LEGO 60362 Car Wash
LEGO Audio & Braille Building Instructions for the LEGO City set "Car Wash".
Head over the LEGO City Car Wash. Drive through to activate the spinning washer brushes. Tip the dispenser to sprinkle the car with soapsuds. Then position the fans to dry your vehicle before driving round to top up your tire pressure at the pump. Washing your car has never been so much fun!
The box cover shows a busy scene in LEGO City on a sunny day. In the background, there are some skyscrapers and office buildings of LEGO City and a blue sky with plane trails and a few clouds. Featured in the center of the cover is the LEGO City Car Wash Station: it's a compact structure in white, light and dark blue; it has 2 side walls with large windows and a roof connecting them. The entrance and exit are open, but there are signal lights to let you know if you can enter or you need to wait. On the roof, there is a big "CAR WASH" sign with white and blue bubbles – you cannot miss it! Behind that, the drying fans and soap dispensers are mounted. The car wash has three flexible rotating brushes in light blue to accommodate vehicles of different sizes. On the right side of the car wash, the tire pressure pump with gauge is mounted. It is equipped with a grey pressure tank! The yellow and green car is currently being washed, the top and side brushes are in full swing and there are soap bubbles everywhere! To the left of the car wash, the car driver is having a chat with the car mechanic while she's waiting for the car wash to finish. Let's get going!
Open the box. This can be tricky; ask someone to help you!
The box contains 2 booklets with visual building instructions, 3 bags with numbers printed on them, and a small sheet with stickers. Ask a sighted person to help you find the correct bag!
Open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Car and the Car Driver Minifigure.
Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!
First, we will build the Car Driver Minifigure.
Collect the following 2 pieces:
1 baby blue and bright yellow upper part of the body,
and 1 baby blue pair of legs.
Put the upper part of the body on top of the legs.
Collect the following 2 pieces:
1 bright yellow Minifigure head,
and 1 lemon yellow hairpiece with long wavy hair and side parting.
Put the head on the body.
Put the hair on the head. Her hair is so long that it parts to the front and back over her right shoulder.
The Car Driver Minifigure is finished! Great job! She is wearing light blue pants and a light blue sleeveless top with a pineapple print. The top ends slightly above the waistband and has a small knot at the bottom. The Car Driver is smiling, she is wearing some mascara and frosted pink lipstick. Let's go build her a car!
Next, we will build the Car.
Collect the following 2 pieces:
1 dark stone grey chassis plate 2x12 with thicker middle part 4x4x⅔,
and 1 dark azure blue plate 2x4.
Put the chassis plate 2x12 horizontally on the table.
Put the plate 2x4 horizontally into the recess in the middle of the previous piece.
Find 2 medium stone grey plates 2x3 with half circle and hole.
Flip the chassis plate upside down so that its knobs touch the table. Make sure to keep the horizontal orientation.
Put 1 horizontally on the right extension of the chassis plate, half circle to the right. Make sure its right edge is flush with the right edge of the chassis plate.
Repeat symmetrically on the left, half circle to the left.
Find 2 bright red bearing plates 2x2 with 2 small connector pins.
Put 1 vertically on the previous piece, leaving the half circle empty, connectors to the front and back.
Repeat symmetrically on the right, connectors to the front and back.
Find 2 bright red plates 1x2.
First, flip the structure right side up again, keeping the horizontal orientation.
Put 1 vertically on the rightmost column.
Repeat symmetrically on the left.
Collect the following 2 pieces:
1 dark azure blue tile 1x2 with angled top handle,
and 1 black and medium stone grey small steering wheel with plate 1x2.
Put the tile with top handle vertically on the fourth column from the left, slope to the right.
This will be the seatback of the car!
Put the small steering wheel 1x2 vertically on the fourth column from the right, steering wheel to the left.
Next up, let's make 2 side parts of the car body.
Collect the following 4 pieces:
2 bright yellowish green plates 1x4,
and 2 dark green inverted double roof tiles 1x6x1, 45°.
Put 1 inverted roof tile horizontally on the table, slopes to the left and right.
Put 1 plate 1x4 horizontally centered on the lower level of the previous piece.
Repeat with the other 2 pieces: put the other inverted roof tile horizontally on the table, and put the plate 1x4 horizontally centered on top.
The 2 side parts of the car body are finished! Mount 1 horizontally on the 4 frontmost knobs of the thicker middle part, slopes overhanging to the left and right.
Repeat symmetrically on the backmost 4 knobs, slopes to the left and right.
