LEGO 60292 Town Center 

LEGO Audio & Braille Building Instructions for the LEGO City set "Town Center".

The LEGO City town center is bustling with activity. Shirley Keeper has arrived in her truck to pick up the recycling containers, the police are chasing a crook and a firefighter is battling a blaze at the pizza restaurant. Check out the cool amenities! There's a car wash, EV charging station and a park with a kids' ride. You can even visit a dojo to learn martial arts... awesome!

The box cover shows the whole town center in all its facets. In the very middle is a road junction: one road with two lanes is running from the front left corner towards the back, and a side road (also with two lanes as well as a crosswalk) is crossing in the middle towards the right. The blind townsman with guide dog is actually just crossing the street on the crosswalk, coming from the pizza restaurant called "CITY PIZZA" and martial arts dojo called "DRAGON DOJO" in the right back. It looks like he is headed towards the small park with kids' ride in the front right! Maybe he wants to have a little chat with the townswoman who is sitting on the park bench while her baby is having fun in the ride. To the right of the park, the firefighter motorcycle is parked. Wait, what is it doing there? Oh, the firefighter is actually trying to put out a small fire in the storage shed of the pizza restaurant! Good thing she got there in time! Meanwhile, the pizza chef is handing a pizza box to a child. Oh, this is actually Madison, a keen martial arts student! She probably needs a snack before her lesson in the Dragon Dojo that is located on the first floor above the pizza restaurant. In the very front, the crook is fleeing from the policeman who is following him closely on his police bicycle. It seems like the crook has stolen a pizza! On the left section of the box cover is the car wash with EV charging station. The name of the car wash is "Octan". The electric car, driven by the martial arts instructor, has just been recharged and is now ready to hit the road. Shirley Keeper is standing in the middle of the road; she is busy loading the crane truck with the recycling containers for paper and glass. The recycling container station and the crane truck are at the left back of the box cover, the blue container for paper is currently dangling in midair on the crane arm. Shirley Keeper has it all under control with her remote control. Let's get started!

Open the box. This can be tricky; ask someone to help you!

The box contains a total of 13 plastic bags: 10 plastic bags with numbers on them, and 3 plastic bags without numbers. 1 unnumbered bag contains the 5 booklets with visual building instructions and the sticker sheet. The other 2 unnumbered plastic bags contain the road plates for the town center and other large-sized plates. The 10 plastic bags with numbers contain the other bricks and pieces for building this amazing set. Ask a sighted person to help you find the correct bags when needed!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the firefighter Minifigure, the firefighter motorcycle, the martial arts instructor Minifigure, the electric car, the crook Minifigure, the policeman Minifigure, the police bicycle and the EV charging station. This bag also contains the famous LEGO brick separator. It is a handy tool to separate pieces that you have mounted already. Use it as you see fit.

Additionally, open the two unnumbered bags. They contain road plates and other large plates that you will need throughout the entire build.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we will build the firefighter Minifigure.

Collect the following 2 pieces:

1 black pair of legs,

and 1 black and dark stone grey upper part of the body.

Put the upper body on top of the legs.

Collect the following 2 pieces:

1 white safety helmet,

and 1 bright yellow head.

Put the head on top.

Put the helmet on top.

Find 1 transparent brown helmet visor.

Snap the two small bumps on the inside of the visor into the two notches on the helmet.

The firefighter Minifigure is finished! Great job! The firefighter has a fierce grin on her face. It looks like she is afraid of nothing! There are ash smudges on her face. Her uniform is dark grey with neon green reflective stripes on knees and chest. She is wearing a harness and is equipped with a trigger hook and a gauge.

Next, we will build the firefighter motorcycle.

Find 1 black motorcycle frame.

Put it horizontally on the table, two horizontal forks to the left, the forks that are pointing from top to bottom to the right.

Find 1 bright red motorcycle fairing.

Put it horizontally on top, the 2 top knobs of the fairing on the left.

Find 1 silver metallic handlebar with bottom shaft.

Snap the bottom shaft into the clasp pointing to the top on the right half of the motorcycle.

Continue if you want to decorate this piece with 2 stickers now. If not, skip the next 5 sentences.

Find 1 zig-zag shaped sticker number 12. Ask a sighted person to help you find the correct sticker.

Put it on the front side surface, the sticker form fits the silhouette of the motorcycle fairing.

This sticker is blazing red with a bright yellow print on it: it shows the emblem of the fire brigade which is a bright yellow silhouette of a badge with a bright yellow flame in the center. At the bottom, there is a horizontal bright yellow line with red writing in it: "Fire 0 2". In the top tip of the sticker, there is a small black wing.

Find 1 zig-zag shaped sticker number 11. Ask a sighted person to help you find the correct sticker.

Put it on the back side surface of the motorcycle fairing. It has the same print as the previous sticker.

Now, we will make a small part.

First, turn the motorcycle left to right. This means the handle is now on the left, and the two knobs are on the right.

Collect the following 2 pieces:

1 bright red plate 1x2 with top clasp,

and 1 white round plate 1x1.

Put the plate with clasp horizontally on the table, clasp to the left.

Put the round plate 1x1 on the knob of the previous piece.

Find 1 transparent blue round tile 1x1.

Put it on top of the previous piece.

Mount this part horizontally on the two knobs on the right, clasp to the left.

Now, we will assemble the 2 motorcycle wheels. Let's start with one.

Collect the following 2 pieces:

1 silver metallic motorcycle rim with pins and spokes,

and 1 black motorcycle tire with high profile.

Put the tire around the rim.

Find another rim and another tire.

Assemble the second wheel just like the first one.

Snap the wheel pins into the forks at the bottom of the motorcycle.

Now, let's make the hand-held fire extinguisher.

Collect the following 2 pieces:

1 transparent light blue round plate 1x1,

and 1 white and dark stone grey shooter with shaft, knob and trigger.

Put the round plate 1x1 into the opening at the back of the shooter.

Snap the handle of the fire extinguisher into the clasp on the motorcycle.

The firefighter motorcycle is finished! Well done! Now the firefighter can go on her first mission and take care of some fire hazards!

