LEGO 60276 Police Prisoner Transport 

LEGO Audio & Braille Building Instructions for the LEGO City set "Police Prisoner Transport".

The LEGO City Police are transporting the notorious crook Snake Rattler in their iconic prisoner transporter, when... BOOM! An explosion has blasted the cell free from the transporter and Clara The Criminal is dragging the cell away at high speed in her souped-up tow truck. Call in police hero Duke DeTain on his supercool black motorcycle and intercept those crooks before they get away!

The box cover shows a breathtaking car chase in LEGO City. The police transporter, shown from the side, is in the back center of the cover driving on a road from right to left. Snake Rattler is safely locked in the cell at the transporter rear, but oh no! It is on the cusp of falling off because Clara the Criminal has hijacked it with her tow truck. She is pulling the cell off the transporter and off the road at lightning speed towards the front left! The policewoman driving the truck looks desperate, there is nothing she can do. But not to worry, Duke DeTain is already chasing after the tow truck on his cool motorcycle, coming from the front right.

Open the box. This can be tricky; ask someone to help you!

The box contains 2 booklets with visual building instructions, 3 plastic bags with numbers printed on them, and a sheet with stickers. Ask a sighted person to help you find the correct bag!

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Clara the Criminal Minifigure, the Duke DeTain Minifigure, the tow truck and the police motorcycle.

Before you start building, ask a sighted person to help you sort the pieces by color. This makes finding the correct pieces even easier!

First, we will build the Clara the Criminal Minifigure.

Be careful with selecting the bricks and pieces for the Minifigures since there are 2 similar Minifigures in bag 1. If you are not sure about which piece to choose, ask a sighted person for help.

Collect the following 2 pieces:

1 black upper part of the body,

and 1 black pair of legs. (The two pairs of legs of bag 1 are identical, it makes no difference which one you use.)

Put the upper body on top of the legs.

Find 1 bright yellow head. (Clara's and Duke's heads have the same form and color; only the face prints differ. Duke's head has two faces printed on, Clara's only one. Ask a sighted person for help if you want to make sure you are using the correct head.)

Put it on top.

Find 1 titanium metallic aviator helmet. (It has two ear protectors but it doesn't have a chin protector like the other helmet from bag 1.)

Find 1 dark stone grey pair of aviator goggles.

Snap the goggles onto the helmet.

Put the helmet on the head.

The Clara the Criminal Minifigure is finished! Well done! She is wearing black pants, a mud brown belt, a black leather jacket with various straps and a shirt with dark and light grey stripes which looks just like a prisoner's uniform. Clara the Criminal has a grim look on her face. There is an x-shaped scar on her left cheek, and she is wearing a black eye mask. You can tell that she is up to no good!

Now, we will build the Duke DeTain Minifigure.

Collect the following 2 pieces:

1 earth blue and dark stone grey upper part of the body,

and 1 black pair of legs.

Put the upper body on top of the legs.

Find 1 bright yellow head. (If you want to make sure that you are using the correct head, ask a sighted person for help.)

Put it on top.

Find 1 black safety helmet. (It is rather round and has a chin protector.)

Find 1 transparent brown helmet visor.

Snap it onto the helmet.

Put the helmet on the head.

Find 1 black hairpiece with short curly hair.

You can choose to either use the helmet, or take the helmet off and put the hairpiece on Duke's head.

The Duke DeTain Minifigure is finished! Good job! He is wearing black pants and a brown leather belt. His shirt is dark blue, his golden badge is pinned onto the left side of his chest. On top, he is wearing a dark grey police vest with a chest strap and two utility pockets at the front, and a back shield at the back which is printed with the word "POLICE" in all caps in white letters. Duke's head actually has two face prints: on one side, he has a broad confident grin on his face and is wearing a flashy pair of sunglasses. The second face is friendly smiling. Duke has very thick black eyebrows.

Next, we will build the tow truck.

Find 1 black vehicle bottom 4x10 with 2 levels and 2 plates 2x2.

Put it horizontally on the table.

Find 2 bright red bearing elements 2x2 with 2 small connector pins.

Put 1 vertically underneath the 4 knobs on the right edge, connector pins to the front and back.

Repeat symmetrically on the left.

Find 1 medium stone grey plate 1x2 with angled top handle.

Put it vertically centered on the fourth column from the right, slope to the left. (This column is the first column on the lower level.)

Now, we will build the truck rear with license plate.

Find 1 black top angle plate 1x2 - 1x4 with 4 side knobs.

Put it horizontally on the table, 4 side knobs facing you.

Find 2 transparent red round tiles 1x1.

Put 1 upright on the rightmost side knob.