Find 2 bright yellow panel elements 1x4x1 with panel on long side.
Put 1 horizontally centered on the previous piece, side panel to the back.
Repeat symmetrically at the front, side panel to the front.
These two panels will be the door panels of the car!
Find 2 dark stone grey stepped bricks 2x2 with short round mudguard.
Put 1 horizontally to the left of the seatback on the back row, mudguard to the back.
If done correctly, the mudguard symmetrically arches over the connector pin pointing to the back.
Repeat symmetrically at the front.
Find 1 mud grey plate 2x2 with 1 knob.
Put it centered on top of the 2 previous pieces to connect them.
Find 2 dark green plates 1x3.
Put 1 horizontally on the row behind the previous piece. Make sure its left edge is flush with the edge of the previous piece, meaning that its rightmost knob connects to the side body part we have mounted earlier.
Repeat symmetrically at the front.
Now, we will build the rear end of the car with license plate.
Collect the following 3 pieces:
2 transparent red smooth roof tiles 1x1x⅔,
and 1 dark green stepped brick 1x4x1⅔ with cut-out 1x2 and 6 side knobs.
Put the stepped brick flat on the table, the 6 side knobs pointing to the top, and the other 2 knobs pointing to the back.
Put 1 roof tile on the rightmost knob of the back row, slope to the right. Note that this knob is on a slightly lower level.
Put the other roof tile on the leftmost knob of the back row, slope to the left. Again, this knob is on a lower level.
Collect the following 2 pieces:
1 black flat tile 1x2,
and 1 rectangular sticker 1x2 (number 2). (This is the smaller sticker of the 2 available stickers. You can also skip the sticker for now and apply it later, or ask a sighted person for help if you're not sure.)
Put the flat tile 1x2 horizontally on the table.
Put the rectangular sticker 1x2 on top. It is a white sticker with the license number of the car in black letters: M E 6 0 3 6 2. Ask a sighted person for help if you want to confirm the correct orientation of the sticker.
Mount this piece horizontally between the 2 roof tiles 1x1 from the previous step.
The rear end of the car with license plate is finished! Well done! To mount it, flip it upright so that its 2 singular knobs are pointing to the top again and the license plate and remaining side knobs are pointing to the left. Mount it vertically centered on the leftmost column of the car structure.
Next, we will assemble the rear bumper.
Collect the following 2 pieces:
1 medium stone grey curve tile 1x4,
and 1 dark stone grey plate 1x2 with shaft on long side.
Put the plate with side shaft horizontally on the table, shaft to the front.
Put the curve tile 1x4 horizontally centered on top. It will fully cover the plate itself.
Flip the rear bumper upright and mount it horizontally on the 2 side knobs at the bottom of the rear end of the car. Make sure the shaft is pointing towards the bottom.
Collect the following 3 pieces:
1 bright yellow plate 1x2 with side rail,
and 2 bright yellow plates 1x4.
Put the plate 1x2 vertically centered on the leftmost column, side rail to the left.
Put 1 plate 1x4 horizontally behind the previous piece on the backmost row.
Repeat symmetrically at the front.
Find 2 dark stone grey stepped bricks 2x2 with short round mudguard.
Put 1 horizontally on the back row in the right edge half of the structure, but leave the rightmost knob empty, mudguard to the back.
Repeat symmetrically at the front.
Collect the following 3 pieces:
2 dark green plates 1x3,
and 1 medium azure blue plate 2x2.
Put the plate 2x2 centered on the 2 previous pieces to connect them.
Put 1 plate 1x3 horizontally behind the previous piece on the back row. Make sure its right edge and the right edge of the previous piece are flush.
Repeat symmetrically at the front.
Now, let's build the front of the car.
Collect the following 3 pieces:
1 dark green stepped brick 1x4x1⅔ with 1x2 cut-out and 6 side knobs,
and 2 transparent brown round tiles 1x1.
Put the stepped brick 1x2 flat on the table, 6 side knobs pointing to the top, the remaining 2 knobs pointing to the back.
Put 1 round tile 1x1 on the rightmost knob of the back row (this knob is on a slightly lower level) .
Repeat symmetrically on the left.
Find 1 silver metallic grille tile 1x2.
Put it horizontally between the two previous pieces.
The front of the car is finished! Great job! Before you mount it, turn the car structure from left to right. This means that now, the rear end of the car with license plate is pointing to the right.