Next, we build the martial arts instructor Minifigure.

Collect the following 3 pieces:

1 white and earth blue upper part of the body,

1 earth blue and white pair of legs,

and 1 bright yellow head.

Assemble the Minifigure: put the upper body on the legs, and put the head on top.

Find 1 medium stone grey hairpiece with receding hairline and sideburns.

Put it on the head.

The martial arts instructor Minifigure is finished! He has grey hair and a grey jawline beard. His face is very friendly! He is wearing a traditional martial arts uniform: the uniform is white with a brown stomach binder and a dark blue chest shield as well as dark blue thigh protectors. The instructor can practice some of his moves until the martial arts dojo is finished.

Now, we build the electric car.

Collect the following 2 pieces:

1 black car bottom 4x7 with base plate 3x4 and two bearing plates 2x2,

and 1 dark azure blue plate 2x2.

Put the car chassis 4x7 horizontally on the table.

Put the plate 2x2 on the four knobs on the right.

Find 2 dark azure blue plates 1x3.

Put 1 horizontally on the backmost row.

Repeat symmetrically at the front.

Collect the following 2 pieces:

1 black and medium stone grey small steering wheel with plate 1x2,

and 1 dark azure blue plate 2x2.

Put the plate 2x2 on the four knobs on the left.

Put the small steering wheel vertically to the right of the previous piece, steering wheel to the right.

Collect the following 2 pieces:

1 bright blue right door 1x3,

and 1 bright blue left door 1x3.

Put the right door 1x3 horizontally on the backmost row. Make sure the small door handle is pointing to the back, and the top knob of the piece is on the left. If this does not add up, try the other door.

Repeat symmetrically at the front.

Find 2 bright blue mudguard plates 2x4 with middle hole.

Put 1 vertically centered on the two rightmost columns. Centered means that the piece is symmetrically overhanging to the front and back.

Repeat symmetrically on the left.

Collect the following 2 pieces:

1 medium stone grey top angle plate 1x2 - 2x4 with 8 side knobs,

and 1 transparent red plate 1x2.

Put the angle plate vertically centered on the leftmost row, side knobs overhanging to the left.

Put the plate 1x2 vertically centered on the rightmost column.

Collect the following 3 pieces:

2 transparent light blue round plates 1x1,

and 1 bright blue plate 1x2 with 1 knob.

Listen carefully! These pieces will be mounted on the side knobs at the left.

Put 1 round plate 1x1 upright on the upper backmost knob on the left side.

Put the plate 1x2 upright horizontally in front of the previous piece.

Put the other round plate 1x1 upright in front of the previous piece.

Find 1 dark stone grey bow tile 1x4x⅔.

Continue if you want to decorate this piece with the license plate sticker now. If not, skip the next 3 sentences.

Find 1 small rectangular sticker number 7. Ask a sighted person to help you find the correct sticker.

Put it horizontally centered on the bow tile.

The white sticker has a bold black frame. The license number is "M P 6 0 2 9 2 " and is printed on the sticker in bold black letters.

Mount this piece upright horizontally on the lower side knobs on the left side.

Find 1 bright blue flat tile 1x4.

Put it vertically on the leftmost column.

Find 2 transparent brown windscreens 2x4x2.

Put 1 vertically to the right of the previous piece, slope to the left.

Put the other one vertically on the rightmost edge, slope to the right.

Collect the following 2 pieces:

1 bright blue hood plate 4x4x⅔ with 2 angled corner and 2 knobs,

and 1 transparent red plate 1x2.

Put the hood plate on the table, knobs to the right.

Put the plate 1x2 vertically underneath the top knobs of the hood plate.

Mount this part on top of the windscreens, top knobs to the right.

Now, we assemble the 4 electric car wheels. Let's start with one.

Collect the following 2 pieces:

1 medium stone grey small rim with cross hole,

and 1 black small slick rubber tire.

Put the tire around the rim.

Find another 3 rims and another 3 tires.

Assemble the remaining 3 tires just like the first one.

Now, snap all 4 tires onto the pin connectors at the bottom of the car.

The electric car is finished! Well done! You can already take it for a test drive and see how far it can go. Once the car wash with electric vehicle charging station is finished, you can also charge it any time you want!

Next up, we will build the crook Minifigure.

Collect the following 2 pieces:

1 white and bright yellow upper part of the body,

and 1 mud grey pair of legs.

Put the upper body on top of the legs.

Collect the following 2 pieces:

1 dark stone grey short beanie cap,

and 1 bright yellow head.

Put the head on top.

Put the short beanie cap on the head.

Collect the following 2 pieces:

1 bright red Minifigure crowbar,

and 1 white flat tile 2x2. (This piece is printed.)

Put the crowbar in the crook's hand.

Snap the flat tile 2x2 into the other hand. It is printed with a pizza box in the colors of the Italian flag (which consists of a red, a white, and a green horizontal stripe) and with the word "PIZZA" in the middle! What on earth is the crook doing with the pizza? Maybe he is just hungry. Or do you think he might be hiding something in it?

The crook Minifigure is finished! Great job! The crook is wearing grey pants and a white button-down shirt with grey horizontal stripes on it. Looks like this is his prison uniform, because the prisoner number is printed on his right chest. He has a stubble, and a very grim look on his face.

Next, we will build the policeman Minifigure.

Collect the following 3 pieces:

1 earth blue pair of legs,

1 baby blue and bright yellow upper part of the body,

and 1 bright yellow head.

Assemble the Minifigure: put the upper body on top of the legs, and then put the head on top.

Find 1 earth blue racing helmet.

Put it on the head.

The policeman Minifigure is finished! Well done! The policeman has a friendly face and is wearing orange motorcycle goggles. He is wearing dark blue pants and a light blue shirt, as well as a grey utility belt. His badge is pinned onto his left chest, and a radio unit is dangling from his right shoulder.

Next, we will build the police bicycle.

Find 1 earth blue bicycle frame.

Put it horizontally on the table, handle to the left.

Now, we will assemble the 2 bicycle wheels. Let's start with one.

Collect the following 2 pieces:

1 silver metallic motorcycle rim with pins and spokes,

and 1 black motorcycle tire with high profile.