Put the other one upright on the leftmost side knob.

Find 1 dark stone grey flat tile 1x2.

Put it upright horizontally on the 2 middle side knobs.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 small rectangular sticker number 4. Ask a sighted person to help you find the correct sticker.

Put it upright horizontally on the previous piece.

The sticker is printed with the license plate. It is white with a bold black frame. The license number is "T Y 0 1 2 0 3" which is printed on in black letters.

The truck rear with license plate is finished! Great job! Mount it vertically on the rightmost column, side knobs and license plate sticker to the right.

Find 1 pale ocher yellow plate 1x2.

Put it vertically to the left of the previous part.

Find 2 black mudguard plates 2x2 with curved mudguard.

Put 1 on the backmost row at the right edge, 1 row and mudguard overhanging to the back.

Repeat symmetrically at the front.

Find 1 bright red brick 1x4.

Put it vertically to the left of the two previous pieces.

Find 2 bright red small panel elements 1x4x1.

Put 1 horizontally to the left of the previous piece on the backmost row, panel to the back.

Repeat symmetrically at the front.

Find 1 black and medium stone grey small steering wheel with plate 1x2.

Put it vertically centered on the fourth column from the left, steering wheel to the right. (This is the first column of the low section.)

Collect the following 2 pieces:

1 bright red brick 1x4,

and 1 pale ocher yellow plate 1x2.

Put the brick 1x4 vertically to the left of the previous piece.

Put the plate 1x2 vertically to the left of the previous piece.

Next, we will build the truck front with license plate.

Find 1 black top angle plate 1x2 - 1x4 with 4 side knobs.

Put it horizontally on the table, side knobs pointing towards you.

Find 1 dark stone grey flat tile 1x2.

Put it upright horizontally on the 2 middle side knobs.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 small rectangular sticker number 4. Ask a sighted person to help you find the correct sticker.

Put it upright horizontally on the previous piece.

The sticker again is printed with the license plate and looks exactly like the first license plate sticker. It is white with a bold black frame. The license number is "T Y 0 1 2 0 3" which is printed on in black letters.

The truck front with license plate is finished! Well done! Mount it vertically on the leftmost column, side knobs and license plate sticker to the left.

Find 1 bright red headlights plate 2x4 with 2 side knobs and wheel arches.

Put it vertically on the table, side knobs to the left.

Find 2 transparent yellow round tiles 1x1.

Put them upright on the 2 side knobs on the left side.

Mount this piece vertically on the left edge, side tiles to the left. These are the front headlights of the tow truck!

Find 1 bright red plate 1x4.

Put it vertically on the second column from the right.

Find 1 medium stone grey plate 2x2 with top hinge stub and 2 knobs.

Put it in the middle of the second and third column from the right, hinge stub to the right.

Find 2 bright red bricks 1x1 with horizontal side clasp.

Put 1 behind the previous piece on the third column from the right, clasp to the back.

Repeat symmetrically at the front.

Find 1 transparent brown hollow brick 1x2.

Put it vertically between the two previous pieces.

Find 2 black arched bricks 1x3x2 with protruding plate 1x1 and inside arch.

Put 1 horizontally on the backmost knob of the rightmost column, protruding plate and arch to the left.

Repeat symmetrically at the front.

Collect the following 2 pieces:

1 black flat tile 1x4,

and 1 transparent brown windscreen 3x4x1⅓, 36°.

Put the flat tile 1x4 vertically on the three previous pieces.

Put the windscreen 3x4x1⅓ vertically on the third column from the left, slope to the left.

Find 1 medium stone grey engine 2x2x1⅓.

Put it on the leftmost four knobs, narrow end to the right.

Next up, we will build the towing component.

Find 1 medium stone grey plate 1x4.

Put it vertically on the table.

Collect the following 2 pieces:

1 dark stone grey plate 1x2 with hinge fork on short end,

and 1 dark stone grey chain 6m with 2 knobs. (This means that this piece is 6 knobs long.)

Put the plate 1x2 vertically on the two backmost knobs, hinge fork to the back.

Put 1 knob of the chain on the frontmost knob, leave the chain and its second knob hanging.

Find 1 medium stone grey flat tile 1x4.

Put it vertically on top of the previous pieces, but leave the chain and its second knob hanging.

Collect the following 2 pieces:

1 reddish brown one-stepped curve tile 1x2x⅔,

and 1 reddish brown plate 1x2 with vertical clasp on short side.

Put the plate 1x2 vertically on the table in front of the rest of the structure, clasp to the front.

Mount the second knob of the chain on the back knob of the plate with clasp.

Put the curve tile vertically on top, curve to the front.