Flip the car front upright so that its 2 singular knobs are pointing to the top again, and the grille tile, round tiles and remaining side knobs are pointing to the left. Mount it vertically centered on the leftmost column, grille tile and remaining side knobs pointing to the left.
Now, we will build the front bumper.
Collect the following 2 pieces:
1 medium stone grey curve tile 1x4,
and 1 dark stone grey plate 1x2 with shaft on long side.
Put the plate with side shaft horizontally on the table, shaft to the front.
Put the curve tile 1x4 horizontally on top.
Mount the front bumper horizontally centered on the 2 remaining side knobs pointing to the left, shaft towards the bottom.
Collect the following 3 pieces:
2 black plates 1x2 with hinge stub on long side,
and 1 bright red plate 1x2.
Put 1 plate 1x2 with hinge stub on the front row to the left of the door panel, hinge stub to the front.
If done correctly, there is 1 empty knob to the left of this piece.
Repeat symmetrically at the back, hinge stub to the back.
Put the plate 1x2 vertically between the left knobs of the 2 previous pieces.
Find 1 bright yellow flat tile 2x4.
Put it vertically centered to the left of the previous piece.
This will be the hood of the car!
Find 2 transparent brown windscreens 4x3x1⅓.
Put 1 vertically to the right of the previous piece, slope to the left.
Put the other one vertically on the right edge, slope to the right.
Find 1 bright yellow curve plate 4x6x⅔ with 4 knobs.
Put it horizontally on the 2 windscreens to connect them. This is the removable roof of the car.
Next, we will assemble the 4 wheels.
Collect the following 8 pieces:
4 black wide balloon tires with profile,
and 4 medium stone grey wide rims with cross hole.
Put the rims in the tires.
The 4 wheels are finished! Well done! Snap them on the connector pins at the bottom of the car.
The Car is finished! Well done! It is time to take it for a test drive, don't you think? You need to get a car dirty before you take it to the car wash after all! Take off the roof of the car, put the driver in the driver's seat and off you go!
Next, we will build the tire pressure pump with pressure gauge.
Collect the following 3 pieces:
1 bright green plate 2x6 with 2 rounded corners,
and 2 dark stone grey bricks 1x2 with side connector.
Put the plate 2x6 horizontally on the table, rounded corners to the front.
Put 1 brick 1x2 on the back row, skipping the leftmost knob, connector to the back.
Put the other brick 1x2 to the right of the previous piece, leaving the rightmost knob empty, connector to the back.
Collect the following 2 pieces:
1 medium stone grey profile brick 1x2, (A profile brick has fine horizontal grooves on one side and vertical grooves on the other side.)
and 1 reddish brown palisade brick 1x2. (A palisade brick has slightly rounded sides with 2 indentations in the middle.)
Put the profile brick 1x2 horizontally in front of the previous piece, horizontal grooves to the front.
Put the palisade brick 1x2 horizontally to the left of the previous piece.
Find another medium stone grey profile brick 1x2.
Put it horizontally behind the other profile brick from the previous step, this time vertical grooves to the front.
Next, we will assemble the air pump needle and tire pressure gauge.
Collect the following 2 pieces:
1 white brick 1x2 with 2 side knobs on long side,
and 1 black shaft 2m with middle stop. (2m means that this piece is about 2 knobs long.)
Put the brick 1x2 horizontally on the table, side knobs to the front.
Insert one end of the shaft into the right side knob from the front. Half of the shaft will stick out towards the front. This is the pump needle.
Find 1 medium stone grey round tile 1x1. (This piece is printed.)
Put it upright on the left side knob. It is printed with a black tire pressure gauge with a red needle. The pressure spectrum is shown in white, blue, and red stripes.
The air pump needle with tire pressure gauge is finished! Mount it horizontally on the right half of the front row, gauge and needle pointing to the front.
Find 1 mud grey plate 2x2 with 1 knob.
Put it on the 4 knobs to the left of the previous piece.
Now, we will make a small flower.
Collect the following 2 pieces:
1 dark green round plate 1x1 with 3 leaves,
and 1 lemon yellow flower piece 1x1 with through-hole.
Put the round plate with leaves on the table.
Put the flower piece 1x1 on top.
Put the flower on top of the plate 2x2 we have mounted in the previous step.
Now, we will build the pressure tank.
Collect the following 2 pieces:
1 medium azure blue plate 2x2,
and 1 earth blue plate 2x2.
Put the earth blue plate 2x2 on the table.
Put the medium azure blue plate 2x2 on top.
