LEGO 60283 Holiday Camper Van 

LEGO Audio & Braille Building Instructions for the LEGO City set "Holiday Camper Van".

Head for fun-filled vacations aboard the iconic LEGO City Holiday Camper Van. Drive to your favorite location, find a good spot to camp and unpack the outdoor furniture. Help bottle-feed the baby and use the baby carrier while you prepare dinner in the kitchenette. Enjoy a delicious picnic in the great outdoors, tuck baby into bed and plan your next destination. Tomorrow's another exciting day!

The box cover shows the Holiday Camper Van standing on the green meadow of a beautiful camping site on a sunny day. There are only a few small white clouds in the blue sky, and the camping site is surrounded by a white fence and many trees. The camper van is shown from the side, the spacious driver's cab facing left. There is a large and a smaller window on the side of the van, and between them there is the logo of the van company: it shows the brown silhouette of a deer standing in the mountains in front of a sunset, and a small brook is leading towards it. The logo is also printed on the top front of the van which accommodates the spacious sleeping compartment. The van is mostly white with a thin horizontal light blue line, a slightly thicker beige line and a thin dark grey line running under the windows on its side. The 4 wheels are black and have chrome-plated rims. In front of the van, there is a pebbled area for barbecuing, everything is set up for a tasty breakfast already. In the center, there are two camping chairs with table. A cup of coffee and a croissant are sitting on the camping table, and an egg is already frying in the pan on the camping stove. The coffee maker is also at the ready in case anyone wants a second cup. But first, mom is taking a picture of dad and baby in the right lower corner of the box cover. This looks like the perfect campsite morning!

Open the box. This can be tricky; ask someone to help you!

The box contains a booklet with visual building instructions, one small sheet with stickers, two plastic bags with numbers printed on them, and two loose pieces: one plate 2x16, and one plate 6x16. Ask a sighted person to help you find the correct bag!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the mom Minifigure with baby, the dad Minifigure with camera, the camping stove, and the first half of the Holiday Camper Van.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we will build the mom Minifigure with baby.

Collect the following 2 pieces:

1 medium lilac and bright yellow upper part of the body,

and 1 pale ocher yellow pair of legs.

Put the upper part of the body on the legs.

Collect the following 3 pieces:

1 bright yellow head,

1 dark orange hairpiece with shoulder-length hair,

and 1 mud grey baby carrier with neck bracket.

Put the neck bracket of the baby carrier around the neck. Make sure the carrier is on the front side of the Minifigure.

Put the head on top.

Put the hairpiece on top.

Next, we will build the baby Minifigure.

Collect the following 2 pieces:

1 teal blue baby Minifigure body,

and 1 bright yellow baby Minifigure head.

Put the head on the body.

The baby has a curious smile on his face. You can put him in the carrier now!

Find 1 feeding bottle with small shaft.

Snap it into one of mum's hands.

The mom Minifigure with baby is finished! Great job! Mom is wearing a lilac zipper jacket and beige cargo pants. She has a broad smile on her face and a few faint freckles on her cheeks. She can already take baby for a walk and check out the surroundings!

Next, we will build the dad Minifigure with camera.

Collect the following 4 pieces:

1 bright yellow head,

1 reddish brown mop of curly hair,

1 mud grey, dark azure blue and bright yellow upper part of the body,

and 1 earth blue pair of legs.

Assemble the Minifigure: put the upper body on top of the legs, and the head on top. Then put the hairpiece on top.

Now, let's assemble the camera.

Collect the following 2 pieces:

1 bright yellowish green camera,

and 1 transparent round tile 1x1.

Put the round tile 1x1 upright on the knob on the front side of the camera. This is the camera lens.

Snap the handle of the camera in dad's hand.

The dad Minifigure with camera is finished! Great job! Dad is wearing a bright blue shirt and a beige camping vest. He has an adventurous smile on his face, and a chin strap beard. Dad can join his family for a walk and take some pictures. It seems that he wants to take over baby and feed him! Mum and dad can easily switch.