The towing component is finished! Well done, that was hard! Now, snap the hinge fork of the towing element on the hinge stub on the right side of the truck. Let the towing component extend towards the right.

Find 2 bright red dynamite bundles with fuse.

Snap 1 on the side clasp pointing to the front above the mudguard on the right.

Repeat symmetrically at the back.

Now, we will assemble the 4 tow truck wheels.

Let's start with the first one.

Find 1 medium stone grey small rim with cross hole.

Find 1 black small slick rubber tire.

Put the tire around the rim.

Now, find 3 more rims and 3 more tires.

Assemble the remaining 3 wheels just like the first one.

Now, snap the wheels onto the pin connectors at the bottom of the truck.

The tow truck is finished! Well done! This explosive vehicle is ready for action now. Clara the Criminal can already take it for a spin!

Next, we will build the police motorcycle.

Find 1 black motorcycle frame.

Put it horizontally on the table, horizontal wheel forks to the left, downwards bent wheel forks to the right.

Find 2 dark stone grey grille tiles 1x2.

Put 1 upright vertically on the 2 side knobs pointing to the front.

Repeat symmetrically at the back.

Find 1 black motorcycle fairing.

Continue if you want to decorate this piece with 2 stickers now. If not, skip the next 6 sentences.

Find 1 zig-zag shaped sticker number 3. Ask a sighted person to help you find the correct sticker.

Put it on the zig-zag shaped side surface of the fairing, matching the shapes.

The sticker is black at the top and white at the bottom. In the middle, it is printed with the cut-off silhouette of a golden police badge with a gold star in the middle. The badge reaches both into the black and white areas. In the white part at the bottom, the sticker is printed with the word "POLICE" in black letters, and a black horizontal line.

Find 1 zig-zag shaped sticker number 1.

Put it on the other zig-zag shaped side surface of the fairing, matching the shapes.

This sticker has the same design as the previous sticker.

Mount the motorcycle fairing horizontally on the frame, 2 top knobs to the left.

Find 1 medium stone grey handlebar with bottom shaft.

Snap the bottom shaft into the clasp sticking out towards the top in the right half of the structure, handlebars slightly bending towards the left.

Next, we make a small part.

Collect the following 2 pieces:

1 white plate 1x2 with vertical clasp on short side,

and 1 transparent blue flat tile 1x2.

Put the plate with clasp horizontally on the table, clasp to the left.

Put the flat tile 1x2 horizontally on top.

Mount this small part horizontally on the 2 top knobs of the motorcycle on the left side, clasp to the left.

Next, we will assemble the 2 motorcycle wheels.

Let's start with one.

Find 1 medium stone grey motorcycle rim with pins and spokes.

Find 1 black motorcycle tire with high profile.

Put the tire around the rim.

Find another motorcycle rim and another motorcycle tire.

Assemble the second wheel just like the first one.

The 2 motorcycle wheels are finished! Snap their pins into the 2 wheel forks of the motorcycle.

Find 1 medium stone grey pair of handcuffs.

Snap its middle onto the clasp on the left side of the motorcycle.

The police motorcycle is finished! Great job! Now Duke DeTain has the means to chase after Clara the Criminal. Don't let her get away!

Open bag number 2. You can choose to have the bricks sorted by color again. This bag contains all bricks and pieces for the Snake Rattler Minifigure, the policewoman Minifigure, and the first half of the prisoner transporter.

Now, we build the Snake Rattler Minifigure.

Be careful again about choosing the correct Minifigure parts. The heads might be particularly tricky to differentiate. If in doubt, ask a sighted person for help.

Collect the following 2 pieces:

1 black and dark brown upper part of the body,

and 1 dark brown pair of legs.

Put the upper body on top of the legs.

Find 1 bright yellow head. (The head piece for Snake Rattler only has 1 face print. The policewoman's head has two face prints. If in doubt, ask for help to find the correct piece.)

Put it on top.

Find 1 black cowboy hat.

Put it on the head.

The Snake Rattler Minifigure is finished! Well done! He has a mischievous smile on his face and brown bushy eyebrows. He is wearing a black eye patch over his right eye, and he has sideburns and a stubble. Snake Rattler is wearing dark brown pants and a black leather jacket with all kinds of straps and zippers. The back of his jacket is printed with a huge grey dollar sign. His shirt has dark and light grey stripes and 2 chest straps.

Next, we will build the policewoman Minifigure.

Collect the following 2 pieces:

1 earth blue pair of legs,

and 1 baby blue and bright yellow upper part of the body.

Put the upper body on top of the legs.

Find 1 bright yellow head. (This head has two face prints.)

Put it on top.

