LEGO 60286 Beach Rescue ATV
LEGO Audio & Braille Building Instructions for the LEGO City set "Beach Rescue ATV".
Head for the coast with the LEGO City Beach Rescue ATV. Unload the cool water scooter from the trailer and launch it into the ocean. Help the lifeguard patrol the coastal waters. Power through the surf, taking care not to harm the nearby shark. When you're done patrolling the area, load up the water scooter, jump aboard the all-terrain vehicle, secure the roll cage and move on to the next beach!
On the box cover, the lifeguard is riding the water scooter at the shore in the front left corner of the cover, handlebar in the left hand and binoculars in the right. But in that moment, he is spotting the shark to his left appearing on the water surface. In the back of the scene, the beach all-terrain vehicle with boat trailer is parked on the sandy beach.
Open the box. This can be tricky; ask someone to help you!
The box contains 1 booklet with visual building instructions and 2 plastic bags with numbers printed on them. Ask a sighted person to help you find the correct bag!
Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the lifeguard Minifigure, the shark and the water scooter.
Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!
First, we will build the lifeguard Minifigure.
Find 1 bright blue pair of legs.
Find 1 bright red and bright yellow upper part of the body.
Put the upper body on top of the legs.
Find 1 bright orange life vest with neck bracket.
Put it around the neck, life vest overhanging towards the front of the Minifigure.
Find 1 bright yellow head.
Put it on top.
Find 1 bright red cap with screen.
Put it on the head.
The lifeguard Minifigure is finished! Well done! He is wearing blue pants and a zipper jacket with red sleeves and top half, and a yellow bottom half as well as yellow and red zippers. On his left chest the Star of Life symbol is sewed on, the symbol used by many emergency medical services. It is a bright blue six-pointed star with blunt ends that has a white outline. The lifeguard is also wearing mirrored sunglasses. The back of his jacket again has a large Star of Life print in the middle, this time also with a white Rod of Asclepius in the middle.
Next, we will assemble the shark.
Find 1 dark stone grey shark body 6x9.
Find 1 dark stone grey shark jaw.
Snap the jaw into the front opening of the shark body. The shark has two grim-looking eyes that are printed on the left and right side of its head.
The shark is finished! Well done! Watch out and make sure that it can roam the waters in peace!
Next up, we will build the water scooter.
Find 1 bright red inverted double roof tile 2x4, 45°.
Put it vertically on the table, slopes to the front and back.
Find 1 dark stone grey plate 2x6.
Put it horizontally on the lower part of the roof tile on the right edge, 4 columsn overhanging to the left.
Find 1 bright red inverted double roof tile 2x4, 45°.
Put it vertically underneath the previous piece to the left of the other roof tile.
Find 2 bright yellow plates 1x2 with vertical clasp on long side.
Put 1 horizontally on the previous piece on the backmost row, clasp to the back.
Repeat symmetrically at the front.
Find 1 bright red inverted brick 4x6 with bow.
Turn it horizontally so that the narrow end is pointing to the left. Then put it underneath the structure from the left.
Find 1 dark stone grey plate 1x2 with upward hook on long side.
Put it vertically on the third column from the left edge, hook to the right.
Find 1 titanium metallic curve plate 2x3½ with 2 knobs and fin.
Put it horizontally on the 2 middle rows, starting from the right edge, fin to the right, 2 knobs to the left.
Find 2 bright yellow one-stepped curve tiles 1x3x⅓.
Put 1 horizontally on the backmost row, starting from the right edge, curve to the right.
Repeat symmetrically at the front.
Find 2 bright yellow one-stepped curve tiles 1x3x⅓.
Put 1 horizontally to the left of the previous piece, curve to the left.
Repeat symmetrically at the back.
Now, let's make the handlebar of the water scooter.
Find 1 dark stone grey mechanical arm with clasp.
Put it on the table, cube at the bottom, clasp pointing to the right.
Find 1 dark stone grey handlebar with bottom shaft.
Snap the bottom shaft into the clasp of the mechanical arm. Make sure the handlebars are slightly pointing to the right.
Insert the upward hook on the left side of the boat into the cube from the bottom, handlebar to the right.
Find 1 bright blue brick 1x2.
Put it vertically on the third column from the left.
Find 1 bright yellow trapeze plate 4x4 with cut-out.
Put it horizontally on the left edge of the structure, cutout hugging the handlebar towards the right.
Find 1 bright yellow one-stepped curve tile 2x2x⅔. (This piece is printed.)
Put it on the second and third column from the left, slope to the left.
This piece is printed with the blue Star of Life symbol in a white circle that is surrounded by a thick blue frame, another thin white frame, and a thin blue outline. In the thick blue frame, the words "BEACH RESCUE" are printed on in white letters, and there are four white stripes to the left and right of the Star of Life.
Find 1 dark stone grey pair of binoculars.
Snap them into the side clasp pointing to the back.
Find 1 black walkie-talkie plate 1x2 with antenna.
Snap its handle into the side clasp pointing to the front.
The water scooter is finished! Well done! Everything is ready for the lifeguard to go on his first mission in the water!
Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the beach ATV and the boat trailer.
Next, we will build the beach all-terrain vehicle.
Find 1 black bearing element 2x2 with 2 small connector pins.
Put it vertically on the table, connector pins to the front and back.
Find 1 transparent red plate 1x2.
Put it vertically on the right column.
Find 1 dark stone grey plate 2x6.
Put it horizontally on the left column, 5 columns overhanging to the left.
Find 1 black bearing element 2x2 with 2 small connector pins.
Put it vertically underneath the leftmost column of the previous piece, one column of the bearing element overhanging to the left.
Find 1 white bottom angle plate 1x2 - 2x2 with 4 side knobs.