Next, we will build the camping stove.

Collect the following 2 pieces:

1 dark stone grey round plate 2x2 with 1 knob,

and 1 bright red head. (This will actually serve as the gas cartridge for the stove.)

Put the round plate with 1 knob on the table.

Put the head on the knob.

Find 1 black pan.

Put it on top.

Collect the following 2 pieces:

1 white round tile 1x1 (this piece is printed),

and 1 dark orange croissant.

Put the round tile 1x1 into the pan. It is printed with a yellow egg yolk!

The camping stove is finished! Well done! Put the stove and the croissant aside for now. The family will need these things for breakfast once everything is set up.

Now, we will build the Holiday Camper Van.

Find 1 medium stone grey plate 2x16.

Put it horizontally on the table.

Find 2 black one-stepped bearing elements 2x2 with side pin connector.

Put 1 on the back row on the left edge, one row and pin connector overhanging to the back.

Repeat symmetrically at the front.

Collect the following 3 pieces:

1 bright red plate 1x4,

1 dark stone grey plate 6x8,

and 1 medium blue plate 1x4.

Put the medium blue plate 1x4 vertically centered to the right of the 2 previous pieces. Centered means that the piece is symmetrically overhanging to the front and back.

Put the plate 6x8 horizontally centered to the right.

Put the bright red plate 1x4 vertically centered to the right.

Find 2 black one-stepped bearing elements 2x2 with side pin connector.

Put 1 to the right of the previous piece on the back row, one row and pin connector overhanging to the back.

Repeat symmetrically at the front.

Collect the following 2 pieces:

1 dark stone grey plate 2x6,

and 1 bright red plate 1x4.

Put the plate 1x4 vertically centered to the right of the previous pieces.

Put the plate 2x6 vertically centered to the right, one column overhanging to the right.

Find 1 transparent red plate 1x2.

First, flip the structure upside down. Be careful to keep the left side and right side the same.

Put the plate 1x2 vertically centered on the rightmost column.

Collect the following 4 pieces:

2 white plates 2x2,

and 2 white plates 1x8.

Put 1 plate 2x2 into the back right corner.

Repeat symmetrically at the front.

Put 1 plate 1x8 horizontally on the backmost row of the plate 6x8.

Repeat symmetrically at the front.

Find 1 pale ocher yellow plate 2x10.

Flip the structure right side up again. Keep the left and right sides the same.

Put the plate 2x10 horizontally on the two middle rows, starting from the right edge.

Collect the following 3 pieces:

1 medium stone grey plate 2x2 with side ball socket and top cross hole,

and 2 medium blue flat tiles 1x2.

Put the plate 2x2 on the rightmost four knobs of the previous piece, ball socket overhanging to the right.

Put 1 flat tile 1x2 vertically to the left of the previous piece.

Put the other flat tile 1x2 vertically on the leftmost column of the plate 2x10. This means it is vertically centered on the 10th column from the right edge.

Find 1 pale ocher yellow brick 2x6.

Put it horizontally to the left of the previous piece.

Collect the following 2 pieces:

1 bright blue plate 1x2,

and 1 dark green plate 1x2.

Stack them on top of each other. The green plate is at the bottom, the blue plate is on top.

Put them vertically centered on the leftmost column.

Next, we will build the front grille base plate.

Find 1 bright yellow top angle plate 1x2 - 2x4 with 8 side knobs.

Find 1 dark green plate 2x4.

Put it upright horizontally on the 8 side knobs of the previous piece.

The front grille base plate is finished! Put the plate 1x2 vertically centered on the leftmost column, side knobs to the left.

Find 2 pale ocher yellow bricks 1x2 with 2 side knobs.

Put 1 vertically on the rightmost column at the back, side knobs to the right.

Repeat symmetrically at the front.