Put the tire around the rim.

Find another rim and another tire. Assemble the second wheel just like the first one.

Now, snap the wheel pins onto the forks of the frame.

The police bicycle is finished! Well done! Now, the policeman can go on his first patrol. Do you think he will catch the crook in the act?

Next, we will start building the car wash with EV charging station and road plates. First up is the EV charging station.

Collect the following 2 pieces:

1 medium stone grey plate 8x8,

and 1 dark stone grey flat tile 1x8.

Put the plate 8x8 on the table so that it forms neat rows and columns in front of you.

Put the flat tile 1x8 horizontally on the backmost row.

Collect the following 2 pieces:

1 dark stone grey flat tile 1x8,

and 1 dark stone grey flat tile 1x4.

Put the flat tile 1x8 horizontally in front of the previous piece.

Put the flat tile 1x4 vertically in front of the previous piece on the leftmost column.

Find 4 dark stone grey flat tiles 2x4.

Put 1 vertically to the right of the previous piece.

Put the other 3 vertically to the right. This means that the last one will have 1 column overhanging to the right.

Collect the following 2 pieces:

1 dark azure blue flat tile 2x4,

and 1 dark azure blue brick 2x4.

Put the flat tile 2x4 horizontally on the 2 frontmost rows, starting from the right edge.

Put the brick 2x4 horizontally to the left.

Collect the following 2 pieces:

1 bright yellow plate 2x2,

and 1 bright yellow plate 2x2 with 2 knobs.

Put the plate 2x2 into the front left corner.

Put the plate 2x2 with 2 knobs to the right of the previous piece, knobs to the right.

If done correctly, there are now two columns with 2 knobs each on the leftmost frontmost edge, one smooth column without knobs to their right, and another column with 2 knobs to the right of that.

Find 1 medium stone grey bottom angle plate 1x2 - 2x2 with 4 side knobs.

Put it vertically on the second column from the left, side knobs to the right.

Find 1 bright yellow one-stepped curve tile 2x2x⅔.

Put it on the previous piece and the leftmost column, curve to the left.

Next, we will build the EV charging display.

Collect the following 2 pieces:

1 bright yellow plate 2x3,

and 1 bright yellow one-stepped curve tile 2x2x⅔.

Put the plate 2x3 horizontally on the table.

Put the one-stepped curve tile on the leftmost column, overhanging to the left, curve to the left.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 square sticker number 8. Ask a sighted person to help you find the correct sticker.

Put it on top of the previous piece.

The sticker is yellow and has a white, blue, and yellow logo for electric vehicle fuel with a thin black frame in the middle. The logo symbol is shaped like a yin and yang with one blue and one yellow drop, and below that a blue and yellow writing says "Octane" with a capital "E" at the end that has a tiny electric plug on its lowest horizontal line.

Collect the following 2 pieces:

1 bright yellow one-stepped curve tile 2x2x⅔,

and 1 medium stone grey flat tile 1x2. (This piece is printed.)

Put the flat tile 1x2 vertically to the right of the previous piece.

This piece is printed with two gauges, three white buttons, one white and one red indicator light and a charging display.

Put the one-stepped curve tile to the right of the previous piece, curve to the right.

The EV charging display is finished! Flip it upright, make sure the sticker is at the top, and mount its 2 lowest rows on the four side knobs of the structure that are pointing to the right.

Find 1 black string 11m with 2 knobs. (This means that the piece is 11 knobs long.)

Mount the 2 knobs on the 2 remaining knobs on the structure. This is the charging cable for electric vehicles.

Find 1 bright yellow round tile 1x1.

Put it on the frontmost knob of the previous piece.

Find 1 dark stone grey plate 16x16x⅔ with 12 cutouts. (This piece is also known as a "road plate".)

First, put it on the table to the right of the structure. Locate the front vertical cutout on the left edge of the road plate.

Put the overhanging column on the structure into said cutout.

The EV charging station is now finished! Great job! Of course we need to build a road before the electric car can drive there for charging. Let's go!

Open bag number 2. This bag contains all bricks and pieces for completing the road plates. All of these pieces are dark stone grey, but some of them have lane markings printed on them. Ask a sighted person to sort the printed and non-printed pieces if you like.

Find 2 dark stone grey curve tiles 5x8x⅔ with protruding row 1x4.

Put 1 horizontally on the front horizontal cutout on the left. Use the protruding row that fits perfectly into the cutout.

Repeat symmetrically on the right.

Find 2 dark stone grey flat tiles 2x4 with print.

Find 4 dark stone grey flat tiles 2x4 without print.

Put the 2 flat tiles with print vertically into the two vertical cutouts in the middle of the plate.

(These pieces are printed with a bold white stripe in the middle. These stripes are the lane markings in the middle of the road.)

Put 2 flat tiles without print horizontally into the two horizontal cutouts in the middle of the plate.

Put the remaining 2 flat tiles without print horizontally into the two cutouts at the back, one row overhanging to the back.

Find 2 dark stone grey flat tiles 1x4.

Put them vertically into the two vertical cutouts on the right side of the plate.

Find 1 dark stone grey plate 16x16x⅔ with 12 cutouts.

Connect it to the 2 overhanging rows at the back by using the two front horizontal cutouts of the new plate.

Find 2 dark stone grey flat tiles 2x4 with print, and 4 dark stone grey flat tiles 2x4 without print.

Put the 2 flat tiles with print vertically into the 2 vertical cutouts in the middle of the new road plate.

Put 2 flat tiles without print horizontally into the 2 horizontal cutouts in the middle of the plate.

Put 2 flat tiles without print horizontally into the 2 cutouts at the back, one row overhanging to the back.

Put the remaining 2 flat tiles without print vertically into the 2 cutouts on the right, one row overhanging to the right.

Find 1 dark stone grey plate 16x16x⅔ with 12 cutouts.

Connect it to the 2 overhanging rows at the back by using its two front cutouts.

Collect the following 5 pieces:

2 dark stone grey flat tiles 2x4 with print, and 2 dark stone grey flat tiles 2x4 without print,

and 1 dark stone grey flat tile 1x4.