Put it vertically on the leftmost column, 4 side knobs to the left.
Find 1 bright red trapeze plate 4x4 with cut-out.
Put it horizontally on top of the previous piece and the column to its right, narrow end to the left, cut-out to the right.
Find 1 white plate 2x2.
Put it into the cut-out of the previous piece.
Find 2 bright red wedge plates 2x2 with 45° corner and 3 knobs.
Put 1 to the right of the previous piece on the back row, one row overhanging to the back, cut corner to the back right.
Repeat symmetrically on the front row, cut corner to the front right.
Find 1 medium stone grey plate 2x2 with side ball socket and top cross hole.
Put it to the right of the two previous pieces, ball socket to the right.
Find 1 black plate 2x3.
Put it horizontally on the previous piece, starting from the right edge.
Find 1 bright blue seat 2x2x2.
Put it to the left of the previous piece, seatback to the right.
Find 1 black and bright blue small steering wheel with plate 1x2.
Put it to the left of the previous piece, steering wheel to the right.
Find 1 bright blue plate 2x2.
Put it to the left of the previous piece.
Find 2 bright yellow arched bricks 1x1 with protruding plate.
Put 1 on the protruding knob at the back, protruding plate to the right.
Repeat symmetrically at the front.
Find 1 bright red plate 2x3.
Put it horizontally to the right of the seat, one column overhanging to the right above the ball socket.
Find 1 bright yellow plate 1x4.
Put it vertically centered on the third column from the right.
Find 1 bright yellow plate 2x4.
Put it vertically to the right of the previous piece.
Find 2 bright yellow small panel elements 1x4x1.
Put 1 horizontally on the backmost row, starting from the right edge, panel to the back.
Repeat symmetrically at the front.
Find 1 white plate 2x2.
Put it on the leftmost edge.
Find 1 bright yellow racers mudguard plate 2½x4 with headlight relief.
Put it vertically on top of the previous piece, mudguard slopes pointing to the left.
Find 2 bright red plates 1x2 with top clasp.
Put 1 horizontally on the back row of the previous piece, clasp to the right.
Repeat symmetrically on the front row.
Find 1 dark stone grey smooth roof tile 1x2x⅔.
Put it upright horizontally on the lower side knobs on the left side, slope to the bottom.
Next, we will make a small part.
Find 1 white plate 1x2.
Put it horizontally on the table.
Find 1 transparent light blue flat tile 1x2.
Put it horizontally on top.
Mount this part upright horizontally on the upper side knobs on the left side.
Find 1 bright yellow one-stepped curve tile 2x2x⅔. (This piece is printed.)
Put it on the leftmost four knobs, slope to the left.
This piece is printed with the same design as the curve tile on the water scooter: the blue Star of Life symbol in a white circle that is surrounded by a thick blue frame, another thin white frame, and a thin blue outline. In the thick blue frame, the words "BEACH RESCUE" are printed on in white letters, and there are four white stripes to the left and right of the Star of Life.
Find 1 black driver's cab 4x6x3. This will be the roll cage of the ATV.
Turn it horizontally so that the two bottom bars are on the left and right. Then, snap the bottom bar on the left into the two clasps on the top left of the vehicle.
If done correctly, you can now open and close the roll cage on its right side.
Find 1 bright yellow rounded plate 1x2.
Put it vertically left column of the top knobs of the previous piece.
Find 1 transparent bright orange bulb with shaft.
Insert its shaft into the back knob of the previous piece.
Find 1 bright red megaphone with shaft.
Insert its shaft into the knob in front of the previous piece, funnel to the left.
Next, we will assemble the 4 ATV wheels.
Let's start with one.
Find 1 black wide rubber tire with high profile. (Be careful not to confuse it with the tires for the boat trailer. The ATV tires you need now have a higher profile, the trailer tires have a rather flat profile.)
Find 1 medium stone grey wide rim with hole.
Put the tire around the rim.
Find another 3 rims and another 3 tires.
Assemble the remaining 3 wheels just like the first one.
The 4 ATV wheels are finished! Well done! Snap them on the connector pins at the bottom of the vehicle.
The beach all-terrain vehicle is finished! Great job! Now the lifeguard can jump into his ATV and rush to the next emergency site. The megaphone and warning light will help you to navigate even through crowded beaches.
Next, we will build the boat trailer.
Find 1 medium stone grey plate 2x8.
Put it horizontally on the table.
Find 1 transparent red plate 1x2.
Put it vertically on the rightmost column.
Find 1 dark stone grey plate 2x6.
Put it horizontally to the left of the previous piece.
Find 1 black plate 1x2 with towing extension 3m and ball. (This means the towing extension is 3 knobs long.)
Put it horizontally on the leftmost column, towing extension overhanging to the left.
Find 1 medium stone grey plate 2x2 with 1 knob.
Put it on the right edge.
Find 1 medium stone grey plate 2x2 with 1 knob.
Put it to the left of the previous piece.
Find 1 medium stone grey flat tile 2x4.
Put it horizontally to the left of the previous piece.
Find 1 black bearing element 2x2 with 2 small connector pins.
First, flip the structure upside down. Make sure the towing extension stays on the left side.
Put the bearing element vertically in the middle of the plate 2x6, connector pins pointing to the front and back.
Now, we will assemble the 2 trailer wheels.
Let's start with one.
Find 1 black rubber tire with staggered low profile.
Find 1 medium stone grey rim with cross wheel hub and spokes.
Put the tire around the rim.
Assemble the second tire just like the first one.
Well done! Now snap the tires onto the two connectors on the boat trailer, spokes facing outward.
The boat trailer is finished! Great job! Flip it right side up again and then snap the ball of the towing extension into the ball cup on the ATV.