Collect the following 3 pieces:

2 pale ocher yellow inverted roof tiles 1x2, 45°,

and 1 transparent red plate 1x2.

Put the plate 1x2 vertically centered on the rightmost column of the structure.

Put 1 inverted roof tile 1x2 horizontally to the left of the previous piece on the front row, slope to the left.

Repeat symmetrically at the back.

Find 2 white bricks 2x4 with mudguard.

Put 1 horizontally to the left of the previous piece, mudguard overhanging to the back.

Repeat symmetrically at the front.

Find 2 pale ocher yellow inverted roof tiles 1x2, 45°.

Put 1 horizontally to the left of the previous piece on the frontmost row, slope to the right.

Repeat symmetrically at the back.

Collect the following 4 pieces:

2 pale ocher yellow bricks 1x6,

and 2 pale ocher yellow inverted roof tiles 1x2, 45°.

Put 1 brick 1x6 horizontally to the left of the previous piece.

Repeat symmetrically at the front.

Put 1 inverted roof tile 1x2 horizontally to the left of the previous piece, slope to the left.

Repeat symmetrically at the back.

Find 2 white bricks 2x4 with mudguard.

Put 1 horizontally to the left of the previous piece, mudguard overhanging to the back.

Repeat symmetrically at the front.

Collect the following 5 pieces:

2 medium blue plates 1x4,

1 medium blue plate 1x6,

1 medium blue flat tile 1x8,

and 1 medium blue flat tile 1x2.

Put 1 plate 1x4 vertically centered on the rightmost column.

Put the flat tile 1x8 horizontally on the backmost row, starting from the right edge.

Put the flat tile 1x2 horizontally to the left.

Put the flat tile 1x4 horizontally on the frontmost row, starting from the right edge.

Put the plate 1x6 horizontally to the left.

Find 3 medium blue plates 1x6.

Put 1 vertically on the 7th column from the left.

Put 1 horizontally on the backmost row to the left of the previous piece.

Repeat symmetrically at the front.

Collect the following 2 pieces:

1 white plate 1x4,

and 1 white plate 1x12.

Put the plate 1x4 vertically centered on the rightmost column.

Put the plate 1x12 horizontally on the frontmost row, starting from the right edge.

Next, we will build the coffeemaker.

Find 1 medium blue brick 1x4.

Put it horizontally on the table.

Collect the following 3 pieces:

1 transparent light blue round brick 1x1,

1 bright blue plate 1x2,

and 1 bright blue round plate 1x1.

Put the round brick 1x1 on the leftmost knob.

Put the plate 1x2 horizontally on the rightmost two knobs.

Put the round plate 1x1 on the right knob of the previous piece.

Collect the following 2 pieces:

1 transparent round brick 1x1,

and 1 bright purple Minifigure mug.

Put the round brick 1x1 on top of the previous piece.

Put the Minifigure mug to the left.

Collect the following 2 pieces:

1 silver metallic plate 1x1 with horizontal side tooth,

and 1 silver metallic round tile 1x1. (This piece has a print on it.)

Put the plate with tooth on the rightmost knob, tooth to the left.

Put the round tile 1x1 on the leftmost knob.

This piece is printed with the push tab of a soda can, so the little build on the left is actually a soda can!

The coffee maker is finished! Mount it vertically centered on the second row from the right, coffee maker at the front. You can later easily take the coffee maker out of the van and use it outside.

Find 2 bright blue seats 2x2x2.

Put 1 horizontally on the two middle rows to the left of the coffeemaker, seatback to the right.

Skip two columns to the left, and put the other seat horizontally on the two middle rows, seatback to the left.

Now, we will build the camping table.

Find 1 medium stone grey round profile brick 2x2 with top cross hole.

Put it on the table.

Find 1 bright blue round plate 2x2.

Put it on top.

Collect the following 2 pieces:

1 light purple round tile 1x1 (this piece is printed),

and 1 medium nougat brown round tile 1x1. (This piece is printed.)