Put the 2 flat tiles 2x4 with print vertically into the 2 vertical cutouts in the middle of the new road plate.

Put the 2 flat tiles 2x4 without print horizontally into the two horizontal cutouts in the middle of the plate.

Put the flat tile 1x4 vertically into the backmost vertical cutout on the left side.

Find 2 dark stone grey curve tiles 5x8x⅔ with protruding row 1x4.

Put them horizontally into the 2 cutouts at the back.

Find 2 dark stone grey flat tiles 1x4.

Put them vertically into the 2 backmost vertical cutouts on the right side.

Find 1 dark stone grey plate 8x16x⅔ with 7 cutouts. (This tile is printed.)

Turn it vertically. Locate the 2 overhanging columns 1x4 on the right side of the structure.

Now, mount the left vertical cutouts of the new plate underneath said overhanging columns.

The plate 8x16 is printed with white horizontal stripes. They are the crosswalk of the town center!

Find 2 dark stone grey flat tiles 2x4.

Put them vertically into the 2 vertical cutouts on the rightmost edge, one column overhanging to the right.

Find 1 dark stone grey plate 8x16x⅔ with 7 cutouts. (This piece does not have a print.)

Turn it vertically, and mount the vertical cutouts on its left side underneath the overhanging columns on the rightmost edge of the structure.

Find 2 dark stone grey flat tiles 2x4. (These pieces are printed with lane markings again.)

Put them horizontally into the two horizontal cutouts in the middle of the two previous road plates.

Find 2 dark stone grey curve tiles 5x8x⅔ with protruding row 1x4.

Put them vertically into the vertical cutouts on the rightmost edge of the structure.

The roads of the LEGO City town center are finished! Great job! You can put the road junction and EV charging station aside for now, but keep it close, and keep the current orientation: the long road is running back to front on the left, and the crossing side road with crosswalk is extending towards the right. The EV charging station is at the front left. We will keep adding the different builds as we finish them.

Open bag number 3. You can choose to have the bricks sorted by color again. This bag contains the bricks and pieces for the lower level of the car wash.

Collect the following 3 pieces:

2 dark stone grey corner tiles 2x2,

and 1 medium stone grey plate 16x16.

Put the plate 16x16 on the table. Make sure the knobs form neat rows and columns in front of you.

Put the corner tiles into the leftmost and rightmost corner at the front. Put them so that the corner tiles and the corners of the plate align perfectly.

Find 2 dark stone grey plates 2x3.

Put 1 horizontally on the second row from the front and the second column from the left. This means you fit the corner of the plate neatly into the corner tile on the left.

Repeat symmetrically on the right.

Find 4 dark stone grey grille tiles 1x2.

Put them horizontally on the second row from the front, forming a line between the two previous pieces.

Collect the following 3 pieces:

2 dark stone grey flat tiles 2x4,

and 1 dark stone grey flat tile 1x4.

Put 1 flat tile 2x4 horizontally on the frontmost row on the left edge, one row overhanging to the front.

Put the flat tile 1x4 horizontally on the front row to the right of the previous piece.

Put the other flat tile 2x4 horizontally to the right of the previous piece, one row overhanging to the front.

Collect the following 12 pieces:

6 black flat tiles 2x4,

and 6 bright yellow flat tiles 2x4.

These will be arranged vertically in the middle of the base plate: two vertical black columns in the middle, and one vertical yellow column on each side of the black columns.

Put 1 yellow flat tile vertically on the fifth and sixth column from the left, directly behind the grill tile line.

Put 2 more yellow flat tiles vertically behind the previous piece.

Put 3 black flat tiles vertically to the right of the three previous pieces.

Put another 3 black flat tiles vertically to the right of the three previous pieces.

Put the remaining 3 yellow flat tiles vertically to the right of the three previous pieces.

Collect the following 4 pieces:

2 white plates 1x2 with 1 knob,

and 2 dark stone grey grille tiles 1x2.

Skip 2 columns from the leftmost edge, and put 1 grille tile horizontally on the third row of knobs from the front.

Repeat symmetrically on the right.

Put 1 plate 1x2 with 1 knob horizontally behind the previous piece.

Repeat symmetrically on the left.

Find 6 white flat tiles 2x3.

Put 1 horizontally behind the previous piece. The leftmost column of the structure remains empty.

Put another 2 horizontally behind the previous piece.

Repeat symmetrically on the right with the remaining 3 pieces.

Collect the following 4 pieces:

2 dark stone grey corner tiles 2x2,

and 2 white plates 2x2.

Put the corner tiles into the leftmost and rightmost corner at the back so that the corners align perfectly.

Fit the plates 2x2 into the cutouts of the corner tiles.

Find 5 dark stone grey grille tiles 1x2.

Put them horizontally on the second row from the back so that they form a line between the two previous pieces.

Next, let's make 2 small parts. They will later hold the car wash brushes.

Collect the following 2 pieces:

1 bright red cross axle 2m with 2 grooves (this piece is 2 knobs long),

and 1 dark stone grey t-shaped cross axle joint 2m. (This piece is 2 knobs long)

Put the cross axle joint on the table. The cross hole is pointing towards you, the block-like part is at the back, and the back hole is running top to bottom.

Insert the cross axle front-to-back into the cross hole.

Collect the following 2 pieces:

1 black brick 1x2 with cross hole,

and 1 bright red cross axle 2m with 2 grooves.

Push the brick 1x2 horizontally on the cross axle protruding to the front.

Insert the new cross axle top-to-bottom into the hole at the back.

Let's make another such part: find 1 dark stone grey t-shaped cross axle joint 2m, and 1 bright red cross axle 2m with 2 grooves.

Put the cross axle joint on the table. The cross hole is pointing towards you, the block-like part is at the back, and the back hole is running top to bottom.

Insert the cross axle front-to-back into the cross hole.

Find another black brick 1x2 with cross hole, and another bright red cross axle 2m with 2 grooves.

Push the brick 1x2 horizontally on the cross axle protruding to the front.

Insert the new cross axle top-to-bottom into the hole at the back.