Find 1 medium stone grey round brick 2x2 with top cross hole.
Put it on top of the previous piece.
Collect the following 2 pieces:
1 white round plate 2x2,
and 1 medium stone grey round tile 2x2.
Put the round plate 2x2 on top of the previous piece.
Put the round tile 2x2 on top.
The pressure tank is finished! Mount it on the right half of the structure above the air pump needle with gauge.
The tire pressure pump with pressure gauge is finished! Great job! It is an independent build for now. You will later be able to attach it to the car wash structure if you want. Why don't you try to measure and adjust the tire pressure of your car?
Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Car Mechanic Minifigure, and the floor of the Car Wash Station with side washer brushes.
Next up, we will build the Car Mechanic Minifigure.
Collect the following 2 pieces:
1 white and bright yellow upper part of the body,
and 1 bright blue pair of legs.
Put the upper part of the body on the legs.
Collect the following 2 pieces:
1 bright blue billed cap,
and 1 bright yellow Minifigure head.
Put the head on the body.
Put the cap on the head.
Find 1 reddish brown Minifigure broom.
Snap it into the right hand of the mechanic.
The Car Mechanic Minifigure is finished! Well done! The mechanic is wearing glasses, and there are a few specs of dirt on his face. He also has a three-day beard: The mechanic is a busy guy! But the smile on his face shows that he really likes his job and is looking forward to the next customer. He is wearing blue overalls with a chest pocket and a plain white shirt with long sleeves.
Next, we will build the floor of the Car Wash Station.
Collect the following 3 pieces:
1 medium stone grey plate 8x16x⅔ with 6 recesses on the edges,
and 2 earth blue bricks 2x2.
Put the plate 8x16 horizontally on the table.
Put 1 brick 2x2 in the left back corner.
Put the other brick 2x2 in the right back corner.
Find 2 white bricks 1x4 with 3 technic holes.
Put 1 vertically on the rightmost column directly in front of the previous piece.
Repeat symmetrically on the left.
Find 4 black grille tiles 1x2.
Put 2 vertically to the right of the previous piece in one line.
Repeat symmetrically on the right.
Collect the following 4 pieces:
2 medium azure blue plates 1x4,
and 2 earth blue bricks 1x2.
Put 1 plate 1x4 vertically to the right of the 2 previous pieces on the rightmost column.
Put 1 brick 1x2 horizontally in front of the previous piece. This means it will sit on the second row from the front, starting from the right edge.
Repeat symmetrically on the left with the other plate 1x4 and the other brick 1x2.
Find 2 earth blue smooth roof tiles 1x2x⅔.
Put them horizontally in front of the 2 bricks 1x2 we mounted in the previous step, slopes to the front.
If done correctly, they will sit on the frontmost row, on the left and right edge respectively.
Collect the following 5 pieces:
4 dark stone grey flat tiles 2x4,
and 1 medium stone grey round tile 2x2. (This piece is printed.)
Put 1 flat tile 2x4 vertically to the right of the 2 grille tiles mounted in the left half of the structure.
Put 1 flat tile 2x4 vertically to the right of the previous piece.
Repeat symmetrically with the other 2 flat tiles 2x4 in the right half of the structure.
Put the round tile 2x2 in the very center of the base plate. If done correctly, there will be 3 empty rows towards the front and 3 empty rows towards the back, and 1 empty column on the left and right sides each to the flat tiles we have just mounted.
The round tile is printed with a manhole cover. It covers the drain that you need for discharging all the water and soap used in the car wash!
Find 8 dark stone grey two-stepped curve tiles 2x4.
Put 4 of them vertically in front of the 4 flat tiles 2x4 from the previous step, curves to the front. Their steps at the bottom fit the shape of the base plate perfectly.
Repeat symmetrically at the back.
If done correctly, the 4 flat tiles 2x4 and the 8 curve tiles form 2 smooth surfaces. They are the ramps that ensure safe entry and exit for the cars to be cleaned. They also ensure that the car is slightly heightened and the underbody can be properly cleaned and excess water can run off.
Next, we will build 2 mounts for the side brushes.
Collect the following 4 pieces:
2 bright red cross axles 2m with 2 grooves,
and 2 black bricks 1x1 with side cross hole.
Put the 2 bricks 1x1 next to each other on the table, cross holes running from left to right.
Insert the cross axles into the cross holes coming from the left. Make sure that they do not stick out on the right side of the brick.
Find 2 black technic rubber bands with 2 cross holes.