Find 1 dark orange and earth blue billed cap with ponytail.

Put it on top, ponytail to the back.

The policewoman Minifigure is finished! Well done! She is wearing dark blue pants, a light blue button-down shirt and a brown belt that has one utility pocket at the front and 2 at the back. The shirt has two chest pockets; her police badge is pinned onto the left one. Her radio unit is attached to one of the shirt buttons. The shirt has a black back print with the word "POLICE" in a rectangular black frame, and her hand-held walkie talkie is clipped onto the belt at the back. Her head is printed with two faces: on one side, she has a clever smile on her face. But on the other, she looks distressed and is clenching her teeth.

Next, we will build the prisoner transporter.

Find 1 black plate 2x14.

Put it horizontally on the table.

Find 1 medium stone grey plate 1x4 with ball socket on long side.

Put it vertically centered on the rightmost column, ball socket to the right.

Find 2 black corner plates 2x2.

Put 1 on the 2 back knobs of the previous piece, corner bending to the right at the back.

Repeat symmetrically on the 2 front knobs, corner bending to the right at the front.

If done correctly, 2 knobs of the 2 previous pieces are now overhanging to the right just like the ball socket. Let's consider them the rightmost column of our structure.

Find 1 medium stone grey plate 2x4 with 2 side connector pins.

Put it vertically centered to the left of the two previous pieces, connector pins to the front and back.

Find 2 dark stone grey bricks 2x4.

Put them horizontally next to each other to the left of the previous piece.

Find 1 medium stone grey plate 2x4 with 2 side connector pins.

Put it vertically centered to the left of the previous piece.

Find 1 black brick 1x4 with 4 side knobs.

Put it vertically centered on the leftmost column, side knobs to the left.

Find 1 bright blue plate 1x4.

Put it vertically on the second column from the right. This means that the ball cup and the 2 knobs sticking out towards the right remain empty.

Find 2 black mudguard plates 2x4 with middle hole.

Put 1 vertically on the plate 2x4 with 2 side connector pins on the right.

Put the other one vertically on the plate 2x4 with 2 side connector pins on the left.

Find 2 medium stone grey one-stepped plates 2x2x⅔ with 2 side knobs.

Put 1 on the leftmost edge at the back, side knobs pointing to the left.

Put the other one in front of the previous piece, side knobs to the left.

Find 2 medium stone grey plates 2x12.

Put 1 horizontally to the right of the previous piece on the 2 front rows. In this case, the frontmost row only consists of 3 knobs on the right and 1 knob on the left to connect to.

Repeat symmetrically at the back.

Now, we will build the transporter rear with license plate.

Find 1 medium stone grey plate 1x6.

Put it horizontally on the table.

Find 1 lemon yellow bottom angle plate 1x2 - 1x2 with 2 side knobs.

Put it horizontally on the 2 middle knobs, side knobs to the front.

Collect the following 4 pieces:

2 transparent red flat tiles 1x1,

and 2 transparent bright orange plates 1x1.

Put the 2 orange plates 1x1 to the left and right of the previous piece.

Put the 2 red flat tiles 1x1 on the 2 outmost knobs.

Find 1 dark stone grey flat tile 1x2.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 small rectangular sticker number 2. Ask a sighted person to help you find the correct sticker.

Put it on the flat tile.

The sticker is printed with the license plate. It is white with a bold black frame. The license number is "R H 6 0 2 7 6" which is printed on in black letters.

Mount this piece upright horizontally on the 2 side knobs pointing to the front.

The transporter rear with license plate is finished! Great job! Mount it vertically centered on the rightmost column, license plate sticker to the right. The rightmost column only consists of 2 knobs.

Collect the following 3 pieces:

2 dark stone grey flat tiles 1x6,

and 1 dark stone grey plate 2x4 with 3 holes.

Put 1 flat tile 1x6 horizontally on the backmost row, starting from the right edge.

Put the plate 2x4 horizontally in front of the previous piece, also starting from the right edge.

Put the other flat tile 1x6 horizontally on the frontmost row, again starting from the right edge.

Find 1 black round tile 2x2 with middle hole.

Put it centered on the second and third column from the right.

Collect the following 3 pieces:

2 black plates 1x2 with top tube,

and 1 black flat tile 1x4.

Put 1 plate with top tube horizontally on the backmost row to the left of the flat tile, top tube to the right.

Repeat symmetrically at the front.

Put the flat tile 1x4 vertically to the left of the two previous pieces.

Next, we will build 2 transporter side ladders.

Find 1 black top angle plate 1x2 - 2x2 with 4 side knobs.

Find 1 dark stone grey small panel element 1x2x1 with sides.