Put them on two knobs of your choice. The purple one is printed with a strawberry, so it must be a strawberry shortcake! The brown one is printed with a donut with pink icing and blue sprinkles! Yummy!

The camping table is finished! Well done! Mount it between the two chairs.

Collect the following 2 pieces:

1 medium stone grey brick 2x4,

and 1 bright blue plate 1x2 with angled top handle.

Put the brick 2x4 vertically centered on the two leftmost columns.

Put the plate with top handle vertically centered on the sixth column from the left, slope to the left.

Find 1 black and bright blue small steering wheel with plate 1x2.

Put it vertically centered on the third column from the left, steering wheel to the right.

Collect the following 4 pieces:

2 transparent red round tiles 1x1,

and 2 transparent bright orange round tiles 1x1.

Put 1 orange round tile 1x1 upright on the backmost side knob on the right side of the structure.

Put 1 red round tile 1x1 upright in front of the previous piece.

Put the other red round tile 1x1 upright in front of the ball cup.

Put the other orange round tile 1x1 upright on the frontmost side knob.

Collect the following 2 pieces:

1 bright yellow Minifigure mug,

and 1 medium stone grey smooth roof tile 1x2x⅔. (This piece is printed.)

Put the smooth roof tile vertically centered on the second column from the left, slope to the right.

This piece is printed with a dashboard with light blue and red indicators and three gauges.

Put the Minifigure mug behind the previous piece.

Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all remaining bricks and pieces for the Holiday Camper Van.

Next, we build the interior window frame.

Collect the following 2 pieces:

1 mud grey plate 1x4,

and 1 medium stone grey frame 1x4x3.

Put the plate 1x4 horizontally on the table.

Put the frame 1x4x3 horizontally on top.

Find 1 mud grey plate 1x4.

Put it horizontally on top.

The interior window frame is finished! Put it vertically centered on the seventh column from the left. This is the column to the right of the angled top handle.

Next up, we will build the rear window.

Find 1 white brick 1x4.

Put it horizontally on the table.

Continue if you want to decorate the piece with the license plate sticker now. If not, skip the next three sentences.

Find 1 small rectangular sticker number 3. Ask a sighted person to help you find the correct sticker.

Put it centered on the front side surface of the brick.

The sticker is white with a bold black frame. The license number is "A H 6 0 2 8 3 " and is printed in bold black letters.

Find 2 transparent brown wall elements 1x2x2 with 2 top knobs.

Put 1 horizontally on the two knobs on the right, panel to the front.

Put the other one to the left, panel to the front.

Find 1 white round tile 1x1.

Put it on the rightmost knob.

The rear window is finished! Put it vertically centered on the rightmost column, panels and sticker to the right, round tile at the back.

Find 1 white brick 1x2x3.

Put it horizontally on the frontmost row, starting from the right edge.

Next, we build the small side window.

Collect the following 2 pieces:

1 white profile brick 1x2,

and 1 transparent brown wall element 1x2x2 with 2 top knobs.

Put the profile brick 1x2 horizontally on the table. Make sure the horizontal profile lines running left to right are facing the front.

Put the wall element 1x2x2 horizontally on top, panel to the front.

The small side window is finished! Put it horizontally on the front row on the third and fourth knob from the right.

Find 1 white brick 1x2x3.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 large rectangular sticker number 1. Ask a sighted person to help you find the correct sticker.

Put it on the front side surface of the brick.

The white sticker is printed with the logo of the van manufacturer: it is the brown silhouette of a deer in the mountains standing in front of a deep yellow sunset. A little blue brook runs towards the deer. At the bottom of the sticker, the word "DELUXE" is printed in all caps in grey writing.

Put this piece horizontally on the front row to the left of the small side window.

Collect the following 2 pieces:

1 transparent brown wall element 1x4x3 with 4 top knobs,

and 1 white brick 1x2x3.