The 2 small parts are finished! Great job, this was hard!

Let's mount the first one: skip 2 columns from the right, and put the brick 1x2 horizontally on the second row of knobs from the front. The rest of the part is overhanging to the back. One cross axle is pointing towards the top.

Repeat symmetrically on the left.

Find 4 white bricks 1x2.

Put 1 horizontally in front of the previous part.

Repeat symmetrically on the right.

Put 1 vertically to the right of the previous piece and the small part.

Repeat symmetrically on the left.

Find 2 white bricks 2x2.

Put 1 in the frontmost right corner on top of the previous pieces.

Repeat symmetrically on the left.

These two bricks are the bases of the front pillars of the car wash.

Collect the following 2 pieces:

1 dark stone grey grille tile 1x2,

and 1 white roof tile 1x2, 45°. (This piece is printed.)

Put the roof tile 1x2 vertically to the right of the previous piece.

This piece is printed with a cash register with keypad and card slot. Here, customers can pay for the car wash services.

Put the grille tile 1x2 vertically on the third row from the left, next to the brick 2x2 at the front.

Find 4 white bricks 1x2x5.

They will form two pillars at the back. First, locate the two plates 2x2 in the left and right corners at the back.

Put 2 horizontally on the plate 2x2 at the left back.

Put the other 2 horizontally on the plate 2x2 at the right back.

Next, we will build 2 car wash brushes.

Collect the following 2 pieces:

1 black angular technic beam 4m x 4m with 2 cross holes, 53°,

and 1 bright red cross axle 2m with 2 grooves.

Put the angular technic beam flat on the table, one arm of the beam pointing to you, the other arm pointing to the left back.

Insert the cross axle top to bottom into the cross hole at the front.

Find 1 black rubber band with 2 cross holes.

Put it on the cross axle, one cross hole overhanging to the front.

Find 1 dark stone grey cross axle 5.5m with stop 1m. (This piece is 5.5 knobs long, the stop is located laterally after 1 knob's length.)

Insert the short part of the cross axle top to bottom into the cross hole at the back.

Find 2 bright blue brushes.

Put them on the cross axle at the back.

The first car wash brush is finished! Good job! To mount it, put the cross hole of the rubber band on the cross axle at the front right of the structure. Let the brush extend to the back left.

Now, let's make the second brush.

Collect the following 2 pieces:

1 black angular technic beam 4m x 4m with 2 cross holes, 53°,

and 1 bright red cross axle 2m with 2 grooves.

Put the angular technic beam flat on the table, one arm pointing to you, the other arm pointing to the right back.

Insert the cross axle top-to-bottom into the cross hole at the front.

Find 1 black rubber band with 2 cross holes.

Put it on the cross axle, one cross hole overhanging to the front.

Find 1 dark stone grey cross axle 5.5m with stop 1m.

Insert the short part of the cross axle into the cross hole at the back.

Find 2 bright blue brushes.

Put them on the cross axle at the back.

To mount this brush, put its front cross hole on the cross axle at the left front of the structure. Let the brush extend to the back right.

Find 2 white bricks 2x2.

Put them on the 2 pillar bases at the front, which are the two bricks 2x2 in the frontmost left and right corners.

Find 2 white bricks 1x2.

Put them horizontally on the back rows of the two previous pieces.

Now, let's make a small part.

Collect the following 3 pieces:

1 white brick 1x2 with 2 side knobs,

1 transparent green round tile 1x1,

and 1 transparent red round tile 1x1.

Put the brick 1x2 horizontally on the table, side knobs to the front.

Put the green round tile 1x1 upright on the left side knob.

Put the red round tile 1x1 upright on the right side knob.

Mount this part horizontally on the front row of the front pillar on the right, side knobs to the front.

Find 1 white brick 1x2 with 2 side knobs.

Put it horizontally on the front row of the front pillar on the left, side knobs to the front.

Find 2 white bricks 2x2.

Put them on top of the left and right front pillar.

Find 1 dark green flat tile 2x3.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 rectangular sticker number 14. Ask a sighted person to help you find the correct sticker.

Put it on top.

The sticker is printed with the instruction sign of the car wash. It is mostly white with a green banner on top. There is white writing in the banner that says: "3 easy steps". Below, steps 1 through 3 are indicated with red digits. Green arrows next to the digits point to black symbols of what each step does: step 1 is soap, step 2 is wash, and step 3 is shine.

Mount this part upright on the side knobs at the front pillar on the left.

Open bag number 4. You can choose to have the bricks sorted by color again. This bag contains the remaining bricks and pieces of the car wash.

Find 4 dark green bricks 2x2.

Put them on top of the 4 pillars, 1 brick each.

Find 4 dark green bricks 2x2.

Again, put them on top of the 4 pillars.

Find 4 dark green bricks 2x2.

Put them on top of the 4 pillars. By now we have added 3 green bricks 2x2 to every pillar.

Find 4 dark green bricks 2x2.

Put them on top of the 4 pillars. This is the last round.

Find 4 black bricks 1x2 with cross hole.

Put 1 vertically on the inner column of the back pillar at the left.

Repeat symmetrically at the front.

Put another 1 vertically on the inner column of the back pillar at the right.

Repeat symmetrically at the front.

Find 2 black technic bricks 1x14.

Put 1 vertically to the right of the two previous pieces. This means it rests on the outer columns of the two right pillars.

Repeat symmetrically on the left.

Find 2 bright red plates 1x2.

Put 1 horizontally on the back row of the back pillar on the left.

Repeat symmetrically on the right.

Now, we will build 2 car wash glass walls.

Collect the following 2 pieces:

1 white plate 1x12,

and 1 transparent light blue wall element 1x6x5 with 6 top knobs and sides.

Put the wall element 1x6x5 horizontally on the table, hollow to the back.

Put the plate 1x12 horizontally on top, starting from the left edge, overhanging to the right.

Find 1 transparent light blue wall element 1x6x5 with 6 top knobs and sides.

Put it horizontally underneath the overhanging part of the previous piece, hollow to the back.

Find 2 transparent light blue wall elements 1x6x5 with 6 top knobs and sides.