Hold 1 upright vertically, cross holes running from left to right. Now, pick up one of the bricks with cross axle.
Put the top cross hole of the rubber band on the cross axle from the left.
Repeat with the second rubber band and brick with cross axle.
The 2 mounts for the side brushes are finished! Mount 1 on the rightmost column on the second knob from the front, rubber band overhanging to the left and towards the bottom.
Repeat symmetrically on the left, rubber band to the right and towards the bottom.
Now, we will build the 2 side washer brushes.
Let's start with one. The two brushes are identical, so you can either build the second one in parallel already, or do it separately after building the first one.
Collect the following 2 pieces:
1 bright yellow cross axle 3m,
and 1 bright red angled bushing 1m with cross axle extension 1m.
Hold the angled bushing so that the round bushing hole is running from top to bottom and the cross axle extension is towards the left.
Insert the cross axle into the cross axle extension coming from the left, two thirds of the axle sticking out towards the left.
Find 1 white cross bushing 1x½.
Put it on the cross axle from the left and push it all the way in.
Find another white cross bushing 1x½.
Put it on the cross axle from the left and push it all the way in.
Find 1 dark stone grey cross axle 4m with end stop.
Insert it into the round bushing hole from the bottom and push it all the way up. This is a loose connection, so make sure the cross axle doesn't fall out.
Find 1 medium azure blue brush element 2x3x3.
Put it on the previous piece from the top and make sure the cross axle is still pushed all the way up. If done correctly, a small piece of the top cross axle is still sticking out towards the top.
Find 1 white cross bushing 1x½.
Put it on the cross axle from the top, holding the brush in place.
The first side brush is finished! Before we mount it, let's make the second one. If you have already built the second brush as well, you can skip the next 7 prompts.
Collect the following 7 pieces:
1 bright red angled bushing 1m with cross axle extension 1m,
1 dark stone grey cross axle 4m with end stop,
1 medium azure blue brush element 2x3x3,
3 white cross bushings 1x½,
And 1 bright red cross axle 3m.
You can try to build the second brush from memory, or skip back to the previous section called "Now, we will build the 2 side washer brushes" to receive detailed instructions again. Once you have finished both brushes, continue with the instructions.
Now, let's mount the two side brushes. Insert the cross axle that is pointing to the left into the empty cross hole of the rubber band in the left half of the structure.
Repeat with the brush and brush mount on the right side. Thanks to the rubber bands, the brushes move flexibly back and forth to properly clean the car tires!
Find 2 earth blue bricks 1x2.
Put 1 horizontally on the frontmost row, starting from the right edge.
Repeat symmetrically on the left.
Collect the following 4 pieces:
2 medium azure blue bricks 1x2,
and 2 medium azure blue bricks 1x1.
Put 1 brick 1x2 vertically on the leftmost column, starting from the front.
Put 1 brick 1x1 to the right of the previous piece next to its front knob.
Repeat symmetrically on the right with the two remaining pieces.
You have finished building the car wash floor with side brushes. Fantastic work! Let's continue and build the rest!
Open bag number 3. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the entry signal lights, car wash side walls and windows, and the top brush.
Now, we will build the entry signal lights.
Collect the following 2 pieces:
1 white brick 1x2 with 2 side knobs on long side,
and 1 transparent green round tile 1x1.
Put the brick 1x2 horizontally on the table, side knobs to the front.
Put the round tile 1x1 upright on the right side knob.
Find 1 transparent red round tile 1x1.
Put it upright on the left side knob.
Mount the entry signal lights horizontally on the frontmost knobs of the 2 rightmost columns, round tiles to the front.
Find 1 white brick 1x2 with horizontal clasp on long side.
Mount it horizontally at the leftmost edge on the 2 frontmost knobs there, clasp to the front.
Find 4 white inverted roof tiles 1x2x3, 74°.
Put 1 vertically on the left knob of the previous piece, slope to the front.
Put 1 vertically to the right of the previous piece, slope to the front.
Repeat symmetrically on the right with the 2 remaining pieces, slope to the front again.
Find 2 white bricks 1x1x3.
Before you mount them, turn the structure left to right so that the four pieces we have just mounted in the previous step are at the back.
Put 1 brick 1x1x3 on the leftmost column directly in front of the inverted roof tile.
Repeat symmetrically on the right.
Remember these two bricks. We will later mount the top washer brush on them.
Next, we build the top washer brush.
Collect the following 2 pieces:
1 black cross axle 10m,
and 1 bright red angled bushing 1m with cross axle extension 1m.