Put the wall element 1x4x3 horizontally to the left of the previous piece, panel to the front.

Put the brick 1x2x3 horizontally to the left.

Collect the following 2 pieces:

1 white wedge plate 4x4 with 45° cut-off corner,

and 1 white plate 1x8.

Put the wedge plate 4x4 on the front right corner, cut-off to the left back.

Put the plate 1x8 horizontally to the left of the previous piece on the front row.

Now, we build the swing-out van side with windows.

Find 1 white plate 1x8.

Put it horizontally on the table.

Find 1 white brick 1x2x3.

Put it horizontally on the two rightmost knobs.

Find 1 white profile brick 1x2.

Put it horizontally to the left, vertical profile lines that are running from top to bottom to the front.

Find 1 transparent brown wall element 1x2x2 with 2 top knobs.

Put it horizontally on top of the previous piece, panel to the back.

Find 1 white brick 1x2x3.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 large rectangular sticker number 1. Ask a sighted person to help you find the correct sticker.

Put it on the front side surface of the brick.

The sticker has the exact same design as the previous sticker: it is printed with the logo of the van manufacturer and the word "DELUXE".

Put this piece horizontally to the left of the small window, sticker to the back.

Find 1 transparent brown wall element 1x4x3 with 4 top knobs.

Put it horizontally to the left of the previous piece, panel to the back, two knobs overhanging to the left.

Find 1 white hinge plate 1x2 - 1x2.

Turn it horizontally so that the small round hinge part is pointing to the back.

Then, mount its two right knobs underneath the structure.

Find 1 white brick 1x2x3.

Put it horizontally on the two left knobs of the hinge plate.

Collect the following 2 pieces:

1 white plate 1x8,

and 1 white hinge plate 1x2 - 1x2.

Put the plate 1x8 horizontally on top, starting from the rightmost edge.

Put the hinge plate 1x2 horizontally to the left. Make sure the small round hinge part is again at the back.

You should now be able to move the smaller and the larger part of the structure individually. If this is not possible, the hinge plates might be mounted incorrectly.

Collect the following 2 pieces:

1 white grille tile 1x2,

and 1 white flat tile 1x8.

Put the grille tile horizontally on the rightmost two knobs.

Put the flat tile 1x8 horizontally to the left.

The swing-out van side with windows is finished! Very well done! To mount it, skip 5 knobs from the left. Then put the small part of the swing-out side horizontally on the back row. The larger part can now either be closed or swung out towards the back.

Collect the following 5 pieces:

1 white plate 1x4 with 2 knobs,

1 white grille tile 1x2,

1 white flat tile 1x8,

and 2 white flat tiles 1x3.

Put the plate 1x4 with 2 knobs vertically centered on the rightmost column.

Put the grille tile 1x2 horizontally on the front row, starting from the right edge.

Put the flat tile 1x8 horizontally to the left of the previous piece.

Put the 2 flat tiles 1x3 vertically to the left, on top of the interior window frame.

Collect the following 2 pieces:

1 white left door 1x3,

and 1 white right door 1x3.

Skip 2 knobs from the left, and put the right door 1x3 horizontally on the back row. Make sure its round part is on the left, and its handle is pointing towards the back. If this does not add up, try the other door.

Repeat symmetrically at the front.

Next, we will build the front grille with license plate.

Find 1 white plate 2x6.

Put it horizontally on the table.

Collect the following 3 pieces:

2 white arched curve bricks 2x2 with 2 knobs,

and 1 bright yellow plate 2x2.

Put the plate 2x2 on the four middle knobs.

Put 1 arched curve brick to the right, knobs to the left.

Repeat symmetrically on the left.

Find 1 black plate 2x2.

Put it on top in the middle.

Collect the following 3 pieces:

1 white plate 1x4 with 2 knobs,

and 2 black grille tiles 1x2.

Put the grille tiles 1x2 horizontally next to each other on the back row.

Put the plate 1x4 horizontally in front of the previous pieces.