Put them horizontally next to each other on top of the previous pieces, hollows to the back.

Mount this glass wall vertically on the rightmost column, hollow to the left. It should fit perfectly between the flat tile elements.

Next up is the second glass wall.

Collect the following 2 pieces:

1 transparent light blue wall element 1x6x5 with 6 top knobs and sides,

and 1 white plate 1x12.

Put the wall element 1x6x5 horizontally on the table, hollow to the back.

Put the plate 1x12 horizontally on top, starting from the left edge, overhanging to the right.

Find 1 transparent light blue wall element 1x6x5 with 6 top knobs and sides.

Put it horizontally underneath the overhanging part of the previous piece, hollow to the back.

Find 2 transparent light blue wall elements 1x6x5 with 6 top knobs and sides.

Put them horizontally next to each other on top of the previous pieces, hollows to the back.

Mount the second glass wall vertically on the leftmost column, hollow to the right.

Collect the following 4 pieces:

2 bright red plates 2x2,

and 2 bright red plates 1x1.

Put 1 plate 1x1 on the front left knob of the front pillar on the left.

Repeat symmetrically on the right.

Put 1 plate 2x2 behind the previous piece so that it connects the glass wall with the vertical connecting brick.

Repeat symmetrically on the left.

Find 5 bright red plates 2x16.

Put 1 horizontally behind the two previous pieces.

Put the other 4 horizontally behind the previous piece to form a flat roof.

Next up, we will build the top water jet unit.

Collect the following 2 pieces:

1 black brick 1x2 with cross hole,

and 1 black cross axle 12m. (This piece is 12 knobs long.)

Put the brick 1x2 vertically on the table.

Insert the cross axle into the cross hole from the left. Only push it in until it is flush on the right side. This means the cross axle only sticks out to the left.

Find 1 bright yellow cross bushing 1x½.

Put it on the cross axle from the left and push it further until it touches the brick 1x2.

Next up, we will build 5 jet nozzles.

Collect the following 2 pieces:

1 black t-shaped technic beam 1m with plate 1x2,

and 1 white plate 1x2 with 1 knob.

Put the plate with 1 knob on the 2 knobs of the technic beam.

Find 1 transparent light blue flame with 5 fire tongues. (Here, the flame is actually a jet of water.)

Insert the shaft of the flame into the knob of the previous piece.

The first jet nozzle is finished! Now, put the round hole onto the cross axle and slide it all the way to the right. The water jet points towards the bottom.

Find 1 white technic bushing 1m. (This piece is 1 knob long and has the form of a round sleeve.)

Put it on the cross axle, slide it all the way to the right.

Let's make the second jet nozzle.

Collect the following 2 pieces:

1 white plate 1x2 with 1 knob,

and 1 black t-shaped technic beam 1m with plate 1x2.

Put the plate with 1 knob on the 2 knobs of the technic beam.

Find 1 transparent light blue flame with 5 fire tongues.

Insert the shaft of the flame into the knob of the previous piece.

Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.

Find 1 white technic bushing 1m.

Put it on the cross axle, slide it to the right.

Let's make the third jet nozzle.

Collect the following 2 pieces:

1 black t-shaped technic beam 1m with plate 1x2,

and 1 white plate 1x2 with 1 knob.

Put the plate with 1 knob on the 2 knobs of the technic beam.

Find 1 transparent light blue flame with 5 fire tongues.

Insert the shaft of the flame into the knob of the previous piece.

Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.

Find 1 white technic bushing 1m.

Put it on the cross axle, slide it to the right.

Let's make the fourth jet nozzle.

Collect the following 2 pieces:

1 black t-shaped technic beam 1m with plate 1x2,

and 1 white plate 1x2 with 1 knob.

Put the plate with 1 knob on the 2 knobs of the technic beam.

Find 1 transparent light blue flame with 5 fire tongues.

Insert the shaft of the flame into the knob of the previous piece.

Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.

Find 1 white technic bushing 1m.

Put it on the cross axle, slide it to the right.

Let's make the fifth and last jet nozzle.

Collect the following 2 pieces:

1 white plate 1x2 with 1 knob,

and 1 black t-shaped technic beam 1m with plate 1x2.

Put the plate with 1 knob on the 2 knobs of the technic beam.

Find 1 transparent light blue flame with 5 fire tongues.

Insert the shaft of the flame into the knob of the previous piece.

Put the round hole onto the cross axle and slide it to the right. The flame points towards the bottom.

Find 1 bright yellow cross bushing 1x½.

Put it on the cross axle and push it to the right.

Find 1 black brick 1x2 with cross hole.

Put it vertically on the cross axle from the left.

Make sure the cross axle is flush on both sides and does not stick out on one side.

The top water jet unit is finished! Well done! Mount it horizontally on top of the car wash: put the 2 bricks 1x2 vertically on the inner columns of the 2 front pillars. Let the jets of water point to the bottom.

Find 1 bright red plate 2x12.

Put it horizontally on top of the top water jet unit.

Now, we build 2 floodlights.

Collect the following 2 pieces:

1 transparent yellow plate 1x2,

and 1 white plate 1x2 with 2 vertical clasps on long side.

Put the plate 1x2 horizontally on the table.

Put the plate with 2 clasps horizontally on top, clasps to the back.

Find 1 medium stone grey plate 1x2 with handle on long side.

Snap the handle into the 2 clasps at the back, piece overhanging to the back.

The first floodlight is finished! Well done!

Mount the plate that is pointing to the back on the front row of the highest part of roof on the left edge. You can adjust the beam of the floodlight by folding it up and down.

Find another transparent yellow plate 1x2, and another white plate 1x2 with 2 vertical clasps on long side.

Put the plate 1x2 horizontally on the table.

Put the plate with clasps horizontally on top, clasps to the back.

Find another medium stone grey plate 1x2 with handle on long side.

Snap the handle into the clasps at the back, piece overhanging to the back.

The second floodlight is finished! Mount it on the front row on the right edge of the highest part.

Next, we build the commercial sign of the car wash.

Find 1 white plate 4x4 with 4 knobs.

Put it on the table, knobs to the front.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 rectangular sticker number 2.