Mount its backside panel horizontally on the lower side knobs of the angle plate, bottom panel to the bottom.

Find 1 dark stone grey small panel element 1x2x1 with sides.

Mount its backside panel horizontally on the upper side knobs of the angle plate, bottom panel to the bottom.

The first transporter side ladder is finished! Mount its top plate 1x2 horizontally on the frontmost row on the fifth and sixth knob from the left, ladder overhanging to the front.

Now, let's make the second side ladder.

Find 1 black top angle plate 1x2 - 2x2 with 4 side knobs.

Find 1 dark stone grey small panel element 1x2x1 with sides.

Mount its backside panel horizontally on the lower side knobs of the angle plate, bottom panel to the bottom.

Find 1 dark stone grey small panel element 1x2x1 with sides.

Mount its backside panel horizontally on the upper side knobs of the angle plate, bottom panel to the bottom.

The second side ladder is finished! Mount its top plate 1x2 horizontally on the backmost row on the fifth and sixth knob from the left, ladder overhanging to the back.

Find 2 reddish brown plates 1x3.

Put 1 horizontally to the left of the previous part.

Repeat symmetrically at the front.

Find 1 lemon yellow plate 6x6.

Skip 2 columns from the left, and put it centered on top. If done correctly the plate should touch the 2 tubes to its right.

Find 1 lemon yellow plate 1x6.

Put it vertically centered to the left of the previous piece.

Find 1 bright blue brick 1x6.

Put it vertically centered on the leftmost column.

Collect the following 2 pieces:

1 dark stone grey plate 1x2 with ball on long side,

and 1 reddish brown plate 2x2.

Put the plate 1x2 vertically centered on the rightmost edge of the plate 6x6, ball to the right. This means that the ball is now between the two tubes at the front and back.

Put the plate 2x2 to the left of the previous piece.

Collect the following 4 pieces:

2 bright blue plates 2x3,

and 2 bright blue plates 1x2.

Put 1 plate 2x3 horizontally behind the 2 previous pieces.

Put 1 plate 1x2 horizontally to the left of the previous piece on the backmost row.

Repeat symmetrically at the front with the 2 remaining pieces.

Find 2 bright blue bricks 1x3.

Put 1 horizontally on the backmost row, starting from the right edge of the higher part.

Repeat symmetrically at the front.

Find 2 medium stone grey arched bricks 2x3 with 4 knobs.

Put 1 horizontally in front of the previous piece, arch to the left.

Put the other one horizontally in front of the previous piece, arch to the left.

Collect the following 3 pieces:

2 lemon yellow mudguard plates 3x4 with rounded square mudguard,

and 1 reddish brown plate 2x2.

Skip the leftmost column, and put 1 mudguard plate on the 2 back rows, mudguard overhanging to the back.

Put the plate 2x2 in front of the previous piece.

Put the other mudguard in front of the previous piece, mudguard overhanging to the front.

Collect the following 2 pieces:

1 bright blue left door 1x3,

and 1 bright blue right door 1x3.

Put the left door 1x3 horizontally on the front row on the right knob of the previous piece, door extending to the right, doorknob pointing outwards to the front. If this does not add up, you might have the wrong door. Try again with the other door.

Repeat symmetrically at the back.

Collect the following 3 pieces:

1 bright blue brick 1x3,

1 teal blue round brick 1x1,

and 1 black brick 1x2 with vertical hinge stub on short end.

Put the brick 1x2 with hinge stub vertically on the second column from the left at the back, hinge stub overhanging to the back.

Put the round brick 1x1 in front of the previous piece.

Put the brick 1x3 vertically in front of the previous piece.

Now, we will build the front grille with license plate.

Find 1 bright blue relief plate 2x6x⅔ with 4 raised top knobs and 4 side knobs.

Put it horizontally on the table, raised knobs and side knobs to the back.

Collect the following 3 pieces:

1 black flat tile 1x4,

and 2 bright blue smooth roof tiles 1x1x⅔.

Put the flat tile 1x4 horizontally centered on the back row.

Put 1 roof tile 1x1 to the left of the previous piece, slope to the left.

Repeat symmetrically on the right.

Find 1 lemon yellow plate 1x6.

Put it horizontally on the front row.

Find 2 transparent round plates 1x1.

Put 1 on the leftmost knob of the previous piece.

Repeat symmetrically on the rightmost knob.

Find 1 dark stone grey arched brick 1x4 with protruding plate.

Turn it horizontally so that the protruding plate is pointing to the back. Put the protruding plate centered on the front row, brick and arch overhanging to the front.