Continue if you want to decorate the front grille with a sticker now. If not, skip the next 3 sentences.

Find 1 small rectangular sticker number 3. Ask a sighted person to help you find the correct sticker.

Put it horizontally centered on the front row.

The sticker is identical to the first license plate sticker.

The front grille with license plate is finished! Flip it upright and mount it on the side knobs on the right side. The grille tiles are at the top and the license plate is at the bottom.

Find 2 white bricks 1x2.

Put 1 horizontally on the backmost row, starting from the left edge. You can ignore the part without knobs on the leftmost edge of the structure.

Repeat symmetrically at the front.

Find 2 white plates 1x2 with vertical clasp on long side.

Put 1 horizontally on the right knob of the previous piece and the knob to its right, clasp to the front.

Repeat symmetrically at the back.

Now, we will build the right headlight.

Collect the following 2 pieces:

1 white brick 1x1 with side knob and bottom foot,

and 1 transparent yellow smooth roof tile 1x1x⅔.

Put the brick 1x1 on the table, side knob to the left.

Put the roof tile 1x1x⅔ upright on the side knob, slope to the back.

Find 1 white one-stepped curve tile 1x2x⅔.

Put it horizontally on top, curve to the left, piece overhanging to the right.

The right headlight is finished! Great job! To mount it, put the overhanging part of the curve tile on the leftmost knob of the back row. The rest of the build is overhanging to the left.

Next, we will build the left headlight.

Collect the following 2 pieces:

1 white brick 1x1 with side knob and bottom foot,

and 1 transparent yellow smooth roof tile 1x1x⅔.

Put the brick 1x1 on the table, side knob to the left.

Put the roof tile 1x1x⅔ upright on the side knob, slope to the front.

Find 1 white one-stepped curve tile 1x2x⅔.

Put it horizontally on top, curve to the left, piece overhanging to the right.

The left headlight is finished! To mount it, put the overhanging part on the leftmost knob of the front row.

Collect the following 2 pieces:

1 white curved vehicle front 3x4x1⅔,

and 1 medium blue plate 1x2.

Put the plate 1x2 on the 2 knobs of the curved vehicle front.

Mount the curved vehicle front on the leftmost knobs, curve to the left.

Collect the following 2 pieces:

1 transparent brown windscreen 6x3x2,

and 1 black flat tile 1x6.

Put the windscreen vertically on the table, slope to the left.

Put the flat tile 1x6 vertically on top.

Mount the windscreen vertically on the left edge, slope to the left. It connects with the 2 knobs of the curved vehicle front, as well as with the leftmost knobs of the back and front row.

Next up, we will build the side mirrors.

Collect the following 2 pieces:

1 medium stone grey round plate 1x1 with side shaft,

and 1 medium stone grey smooth roof tile 1x1x⅔.

Put the round plate 1x1 on the table, shaft to the right.

Put the roof tile 1x1x⅔ on top, slope to the front.

Turn the side mirror upright so that the shaft is at the bottom and the slope is to the left. Then snap the shaft into the clasp on the front surface.

Collect the following 2 pieces:

1 medium stone grey round plate 1x1 with side shaft,

and 1 medium stone grey smooth roof tile 1x1x⅔.

Put the round plate 1x1 on the table, shaft to the left.

Put the roof tile 1x1x⅔ on top, slope to the front.

Turn the side mirror upright so that the shaft is at the bottom and the slope towards the left. Then snap the shaft into the clasp at the back side behind the windscreen.

Next, we will make the sleeping compartment. Put the van aside for now.

Find 1 dark stone grey plate 6x16.

Put it horizontally on the table.

Collect the following 3 pieces:

2 white bricks 1x12,

and 1 white brick 1x4.

Put the brick 1x4 vertically centered on the rightmost column.

Put 1 brick 1x12 horizontally on the backmost row, starting from the right.

Repeat symmetrically at the front.