Put it on the flat part behind the knobs.

The sticker is white and has the car wash logo on it: a yin and yang symbol composed of a green and a red drop. Below the logo, the word "Octan" is written in red and green letters.

Find 2 medium stone grey bottom angle plates 1x2 - 2x2 with 4 side knobs.

Mount the four side knobs of the first angle plate underneath the previous piece at the front on the right edge, plate 1x2 at the front and pointing to the bottom.

Mount the four side knobs of the second angle plate underneath to the left of the previous piece.

Flip the commercial sign upright and mount the two plates 1x2 horizontally centered on the frontmost row of the roof.

The car wash is finished! Very well done, this was a great effort! Turn the car wash so that the 2 protruding rows 1x4 at the bottom are pointing to the right. Then connect them to the two vertical cutouts on the left edge behind the EV charging station. Excellent!

The car wash with EV charging station and road plates is finished! Well done! This is already a huge part of the LEGO City town center. Ride your car on the roads of LEGO City, but watch out for pedestrians on the crosswalk! Charge your electric vehicle or have it washed in the cool car wash facility.

Open bag number 5. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Shirley Keeper Minifigure and the first half of the crane truck.

Next, we will build the Shirley Keeper Minifigure.

Collect the following 3 pieces:

1 bright blue and dark stone grey upper part of the body,

1 bright blue pair of legs,

and 1 bright yellow head.

Assemble the Minifigure: put the upper body on top of the legs, and put the head on top.

Find 1 bright orange hairpiece with a bob hairstyle.

Put it on the head.

Let's make Shirley's remote control for the crane truck.

Collect the following 2 pieces:

1 bright yellow plate 1x2 with handle on long side,

and 1 black round plate 1x1 with top shaft.

Put the plate 1x2 horizontally on the table, handle to the back.

Put the round plate 1x1 on the right knob.

Find 1 medium stone grey flat tile 1x1. (This piece is printed.)

Put it on the left knob.

The tile is printed with a gauge.

Snap the handle into one of Shirley Keeper's hands.

The Shirley Keeper Minifigure is finished! Great job! She is a sanitation worker in LEGO City, and therefore she is wearing blue worker overalls with a neon green reflective vest on top. She has ginger hair cut into a bob hairstyle and is wearing round red glasses as well as red lipstick. She has a small beauty mark on her left cheek. She looks a bit stressed, though, because there is a lot to do to keep LEGO City clean. Let's help her and build the crane truck!

Next up, we will build the crane truck.

Collect the following 2 pieces:

1 medium stone grey plate 2x16,

and 1 black plate 1x6.

Put the plate 2x16 horizontally on the table.

Put the plate 1x6 vertically centered on the rightmost column.

Collect the following 3 pieces:

2 medium stone grey one-stepped bearing elements 2x2 with side pin connector,

and 1 transparent red plate 1x2.

Put the plate 1x2 vertically to the left of the previous piece.

Put 1 one-stepped bearing element 2x2 to the left on the back row, one row and pin connector overhanging to the back.

Repeat symmetrically at the front.

Collect the following 3 pieces:

2 transparent red plates 1x2,

and 1 pale ocher yellow flat tile 2x4.

Put 1 plate 1x2 vertically to the left of the two previous pieces.

Put the flat tile 2x4 horizontally to the left.

Put the other plate 1x2 vertically to the left.

Collect the following 3 pieces:

2 medium stone grey one-stepped bearing elements 2x2 with side pin connector,

and 1 transparent red plate 1x2.

Put 1 one-stepped bearing element 2x2 to the left of the previous piece on the back row, one row and pin connector overhanging to the back.

Repeat symmetrically at the front.

Put the plate 1x2 vertically to the left.

Find 2 medium stone grey one-stepped bearing elements 2x2 with side pin connector.

Put 1 to the left of the previous piece on the back row, one row and pin connector overhanging to the back.

Repeat symmetrically at the front.

Find 1 black plate 2x2.

Put it to the left of the 2 previous pieces, one column overhanging to the left.

Find 2 medium stone grey plates 2x16.

Put 1 horizontally on the 2 frontmost rows, starting from the right edge. Make sure that there is still 1 knob sticking out towards the front on the rightmost column.

Put the other one horizontally behind the previous piece. Make sure that there is still 1 knob sticking out towards the back on the rightmost column. Two knobs are sticking out towards the left in the middle of the leftmost edge.

Collect the following 3 pieces:

2 transparent bright orange plates 1x1,

and 1 bright blue brick 1x4 with 4 side knobs.

Put 1 plate 1x1 on the backmost knob of the rightmost column.

Put the brick 1x4 vertically in front of the previous piece, side knobs to the right.

Put the other plate 1x1 in front of the previous piece.

Find 2 black inverted roof tiles 1x2, 45°.

Put 1 horizontally on top of the previous piece, slope to the left.

Repeat symmetrically at the back.

Collect the following 3 pieces:

2 black bricks 2x4 with mudguard,

and 1 bright red brick 2x3.

Put 1 brick with mudguard horizontally to the left of the previous piece on the back row, mudguard to the back.

Put the brick 2x3 horizontally in front of the previous piece. Make sure the two bricks are flush on the left side.

Put the other brick with mudguard horizontally in front of the previous piece on the front row, mudguard to the front.

Find 1 black inverted double roof tile 1x6x1, 45°.

Put it vertically to the left of the 3 previous pieces, slopes to the front and back.

Find 2 bright orange plates 2x4.

Put 1 vertically to the left of the previous piece.

Put the other one vertically to the left.

Find 6 black smooth roof tiles 1x2x⅔.

Put 3 horizontally to the left of the previous piece next to each other on the backmost row, slopes to the back.

Repeat symmetrically on the frontmost row.

Find 2 black smooth roof tiles 1x1x⅔.

Put 1 to the left of the previous pieces, slope to the front.

Repeat symmetrically at the back.

Find 1 black plate 1x6.

Put it vertically centered on the leftmost column.

Collect the following 2 pieces:

1 black plate 3x2 with half circle and hole,

and 1 bright red plate 3x2 with half circle and hole.