Collect the following 2 pieces:

1 dark stone grey flat tile 1x2,

and 1 small rectangular sticker number 2. (Ask a sighted person to help you find the correct sticker, or skip the sticker part.)

Put the flat tile 1x2 horizontally centered on the front row.

Put the sticker on top.

The sticker is printed with the license plate. It is identical to the first license plate sticker. It is white with a bold black frame. The license number is "R H 6 0 2 7 6" which is printed on in black letters.

Find 2 dark stone grey grille tiles 1x2.

Put them horizontally to the left and right of the flat tile.

The front grille with license plate is finished! Well done! Flip it upright, and mount it horizontally on the side knobs on the left side. The side knobs of the front grille are now pointing to the top. They are flush with the knobs to the right.

Collect the following 3 pieces:

2 transparent bright orange plates 1x1,

and 1 bright blue curve tile 2x4x⅔. (This piece is printed.)

Put 1 plate 1x1 on the backmost knob of the second column from the left.

Put the curve tile vertically in front of the previous piece on the leftmost edge, curve to the left.

This piece is printed with the golden silhouette of a police badge that has a golden star in it. Below, the word "POLICE" is printed in all caps in a cool design: the upper half of the letters is light blue, there is a bright blue horizontal line running through all letters in the middle, and the lower half of the letters is white.

Put the other plate 1x1 on the knob in front of the previous piece.

Collect the following 2 pieces:

1 bright blue right wedge tile 1x2 with curve and 45° cut,

and 1 bright blue left wedge tile 1x2 with curve and 45° cut.

Put the left wedge tile 1x2 horizontally on the previous piece, cut-off side to the front left. If this does not add up, you might have the wrong wedge tile. Try again with the other one.

Note that the left half of this piece does not connect to a knob but rather rests on a flat surface.

Repeat symmetrically at the back.

Collect the following 2 pieces:

1 dark stone grey brick 1x2 with shaft on long side,

and 1 black and medium stone grey small steering wheel with plate 1x2.

Note: you can ignore the smooth part without any knobs on the left edge in the following steps.

Put the small steering wheel 1x2 vertically on the second column from the left, skipping the frontmost knob, steering wheel to the right.

Put the brick with shaft vertically behind the previous piece, shaft to the right.

Collect the following 2 pieces:

1 bright yellow Minifigure mug,

and 1 medium stone grey pair of handcuffs.

Snap 1 end of the handcuffs onto the shaft of the previous piece.

Put the Minifigure mug on one of the two knobs to the left of the handcuffs.

Open bag number 3. You can choose to have the bricks sorted by color again. This bag contains the remaining bricks and pieces for the prisoner transporter with cell.

Find 2 white bricks 1x2x2.

Put 1 vertically on the rightmost column of the high part at the back.

Repeat symmetrically at the front.

Next, we build the push-off mechanism for the cell.

Collect the following 2 pieces:

1 dark stone grey brick 2x2,

and 1 black low profile brick 2x2x⅔.

Put the brick 2x2 on the table.

Put the low profile brick 2x2x⅔ on top.

Find 1 dark stone grey plate 3x2 with half circle and hole.

Put it vertically on top, half circle and hole to the front.

Now, we will build the push-off lever.

Collect the following 2 pieces:

1 bright yellow angled bushing 1x1 with cross axle extension 1m. (This means that the cross axle extension is 1 knob long) ,

and 1 bright blue friction connector peg 3m with asymmetric ring.

Put the angled bushing 1x1 on the table, round hole at the back running from left to right, cross axle extension pointing to the front.

Insert the longer part of the friction connector right-to-left into the round hole at the back. If done correctly, the connector is sticking out symmetrically to the left and right.

Find 2 dark stone grey technic bushings 1m. (This means that they are each 1 knob long.)

Put them on the two ends of the previous piece that are sticking out on the left and right at the back.

Find 1 bright yellow cross axle 3m. (This means that this piece is 3 knobs long.)

Insert it front-to-back into the cross axle extension.

This is the upper half of the lever: flip it upright so that the cross axle is pointing to the bottom. Then insert the cross axle top-to-bottom into the round hole on the structure.

Now we build the lower half of the lever.

Collect the following 2 pieces:

1 bright yellow angled bushing 1x1 with cross axle extension 1m,

and 1 bright blue friction connector peg 3m with asymmetric ring.

Put the angled bushing 1x1 on the table, round hole at the back running from left to right, cross axle extension pointing to the front.

Insert the longer end of the friction connector right-to-left into the round hole at the back.

Find 2 dark stone grey technic bushings 1m.

Put them on the 2 ends of the previous piece.