Find 2 white plates 1x4 with 2 knobs.

Put 1 horizontally to the left of the previous piece.

Repeat symmetrically at the back.

Collect the following 3 pieces:

1 pale ocher yellow flat tile 2x4,

and 2 bright red flat tiles 2x4.

Put the pale ocher yellow flat tile 2x4 vertically centered on the two leftmost columns.

Put 1 bright red flat tile 2x4 horizontally to the right. Use the two back rows of the low part.

Repeat symmetrically at the front.

Find 2 bright blue small panel elements 1x4x1.

Put 1 vertically to the right of the two previous pieces, panel to the left.

Put the other one vertically to the right, panel to the right.

Find 1 white plate 6x8.

Put it horizontally on top, starting from the right edge.

Find 4 white grille tiles 1x2.

Put 2 horizontally to the left of the previous piece on the back row.

Repeat symmetrically at the front.

Next, we will make a small part.

Find 1 white plate 2x6.

Put it horizontally on the table.

Find 1 dark stone grey plate 1x6.

Put it horizontally on the front row.

Collect the following 4 pieces:

2 transparent bright orange round tiles 1x1,

and 2 white grille tiles 1x2.

Put the 2 grille tiles 1x2 horizontally on the front row in the middle.

Put the 2 round tiles 1x1 to the left and right of the previous pieces.

Now, turn this part vertically so that the grille tiles are on the left. Mount its right column underneath the left edge of the structure.

Find 2 white plates 2x4.

First, flip the structure upside down.

Put 1 horizontally on the 2 backmost rows to the right of the small part you have just mounted.

Repeat symmetrically at the front.

The sleeping compartment is finished! Excellent work! Mount it horizontally on top of the van, starting from the right edge. On the left, the compartment is overhanging above the windscreen.

Next, we build the camper van roof.

Find 1 black plate 4x4.

Put it on the table.

Find 1 white plate 4x6x⅔ with sloped sides and 4 knobs.

Skip the leftmost column, and put it vertically centered on top, knobs to the left.

Find 2 white plates 1x4 with 2 knobs.

Flip the structure upside down.

Put 1 plate 1x4 horizontally on the backmost row.

Repeat symmetrically at the front.

Find 1 white curved engine hood 6x5x2.

Flip the structure right side up again.

Put the curved engine hood on the leftmost column, knobs to the right. You will probably have to lift up the structure to mount the engine hood because it is higher than the rest.

Find 1 white flat tile 2x4.

Put it vertically on top of the top knobs.

Continue if you want to decorate the van roof with a sticker now. If not, skip the next 3 sentences.

Find 1 large rectangular sticker number 2. Ask a sighted person to help you with the sticker.

Put it horizontally on the left side surface of the van roof.

The sticker is printed with the logo of the van manufacturer again which covers the right half of the sticker. At the left bottom, the sticker is printed with the words "Caravan DELUXE" in grey writing. On the left and right side of the sticker are thin sloped blue lines.

The camper van roof is finished! Very well done! Mount it horizontally on top of the van on the left side; the lower and higher part of the roof fit perfectly into the stepped structure. The sticker is pointing to the left. If the campers want to go to bed, just take off the roof and let them snuggle up in the sleeping compartment!

Finally, we will build the 4 wheels.

Find 4 silver metallic narrow rims with hole and spokes.

Find 4 black narrow rubber tires with low profile.

Put the tires around the wheels.

Now, snap the 4 wheels on the 4 connectors at the bottom of the van, rims outwards.

The Holiday Camper Van is finished! Great job! You can take it for a spin now and discover all the handy amenities inside.

You are all done building the LEGO City Holiday Camper Van set! Very well done! It's time to pack your things into the van and go on a great camping trip! Enjoy the landscapes during the drive, stop at scenic places, have a nice outdoor meal with all amenities, and snuggle up in the van's sleeping compartment at night. The perfect camping holiday is waiting for the little family.

Enjoy!