LEGO 60285 Sports Car 

LEGO Audio & Braille Building Instructions for the LEGO City set "Sports Car".

Vroom - vroom! Take a ride in the amazing LEGO City Sports Car. It's packed with awesome features, including an adjustable rear spoiler and cool black rims with ground-gripping tires for high-speed driving. Check out the eye-catching aerodynamic bodywork and stellar blue finish. You can even remove the roof for an open-top drive through the streets of LEGO City.

On the box cover, the Sports Car is driving on the streets of LEGO City. The car front and side surface are shown. It has a very cool and sleek design: curved surfaces and bodywork all over in a beautiful shade of blue, ice blue front headlights, generous mudguards, a playful front spoiler, and a large adjustable rear spoiler. The driver sitting in the car is having a great time in this beautiful vehicle!

Open the box. This can be tricky; ask someone to help you!

The box contains 1 booklet with visual building instructions, 2 plastic bags with numbers printed on them, and 1 loose piece: a wagon bottom 6x10 with 4 pin connectors. Ask a sighted person to help you find the correct bag!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the driver Minifigure and the first half of the Sports Car.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we build the driver Minifigure.

Collect the following 4 pieces:

1 bright yellow head,

1 pale ocher yellow hairpiece with short hair and side fringe,

1 maroon red and bright yellow upper part of the body,

and 1 white pair of legs.

Assemble the Minifigure: put the upper body on top of the legs, put the head on top and then put the hair on the head.

The driver Minifigure is finished! Great job! This sports car driver is wearing a maroon red leather jacket with two chest pockets, a baby blue polo shirt and white pants. He has light blonde hair and a tiny goatee on his chin, dark eyebrows and a daring smile on his face. Time to build his car!

Next, we will build the Sports Car.

Find 1 black wagon bottom 6x10 with 4 pin connectors.

Put it horizontally on the table, pin connectors to the front and back.

Find 1 medium stone grey top angle plate 1x2 - 1x2 with 2 side knobs.

Put it vertically centered on the rightmost column, side knobs to the right.

Find 1 dark stone grey rounded plate 1x2.

Put it upright horizontally on the right side knobs of the previous piece.

The two knobs of this piece will be the exhaust pipes of the Sports Car!

Find 1 dark azure blue grille tile 1x2.

Put it vertically centered on the second column from the right.

Find 1 white palisade brick 1x2.

Put it vertically to the left of the previous piece.

Find 1 black mudguard plate 3x4 with rounded square mudguard. (Don't confuse it with the blue bricks with round mudguard.)

Put it to the right of the previous piece, mudguard overhanging to the right.

Find 1 medium stone grey plate 2x2.

Put it on top of the previous piece.

Find 1 bright yellow plate 2x3.

Put it horizontally on top of the previous piece and the column to its left.

Find 2 dark azure blue bricks 2x4 with round mudguard.

Put 1 horizontally on the backmost row on the right edge, mudguard overhanging to the back.

Repeat symmetrically at the front.

Next up, we will build the base plate of the rear of the car.

Find 1 bright red top angle plate 1x2 - 1x4 with 4 side knobs.

Put it vertically on the table, 4 side knobs pointing to the right.

Find 1 black plate 1x4.

Put it upright horizontally on the 4 side knobs of the angle plate.

Mount base plate vertically centered on the rightmost column, side knobs to the right.

Find 1 dark green plate 1x2.

Put it vertically centered to the left of the previous part.

Find 1 white smooth roof tile 1x2x⅔.

Put it vertically centered on the fourth column from the right, slope to the left.

Find 1 black and white small steering wheel with plate 1x2.

Put it vertically centered on the fourth column from the left, steering wheel to the right.

Find 2 white plates 2x4.

Put 1 horizontally centered on the 2 backmost rows.

Repeat symmetrically at the front.

Find 2 dark azure blue inverted double roof tiles 2x6, 45°.

Put them horizontally on the two previous pieces, slopes to the left and right.

Find 1 dark azure blue plate 1x6.

Put it vertically on the third column from the right.

Find 2 white small panel elements 1x4x1.

Put 1 horizontally centered on the second column from the back, panel to the back.

Repeat symmetrically at the front.

Find 2 dark azure blue smooth curve bricks 1x4x1⅓.

Put 1 horizontally in front of the previous piece, curve to the front.

Repeat symmetrically at the back.

Find 2 dark azure blue plates 1x2 with angled top handle.

Put them vertically next to each other on the third column from the right, slopes to the left. Make sure the frontmost and backmost knob remain empty.

Find 1 black plate 4x4.

Put it to the right of the 2 previous pieces, two columns overhanging to the right.

Now, let's make 2 small parts.

Find 2 dark azure blue plates 1x4.

Put them horizontally next to each other on the table.

Find 2 dark azure blue one-stepped curve tiles 1x2x⅔.

Put 1 horizontally on the leftmost knob of one of the two previous pieces, curve to the left.

Repeat with the other plate and curve tile.

Collect the following 4 pieces:

2 dark azure blue flat tiles 1x1 with ½ circle,

and 2 dark azure blue flat tiles 1x2.

Put the flat tiles 1x2 horizontally to the right of the curve tiles.

Put the flat tiles 1x1 on the rightmost knobs, half circles to the right.

The 2 small parts are finished! Great job! Mount one horizontally on the backmost row, starting from the right edge, curve to the left, and half circle to the right. Mount the other one symmetrically on the front row.

Find 2 dark azure blue roof tiles 1x4x1, 18°.

Put 1 horizontally behind the previous piece, slope to the right.

Repeat symmetrically at the back.

Find 1 dark stone grey arched curve brick 2x2 with 2 knobs.