Now, flip the lower half of the lever upright so that the cross axle extension is pointing up. Lift up the structure, and put the cross axle extension on the cross axle from the bottom. For a tight fit, hold down the lever from the top as well.

The push-off mechanism for the cell is finished! Well done! If done correctly, you can move the lever up and down.

Mount the push-off mechanism horizontally centered on the right edge of the higher part of the transporter, on the four knobs between the two bricks 1x2x2. Make sure the push-off lever is overhanging to the right, just above the ball joint.

Next, we assemble the first of two side windows.

Find 1 transparent light blue glass for frame 1x2x2.

Find 1 white wall element 1x2x2 with window cut-out.

Snap the glass into the hollow of the wall element. Use the 2 small bumps on the glass and the 2 small notches at the top and bottom on the inside of the wall element.

Mount this side window on the frontmost row on the right edge of the higher part, panel to the front.

Now, we will make the second side window.

Find 1 transparent light blue glass for frame 1x2x2.

Find 1 white wall element 1x2x2 with window cut-out.

Assemble it just like the first window: snap the small bumps on the window glass into the small notches on the inside of the wall element.

Mount the second side window horizontally on the backmost row on the right edge of the high part, panel to the back.

Find 1 transparent light blue windscreen 2x6x2.

Put it vertically on the leftmost column, slope to the left.

Collect the following 3 pieces:

1 dark stone grey grille tile 1x2,

and 2 dark stone grey plates 1x2 with hinge fork on short end.

Put 1 plate 1x2 with hinge fork vertically on top of the previous piece at the back, hinge fork overhanging to the back.

Put the grille tile vertically in front of the previous piece.

Put the other plate with hinge fork vertically in front of the previous piece, hinge fork overhanging to the front.

Collect the following 3 pieces:

1 white brick 2x6,

and 2 medium stone grey round tiles 1x1.

Put the brick 2x6 vertically on the rightmost edge of the high part.

Put the 2 round tiles 1x1 on the two knobs to the left of the previous piece.

Find 1 earth blue plate 1x6.

Put it vertically to the right of the two previous pieces. This is the left column of the brick 2x6.

Collect the following 3 pieces:

2 transparent blue flat tiles 1x2,

and 1 dark stone grey grille tile 1x2.

Put 1 flat tile 1x2 vertically on top of the previous piece at the back.

Put the grille tile vertically in front of the previous piece.

Put the other flat tile 1x2 vertically in front of the previous piece.

Find 1 white hood plate 4x6x⅔ with 2 angled corners and 4 knobs.

Mount it vertically to the left of the previous pieces, 4 top knobs to the right.

Next, we will build the exterior rearview mirrors.

Collect the following 2 pieces:

1 black plate 1x2 with hinge stub on short side,

and 1 black ingot 1x2.

Put the plate 1x2 with hinge stub vertically on the table, hinge stub to the front.

Put the ingot 1x2 vertically on top.

Find another black plate 1x2 with hinge stub on short side, and another black ingot 1x2.

Put the plate 1x2 with hinge stub vertically on the table, hinge stub to the back.

Put the ingot vertically on top.

Snap the hinge stub of the first mirror into the hinge fork overhanging to the back at the top left of the vehicle. Fold the mirror down to use it.

Mount the second mirror symmetrically at the front hinge fork on the top left. Fold it down to use it.

Great job! You have just finished the driver's cab of the transporter.

Now, we will build the front exhaust pipe.

Collect the following 2 pieces:

1 black hinge fork with cross hole 1m,

and 1 black narrow tube with short shaft 1m.

Hold the hinge fork with cross hole so that the hinge fork is pointing to the bottom.

Insert the shaft of the tube top-to-bottom into the hole.

Find 1 black round plate 1x1 with top shaft.

Turn it upside down and insert the shaft into the previous piece.

The front exhaust pipe is finished! Well done! Snap the hinge fork onto the hinge stub pointing to the back just above the back mudguard.

Once mounted, fold the front exhaust pipe upwards.

Find 2 medium stone grey bent exhaust pipes 5½m with connector. (This means that this piece is 5½ knobs long.)

Flip 1 upright, connector at the bottom, and insert the connector front-to-back into the tube to the right of the driver's cab.

Repeat symmetrically at the back.

Next up, we will assemble the 4 wheels.

Let's start with one.

Find 1 black wide rim with hole and spokes.

Find 1 black wide rubber tire with high profile.

Put the tire around the rim.

Find another 3 tires and another 3 rims.

Assemble the remaining 3 wheels just like the first one.

Snap the 4 wheels on the connectors at the bottom of the vehicle.

Next up, we will build the prisoner cell.

Find 1 lemon yellow plate 2x6.

Put it horizontally on the table.

