricks 1x2x2.
Collect the following 3 pieces:
2 white bricks 1x2x2,
and 1 teal blue brick 1x2.
Put the brick 1x2 vertically on the previous piece's left column.
Put 1 brick 1x2x2 vertically behind the previous piece.
Repeat symmetrically at the front.
Find 2 medium stone grey bricks 1x1 with horizontal side clasp.
Put them on the second column from the left, using the 2 empty knobs of the brick 2x2x3. Make sure the clasps are pointing to the front and back.
Collect the following 2 pieces:
1 white plate 1x6,
and 1 transparent yellow plate 1x2.
Put the plate 1x6 vertically on the leftmost column.
Put the plate 1x2 vertically centered to the right of the previous piece.
Find 1 baby blue injection syringe.
Hold it upside down so that the syringe tip is pointing to the bottom. Snap its middle part into the clasp pointing to the back.
Next, we will build the first-aid box.
Collect the following 2 pieces:
1 bright red plate 1x2 with handle on long side,
and 1 white flat tile 1x2. (This piece is printed.)
Put the plate with side handle vertically on the table, handle to the left.
Put the flat tile 1x2 vertically on top. It is printed with a turquoise Star of Life, just like the back of the Medic's jacket. However, this one does not have a rod of Asclepius.
The first-aid box is finished! Flip it upright, smooth side towards you, and snap the handle into the clasp pointing to the front. Make sure the first-aid box is extending towards the right. If done correctly, it is mounted upright and not flat at the top surface of the structure.
Collect the following 2 pieces:
1 sand blue window frame 1x4x4,
and 1 white plate 1x4 with 2 knobs.
Put the window frame vertically centered on the second column from the right. This means it will sit between the 2 rightmost panel elements 1x2x1.
Put the plate 1x4 vertically on top of the previous piece.
Collect the following 2 pieces:
1 white left door with knob hinge 1x3x4, (If you put it horizontally in front of you, panel side facing you, the knob hinge should be on the left.)
and 1 white right door with knob hinge 1x3x4. (This is the mirrored version of the left door.)
Put the left door with knob hinge vertically on the rightmost column, panel side with handle to the right. If done correctly, its knob hinge is on the frontmost knob of that column.
Put the right door vertically behind the previous piece, panel to the right, knob hinge on the backmost knob of this column.
Find 1 white plate 1x6.
Put it vertically on top of the 2 previous pieces.
Find 1 medium stone grey plate 4x10.
Put it horizontally centered on top of the entire build. There will be 2 empty singular knobs in front of it and 2 empty singular knobs behind it.
This plate is the base of the roof panel of this part of the ambulance.
Collect the following 4 pieces:
2 transparent blue flat tiles 1x2,
and 2 black flat tiles 2x4.
Put 1 flat tile 1x2 vertically centered on the previous piece's rightmost column.
Put 1 flat tile 2x4 horizontally to the left of the previous piece.
Put the other flat tile 2x4 horizontally to the left of the previous piece.
Put the other flat tile 1x2 vertically to the left of the previous piece.
Collect the following 6 pieces:
2 black plates 1x6,
and 4 black plates 1x1 with vertical side clasp.
Put 1 plate 1x6 horizontally centered on the row behind the 4 previous pieces. There should be 2 empty knobs to its left and 2 empty knobs to its right.
Put 1 plate 1x1 to the right of the previous piece, clasp pointing to the back.
Repeat symmetrically on the left.
Repeat this symmetrically at the front with the 3 remaining pieces.
Collect the following 6 pieces:
4 vibrant yellow one-stepped curve tiles 1x2,
and 2 vibrant yellow flat tiles 1x6.
Put 1 curve tile 1x2 horizontally on the backmost row of the roof panel, starting from the left edge, curve to the left.
Put 1 flat tile 1x6 horizontally to the right of the previous piece.
Put 1 curve tile 1x2 horizontally to the right of the previous piece, curve to the right.
Repeat symmetrically at the front with the 3 remaining pieces.
Find 4 transparent blue smooth roof tiles 1x1x⅔.
Put 1 on the left knob in front of the roof panel, slope to the front.
Repeat symmetrically on the right.
Repeat symmetrically at the back with the 2 remaining pieces, slopes to the back.
Next, we will build 2 side hatches.
Find 2 black plates 4x5 with side plate 1x2 with shafts.
Put them vertically next to each other on the table, side plates with shafts at the back edge.
Collect the following 4 pieces:
2 white flat tiles 4x4, (These tiles are printed)
and 2 white flat tiles 2x4.
Put 1 flat tile 2x4 vertically on the 2 left columns of one plate 4x5, leaving the frontmost row and the side plate with shafts empty for now.
Put 1 flat tile 4x4 to the right of the previous piece, 1/2 overhanging to the right.
This tile is again printed with a turquoise Star of Life, the symbol for medical emergency services.
Repeat with the 2 remaining pieces on the second plate 4x5.
Find another 2 black plates 4x5 with side plate 1x2 with shafts.
Put 1 vertically underneath the overhang of one side hatch, side plate 1x2 with shafts to the back. Make sure the long edges of the plates 4x5 are aligned.
Repeat with the other plate 4x5 on the second side hatch.
Find 2 white flat tiles 2x4.
Put 1 vertically on the 2 rightmost columns of one side hatch, directly to the right of the flat tile 4x4.
Repeat with the remaining piece on the second side hatch.
Find 4 white plates 1x4 with 2 knobs.
Put 2 horizontally next to each other on the frontmost row of one side hatch.
Repeat with the 2 remaining pieces on the second side hatch.
Find 2 white grille tiles 1x2.
Put 1 horizontally centered on the frontmost row. This means it will cover the 2 adjacent knobs of the 2 previous pieces.
Repeat with the other grille tile on the second side hatch.
The 2 side hatches are finished! Well done! Flip 1 upright, side plates with shafts to the top, and snap the outer ends of the shafts into the 2 clasps pointing towards the front on the roof panel.
Repeat symmetrically at the back. You can later fold the hatches up or down as needed, but for now, let's keep them closed.
Now, we will assemble the stretcher.
Find 1 white stretcher 2x6 with 2 long side shafts 8m.
Put it aside for now.
Find 2 teal blue plates 1x2.
Before you mount them, flip the stretcher upside down so that its knobs touch the table and turn it horizontally.
Put 1 plate vertically on the leftmost edge and the other one vertically on the rightmost edge.
Find 2 black plates 1x2 with 2 bottom hinge stubs.
Put them vertically on top of the 2 previous pieces.
The stretcher is finished! Well done! Flip it right side up again. Open the back doors and insert the stretcher into the vehicle interior. Close the back doors afterwards.
The second half of the Emergency Ambulance is finished! Well done! Mount it horizontally on the bed of the first half of the vehicle. The ambulance is now ready for operation. Any accident or emergency call can now be taken care of. Put the driver behind the steering wheel and wait for your first call! The skateboarder might need your help already.