Put it between the two previous pieces on the third and fourth column from the right, top knobs to the left.

Next, we will make a small part.

Collect the following 2 pieces:

1 black plate 1x2 with handle on long side,

and 1 transparent red plate 1x2.

Put the plate 1x2 with handle vertically on the table, handle to the right.

Put the plate 1x2 vertically on top.

Mount this small part vertically centered on top of the previous piece, handle to the right.

Find 1 dark azure blue bow tile 1x4x⅔.

Put it vertically on top of the small part, locking it in.

Find 2 black bent skeleton arms with 2 clasps.

Snap 1 onto the handle sticking out at the top center towards the right. Make sure the bend is pointing up and then to the right.

Mount the other one next to the first one in the same orientation.

Find 1 dark azure blue spoiler panel 2x4 with sloped ends and bottom shaft.

Snap its shaft into the two clasps of the 2 previous pieces sticking out towards the right.

You can fold the spoiler up and down and adjust it for perfect aerodynamics!

Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains the remaining bricks and pieces for the Sports Car.

Next, we will build the bottom panel of the car front.

Find 1 black plate 2x6 with 2 round corners.

Put it vertically on the table, round corners to the right.

Find 1 white plate 2x6.

Put it horizontally on the 2 middle rows, starting from the left edge, four columns overhanging to the right.

Find 2 white wedge plates 2x2 with 45° corner and 3 knobs.

Put 1 behind the previous piece, cut-off corner to the back left.

Repeat symmetrically at the front, cut-off corner to the front left.

The bottom panel of the car front is finished! Well done! Insert it into the structure from the left and mount it to the left of the steering wheel.

Find 1 bright yellow brick 2x3.

Put it horizontally to the left of the steering wheel.

Collect the following 2 pieces:

1 medium stone grey plate 2x2,

and 1 dark azure blue plate 1x6.

Put the plate 1x6 vertically centered on the rightmost column of the previous piece.

Put the plate 2x2 to the left.

Find 2 dark azure blue bricks 2x4 with round mudguard.

Put 1 horizontally behind the previous piece, mudguard overhanging to the back.

Repeat symmetrically at the front.

Find 1 dark azure blue grille tile 1x2.

Put it vertically centered on the third column from the leftmost edge.

Find 1 dark azure blue plate 1x6.

Put it vertically centered to the left of the previous piece.

Collect the following 3 pieces:

1 black plate 1x2 with racer grille,

and 2 transparent bright orange plates 1x2.

Put the plate with racer grille vertically centered on the previous piece, bent up tabs to the left, pointing to the front and back.

Put 1 plate 1x2 vertically behind the previous piece.

Repeat symmetrically at the front.

Find 1 dark azure blue plate 1x2 with 2 curved wedge tiles 1x3.

Turn it vertically so that the curved wedge tiles are pointing to the left. Mount it on top of the grille tile to the right of the 2 previous pieces. However, it will not touch the grille tile, the piece will only connect in the middle of its 2 curved wedge tiles.

Find 1 dark azure blue two-stepped curve tile 2x4.

Put it horizontally on the 2 middle rows starting from the left edge, curve to the left. Make sure it is flus with the left edge of the structure.

Find 1 dark azure blue grille tile 1x2.

Put it vertically to the right of the previous piece.

Find 2 dark azure blue flat tiles 1x2.

Identify the 3 knobs at the top of the backmost row. Put 1 flat tile 1x2 horizontally on the right and middle knob.

Repeat symmetrically at the front.

Find 2 dark azure blue one-stepped curve tiles 1x2x⅔.

Put 1 horizontally to the left of the previous piece, curve to the left, one column overhanging to the left.

Repeat symmetrically at the back.

Find 2 transparent light blue smooth roof tiles 1x1x⅔.

Put 1 on the leftmost knob at the bottom of the backmost row, slope to the left.

Repeat symmetrically at the front.

Find 1 transparent brown windscreen 4x3x1⅓.

Put it vertically to the left of the steering wheel, slope to the left.

Find 1 dark azure blue hood plate 4x4x⅔ with 2 angled corners and 2 knobs.

Put it on top of the previous piece, top knobs to the right. The right side of this piece rests on the top handles and does not connect to any knobs.

Now, we build the rear of the Sports Car.

Find 1 dark azure blue plate 1x6.

Put it horizontally on the table.

Collect the following 3 pieces:

2 transparent bright orange plates 1x2,

and 1 dark stone grey rounded plate 1x2.

Put the rounded plate horizontally on the 2 middle knobs of the previous piece.

Put the 2 plates 1x2 horizontally to the left and right of the previous piece.

Find 2 dark azure blue one-stepped curve tiles 1x2x⅔.

Put 1 vertically on the rightmost knob, overhanging to the front, curve to the front.

Repeat symmetrically on the right.

Find 2 transparent red grille tiles 1x2.

Put them horizontally on the 4 remaining knobs.

The rear of the Sports Car is finished! Great job! Flip it upright so that the curves are pointing to the bottom. Mount it on the 4 side knobs pointing to the right side just beneath a protruding plate. Do not use the 2 side knobs at the bottom, they are the exhaust pipes.

Next, we will assemble the 4 wheels.

Find 4 black narrow rims with hole and spokes.

Find 4 black narrow rubber tires with low profile.

Put the tires around the rim.

Snap the wheels on the 4 connectors at the bottom. Make sure the spokes are facing outwards.

The Sports Car is finished! Great job! What a stylish and cool car! Seat the driver and take it for a spin on the streets of LEGO City! If the weather is particularly nice, take off the roof and enjoy the cool breeze in the cabriolet version of the car. Adjust the rear spoiler, and off you go!

You are all done building the LEGO City Sports Car set!

Enjoy!