Stack them on top of each other, black plate at the bottom and red plate at the top. Make sure the half circles and holes align.

Mount them horizontally on the left edge on the middle two rows, half circle and hole overhanging to the left.

Next up, we build the tail lamps.

Collect the following 2 pieces:

1 black bottom angle plate 1x2 - 1x2 with 2 side knobs,

and 1 transparent red plate 1x2.

Put the angle plate horizontally on the table, side knobs to the front.

Put the plate 1x2 horizontally on top.

Find 2 transparent red round tiles 1x1.

Put them upright on the side knobs pointing to the front.

The first set of tail lamps is finished, well done! Mount it vertically on the leftmost column at the back, side knobs to the left.

Find another black bottom angle plate 1x2 - 1x2 with 2 side knobs, and another transparent red plate 1x2.

Put the angle plate horizontally on the table, side knobs to the front.

Put the plate 1x2 horizontally on top.

Find another 2 transparent red round tiles 1x1.

Put them upright on the side knobs pointing to the front.

Mount the second set of tail lamps vertically on the leftmost column at the front, side knobs to the left.

Find 4 dark stone grey top angle plates 1x2 - 2x2 with 4 side knobs.

Put 2 horizontally on the four knobs of the low part of the back row, side knobs to the back.

Repeat symmetrically at the front.

Now we will make a small part.

Collect the following 3 pieces:

1 bright orange plate 2x4,

and 2 black grille tiles 1x2.

Put the plate 2x4 horizontally on the table.

Put the grille tiles horizontally on the back row.

Find 1 bright orange flat tile 1x4.

Put it horizontally on the front row.

Flip this part upright, and mount it on the 8 side knobs pointing to the front, grille tiles forming the upper row.

Let's repeat this part for the back side.

Collect the following 2 pieces:

1 bright orange plate 2x4,

and 1 bright orange flat tile 1x4.

Put the plate 2x4 horizontally on the table.

Put the flat tile 1x4 horizontally on the back row.

Find 2 black grille tiles 1x2.

Put the grille tiles horizontally on the front row.

Flip the part upright, and mount it on the 8 side knobs pointing to the back. Make sure the grille tiles are forming the upper row of the part.

Find 1 black plate 6x12.

Put it horizontally centered on top of the structure, starting from the left edge.

Open bag number 6. You can choose to have the bricks sorted by color again. This bag contains the remaining bricks and pieces for the crane truck.

Find 1 white plate 4x6.

Put it vertically on top of the structure, starting from the right edge.

Collect the following 2 pieces:

1 white plate 1x6,

and 1 white plate 2x6.

Put the plate 2x6 vertically to the left of the previous piece.

Put the plate 1x6 vertically to the left of the previous piece.

Find 4 white flat tiles 1x6.

Put 1 vertically to the left of the previous piece.

Put 1 horizontally to the left of the previous piece on the backmost row.

Repeat symmetrically on the front row.

Put the last one vertically to the left of the two previous pieces.

Collect the following 5 pieces:

4 medium stone grey plates 2x2 with 1 knob,

and 1 medium stone grey flat tile 2x4.

Put 1 plate 2x2 with 1 knob to the right of the previous piece in the back corner.

Put another one in front of the previous piece.

Put the flat tile 2x4 vertically to the right of the two previous pieces.

Put the 2 remaining plates 2x2 with 1 knob to the right of the previous piece.

Find 3 bright orange smooth roof tiles 1x2x⅔.

Put them vertically on the second column from the left, slopes to the left.

Collect the following 4 pieces:

2 transparent bright orange flat tiles 1x1,

and 2 black grille tiles 1x2.

Put 1 flat tile 1x1 on the backmost knob of the leftmost column.

Put 1 grille tile vertically in front of the previous piece.

Put the other grille tile vertically in front of the previous piece.

Put the other flat tile 1x1 in front of the previous piece.

Collect the following 3 pieces:

1 bright orange plate 1x6,

and 2 bright orange plates 1x4.

Put 1 plate 1x4 horizontally on the backmost row, starting from the right edge.

Repeat symmetrically at the front.

Put the plate 1x6 vertically to the left of the 2 previous pieces.

Collect the following 2 pieces:

1 black and bright blue small steering wheel with plate 1x2,

and 1 bright blue plate 1x2 with angled top handle.

Put the small steering wheel 1x2 vertically centered on the rightmost column, steering wheel to the left.

Put the plate 1x2 with angled top handle vertically centered on the fourth column from the right, angle to the right.

Collect the following 4 pieces:

2 bright orange bricks 1x2,

and 2 bright orange bricks 1x3.

Put 1 brick 1x3 horizontally on the backmost row, starting from the right edge.

Repeat symmetrically on the front row.

Put 1 brick 1x2 horizontally to the left.

Repeat symmetrically on the back row.

Collect the following 2 pieces:

1 dark stone grey handrail element with bottom plate 1x6,

and 1 medium stone grey wall element 1x4x3 with top knobs.

Put the wall element vertically centered between the two previous pieces on the left edge, panel to the left. This means it is mounted on the fifth column from the right.

Skip 1 column to the left, and mount the handrail element vertically, handrail to the right.

Now, we build the front grille of the crane truck.

Collect the following 2 pieces:

1 black relief plate 2x6x⅔ with 4 raised top knobs and 4 side knobs,

and 1 medium stone grey plate 2x3.

Put the relief plate 2x6 vertically on the table, side knobs to the right.

Put the plate 2x3 horizontally on the left column on the second and third knob from the back, two columns overhanging to the left.

Find 1 medium stone grey plate 2x3.

Put it horizontally in front of the previous piece, two columns overhanging to the left.

Find 1 black plate 2x6.

Put it vertically centered underneath the two previous pieces.

Find 2 bright orange smooth roof tiles 1x2x⅔.

Put 1 horizontally on the backmost row, starting from the right edge, slope to the back.

Repeat symmetrically at the front.

Find 4 transparent smooth roof tiles 1x1x⅔.

Put 2 to the left of the previous piece, slopes to the front.

Repeat symmetrically at the back.

Find 1 bright orange flat tile 1x4.