Hold the angled bushing so that the round bushing hole is running from top to bottom and the cross axle extension is pointing to the left.
Insert the cross axle from the left into the cross axle extension.
Find 1 white cross bushing 1x½.
Put it on the cross axle from the left and push it all the way in.
Find 1 medium azure blue brush element 2x3x3.
Put it on the cross axle from the left and push it all the way in.
Find another 2 medium azure blue brush elements 2x3x3.
Put them on the cross axle, pushing them all the way in.
Find 1 white cross bushing 1x½.
Put it on the cross axle and push it all the way in, locking in the brush elements.
Find 1 bright red angled bushing 1m with cross axle extension 1m.
Make sure that its round bushing hole is running top to bottom and put the cross axle extension on the remaining part of the cross axle from the left.
Before you continue, make sure once again that both round bushing holes are running from top to bottom. If they don't, you might have to take them off and adjust accordingly.
Find 2 bright blue connector pegs 3m with asymmetric ring stopper.
Insert the shorter end of one connector peg from the top into the right bushing hole. The longer part of the connector will stick out to the top.
Repeat symmetrically on the round bushing hole on the left.
Find 2 bright red technic bushings 1m.
Put them on the 2 previous pieces from the top and push them down.
Find 2 bright red angled bushings 1m with cross axle extension 1m.
Hold 1 so that the round bushing hole is running from top to bottom and the cross axle extension is pointing to the left.
Now, put the round bushing hole around the connector pointing to the top on the left side, cross axle extension pointing to the left.
Repeat symmetrically on the right, cross axle extension pointing to the right.
If done correctly, the two cross axles extensions we have just mounted are pointing outwards to the left and right, not inwards.
Find 2 pale ocher yellow connector pegs 2m with cross axle pin.
Insert the cross axle pins of those pieces into the cross axle extensions pointing to the left and right, connectors sticking out towards the left and right.
Find 2 white bricks 1x1 with technic hole.
Hold one so that its side hole is running from left to right.
Mount it on the connector peg sticking out towards the right by inserting it into the hole of the brick.
Repeat symmetrically on the left with the second brick.
The top washer brush is finished! Well done! To mount it, put the bricks 1x1 of the previous step on the 2 bricks 1x1x3 we have mounted previously.
Now, we will build the side windows of the car wash station.
Collect the following 4 pieces:
2 black door frames 1x4x6,
and 2 transparent light blue glasses for frame 1x4x6.
Assembling windows and doors can be a bit tricky. You can ask for help if you want, but first let's give it a try.
Put 1 door frame flat on the table, top knobs pointing to the back. Make sure the inner grooves and notches are at the top.
The glass has small bumps on its corners. Snap the glass into the door frame using those bumps and the corresponding notches on the door frame.
Repeat to make the second window.
The side windows of the car wash are finished! Great job! Mount 1 vertically on the leftmost column, directly in front of the mounting location of the top brush, glass to the left.
Repeat symmetrically on the right, glass to the right.
Now, we will build the rear pillars of the car wash.
Collect the following 4 pieces:
2 white bricks 1x2x5,
and 2 medium azure blue bricks 1x2.
Put the 2 bricks 1x2 horizontally next to each other on the table.
Put the 2 bricks 1x2x5 horizontally on top of the two previous pieces.
Mount 1 rear pillar horizontally at the leftmost edge on the two frontmost knobs there.
Repeat symmetrically on the right.
Find 2 medium azure blue plates 2x8.
Put 1 vertically on the 2 leftmost columns to cover the left wall of the car wash.
Repeat symmetrically on the right.
Find 4 earth blue plates 2x2 with 1 knob.
Put 1 on the front edge of the previous piece and another 1 on the back edge of the previous piece.
Repeat symmetrically on the left.
Find 2 earth blue flat tiles 2x4.
Put 1 vertically between the 2 previous pieces.
Repeat symmetrically on the right.
Open bag number 4. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the car wash roof with drying fans, soap dispensers and car wash sign.
Next, we will build the roof of the car wash station.
Collect the following 3 pieces:
2 white plates 2x16,
and 1 medium azure blue plate 2x8.
Put 1 plate 2x16 horizontally on the table.
Put the plate 2x8 vertically on the 2 rightmost columns, 6 rows overhanging to the front.
Put the other plate 2x16 horizontally underneath the 2 frontmost rows of the previous piece, 14 rows protruding to the left.
Find another medium azure blue plate 2x8.
Put it vertically on the 2 leftmost columns of the plates 2x16, connecting them like the plate 2x8 from the previous step.
Find 2 white plates 2x4.
Before you mount them, flip the plate structure upside down, keeping the horizontal orientation.
Put 1 plate 2x4 vertically centered on the 2 rightmost columns.
Repeat symmetrically on the left.
Collect the following 3 pieces:
2 medium azure blue flat tiles 1x6,
and 1 dark stone grey plate 1x12.
First, flip the structure right side up again, keeping the horizontal orientation.
Put 1 flat tile 1x6 horizontally on the backmost row, leaving the 2 leftmost knobs empty.
Put the other flat tile 1x6 horizontally to the right of the previous piece, leaving the 2 rightmost knobs of the back row empty.
Put the plate 1x12 horizontally in front of the 2 previous pieces.
Find 2 black bottom angle plates 1x2 - 2x2 with 4 side knobs.
Put 1 horizontally on the 2 rightmost knobs of the previous piece, 4 side knobs to the back.
Put the other one horizontally on the 2 leftmost knobs of the plate 1x12, 4 side knobs to the back.
Collect the following 3 pieces:
2 medium stone grey curve tiles 1x4,
and 1 medium azure blue flat tile 1x6.
Put 1 tile 1x4 horizontally on top of the previous piece, locking it in on the structure.
Repeat symmetrically on the right.
Put the flat tile 1x6 horizontally between the 2 previous pieces.
Find 2 black roof tiles 2x2, 45°.
Put 1 in the front left corner of the structure, slope to the left.
Put the other one in the front right corner, slope to the right.
Next, we will build the drying fan holders.
Collect the following 4 pieces:
2 dark stone grey bricks 2x2 with side connector and top cross hole,
and 2 black plates 2x2 with 1 knob.
Put the 2 bricks next to each other on the table, connectors pointing to the front.
Put the 2 plates with 1 knob on top of the 2 bricks.
Find 2 dark stone grey round tiles 2x2 with middle hole. (These pieces are printed.)
Put them on top of the 2 previous pieces. These tiles are printed with grey cooling fans with 12 lamellas each.
The drying fan holders are finished! Well done! Mount one to the left of the last piece we have mounted (roof tile 2x2 in the front right corner) connector pointing to the front.
Repeat symmetrically on the left with the second drying fan holder, connector to the front.
Now, we will build the first of two soap dispensers.
Collect the following 2 pieces:
1 dark stone grey brick 2x2 with side connector and top cross hole,
and 1 black plate 2x2 with 1 knob.
Put the brick 2x2 on the table, connector pointing to the left.
Put the plate 2x2 on top.
Find 1 medium stone grey plate 2x4 with center bottom tube.
Hold it vertically, tube at the bottom, and insert the connector into the tube coming from the right.
Find 1 black grille tile 1x2.
Put it horizontally on the backmost row of the previous piece. Careful, the previous piece is movable, so this will be quite wobbly.
Find 2 medium azure blue panel elements 1x2x1 with panel on long side.
Put 1 vertically in front of the previous piece on the right column, panel to the right.
Put the other one vertically to the left of the previous piece, panel to the left.
Find 1 medium azure blue panel element 1x2x1 with back and side panels.
Put it horizontally on the frontmost row, longest panel to the front.
The first soap dispenser is finished! Well done! Mount it in the building orientation horizontally on the 2 frontmost rows, to the left of the right fan holder.
The soap dispenser is movable! We will fill it with soapsuds later. For now, make sure that the dispenser box is overhanging towards the front and tilted to the bottom.
Next, we will build the second soap dispenser.
Collect the following 2 pieces:
1 dark stone grey brick 2x2 with side connector and top cross hole,
and 1 black plate 2x2 with 1 knob.
Put the brick 2x2 on the table, connector to the right.
Put the plate 2x2 on top.
Find 1 medium stone grey plate 2x4 with center bottom tube.
Hold it vertically, tube to the bottom, and insert the connector of the brick 2x2 into the tube coming from the left.
Find 1 black grille tile 1x2.
Put it horizontally on the 2 backmost knobs of the previous piece.
Find 2 medium azure blue panel elements 1x2x1 with panel on long side.
Put 1 vertically in front of the previous piece on the left column, panel to the left.
Put the other one vertically to the right of the previous piece, panel to the right.
Find 1 medium azure blue panel element 1x2x1 with back and side panels.
Put it horizontally in front of the two previous pieces, longest panel to the front.
The second soap dispenser is finished! Well done! Mount it horizontally to the left of the first dispenser, dispenser box overhanging to the front.
Now, we assemble the drying fans.
Collect the following 4 pieces:
2 medium stone grey technic cylinders 4x4 with center bar,
and 2 bright yellow connector pegs 2m with middle ring.
Put 1 technic cylinder on the table. Make sure the rounded side of the center bar is towards the bottom.
Insert 1 connector peg from the top into the round hole in the middle of the center bar, one half sticking out towards the top.
Repeat with the other technic cylinder and the other connector peg.
Find 2 black propellers with 3 blades and round hole.
Put them on the 2 connector pegs of the previous step by inserting the connector pegs into the holes of the propellers.
The drying fans are finished! To mount them, flip them upside down so that the propellers are towards the bottom. Insert the connectors on the roof that are pointing to the front into the side holes of the drying fans.
Now, we will build the car wash sign.
Collect the following 2 pieces:
1 medium stone grey plate 2x12,
and 1 black plate 2x2 with 1 knob.
Put the plate 2x12 horizontally on the table.
Put the plate 2x2 on the four rightmost knobs.
Find 3 black plates 2x2 with 1 knob.
Put one to the left of the previous piece.
Put the other two next to each other on the left edge of the plate 2x12, mirroring the two previous pieces.
Collect the following 2 pieces:
1 black plate 4x4 with 4 knobs on one edge,
and 1 rectangular sticker 3x4. (This is the larger sticker of the two available stickers.)
Put the plate 4x4 on the table, edge with for knobs to the front.
Put the rectangular sticker 3x4 on the smooth surface behind the 4 knobs. Ask a sighted person for help if you want to confirm the correct orientation of the sticker.
The sticker has the words "CAR WASH" in all caps on it. The letters are light blue with a white outline, and they are surrounded by white and light blue soap bubbles. Above the writing, there is a small image of a red car. The background of the sticker is black.
Mount this piece in the middle of the plate 2x12, edge with knobs to the front, 2 rows overhanging to the back.
Find 2 white round plates 2x2.
Put 1 on the knob to the left of the previous piece, and the other one on the knob to its right.
Find 2 white round tiles 3x3.
Put 1 to the right of the previous piece, making sure that it is overhanging a bit to the right and to the back but not protruding at the front edge.
Repeat symmetrically on the left, again making sure that it is overhanging a bit to the left and to the back but not at the front edge.
Find 2 aqua blue round tiles 2x2.
Put 1 on the 2 left knobs of the round plate 2x2 in the left half of the structure. If done correctly, the other half of this piece will rest on the previous piece.
Repeat symmetrically on the right.
Find 4 aqua blue round tiles 1x1.
Put 1 to the left of the previous piece on the front knob of the round plate 2x2.
Put 1 on the rightmost knob of the plate 4x4 with 4 knobs on one edge.
Put 1 on the second knob from the left on the plate 4x4 with 4 knobs on one edge.
Put the last one on the back knob of the plate 2x2 in the left half of the structure.
The car wash sign is finished! Great job! Before you mount it, turn the roof structure left to right so that the drying fans are pointing to the back.
Flip the car wash sign upright so that the plate 4x4 with sticker is pointing to the front and the straight edge is at the bottom. Mount it horizontally centered on the 2 sets of knobs 2x2 pointing to the front.
The roof of the car wash with drying fans and car wash sign are finished! Very well done, that was hard! Before mounting it, turn the car wash station left to right so that the side brushes and enter signal lights are at the front again.
Now, mount the roof horizontally centered on the car wash. Make sure the sign is at the front and the drying fans are at the back.
Find 4 white pieces with 3 ice cream scoops 1x1. (These pieces will be our soapsuds!)
Put them into the 2 soap dispensers on the roof. Before doing so, make sure that they are both tilted down so that the soapsuds don't fall out.
If you want, you can now mount the tire pressure pump with gauge on the right side wall of the car wash. Identify the 2 connectors peg on the pump that are sticking out towards the back; do not confuse them with the shaft sticking out towards the front (this is the pump needle) . Insert the connector pegs into two of the technic holes on the right side wall of the car wash.
You have finished building the entire set! Fantastic job! To give your car its first proper cleaning, make yourself acquainted with the spinning brushes, how they move and how they can be adjusted, and check out the soap dispensers and how to tilt them to shower the car with soapsuds. Once you know your way around the car wash, it's time for the car to approach the ramps, wait for the green light, and go!