Find 1 bright blue plate 4x6.

Put it vertically on top, starting in the right back corner, 4 rows overhanging to the front.

Find 1 lemon yellow plate 2x6.

Put it horizontally underneath the 2 frontmost rows of the previous piece, 2 columns overhanging to the left.

Find 2 bright blue plates 1x2 with handle on long side.

Put 1 horizontally on the backmost row on the left edge, handle overhanging to the back.

Repeat symmetrically on the frontmost row.

Collect the following 2 pieces:

1 medium stone grey plate 1x4 with ball socket on long side,

and 1 bright red plate 1x4.

Put the plate 1x4 vertically centered on the second column from the left. This means it is mounted between the two previous pieces.

Put the plate 1x4 with ball socket vertically to the left of the previous piece, ball socket overhanging to the left.

Find 2 bright red round bricks 1x1.

Put 1 on the second column from the left on the second knob from the back.

Skip 2 knobs towards the front, and mount the other one symmetrically.

Find 1 bright red technic brick 1x2 with 2 technic beams 1m on long side.

Put it vertically between the two previous pieces, technic beams pointing to the left.

Find 2 bright blue bricks 1x2.

Put 1 vertically on the leftmost column at the back.

Repeat symmetrically at the front.

Find 1 bright blue brick 1x4.

Continue if you want to decorate this piece with a sticker now. If not, skip the next 3 sentences.

Find 1 rectangular sticker number 5. Ask a sighted person to help you find the correct sticker.

Put it upright horizontally on the long side surface of the brick.

The sticker is bright blue and has the word "POLICE" written on it in all caps. The upper half of the letters is light blue, and the lower half is white. A bright blue horizontal line is running through all letters in the middle.

Find another bright blue brick 1x4, and another rectangular sticker number 5.

Attach the sticker just like the first one.

Mount one brick 1x4 horizontally on the frontmost row to the right of the previous piece, sticker to the front.

Repeat symmetrically at the back.

Find 2 medium stone grey fence elements 1x4x2 with 4 knobs.

Put them horizontally on top of the 2 previous pieces.

Find 1 black flat tile 1x4.

Put it vertically on the second column from the left between the two previous pieces.

Now, we will build the back wall of the cell.

Find 2 white bricks 1x6.

Stack them on top of each other.

Find 1 bright red plate 1x4.

Put it centered on top.

The back wall of the cell is finished! Mount it vertically on the leftmost column of the cell.

Find 2 white bricks 1x3.

Put 1 horizontally on the backmost row, starting from the left edge.

Repeat symmetrically at the front.

Next, we will make 2 small parts.

Collect the following 2 pieces:

1 white brick 1x2 with 2 side knobs,

and 1 dark stone grey grille tile 1x2.

Put the grille tile upright horizontally on the side knobs of the brick.

Find another white brick 1x2 with 2 side knobs, and another dark stone grey grille tile 1x2.

Assemble the second part just like the first one.

Mount one part horizontally on the backmost row on the right edge, grille tile to the front.

Repeat symmetrically at the front, grille tile to the back.

Collect the following 3 pieces:

1 white plate 1x2,

and 2 dark stone grey arched bricks 1x1 with protruding plate.

Turn 1 brick with protruding plate horizontally so that the protruding plate is pointing to the right. Put the plate on the leftmost column on the second knob from the back, piece overhanging to the left.

Put the plate 1x2 vertically in front of the previous piece.

Mount the other brick 1x1 in front of the previous piece just like the first brick 1x1 with protruding plate.

Find 1 bright red plate 1x4.

Put it vertically centered on the leftmost column.

Collect the following 2 pieces:

1 white left door with knob hinge 1x3x4,

and 1 white right door with knob hinge 1x3x4.

Put the right door 1x3x4 vertically on the rightmost column on the backmost knob, door opening to the right, doorknob pointing to the right. If this does not add up, try again with the other door.

Repeat symmetrically at the front.

Find 2 white plates 1x6.

Put 1 horizontally on the backmost row.

Repeat symmetrically at the front.

Find 2 bright blue plates 1x2 with handle on long side.

Put 1 vertically on the leftmost column, skipping the backmost knob, handle to the right.

Put the other one vertically in front of the previous piece, handle to the right.

Find 1 white flat tile 1x6.

Put it vertically on the leftmost column.

Find 1 white plate 4x4 with 2 vertical side clasps and 10 top knobs.

Snap the 2 clasps into the handles on the left. This is the lid of the cell and you can fold it up and down as you wish.

The prisoner cell is finished! Fantastic job! Now, mount the cell on the right half of the transporter, doors to the right. The small recess at the left bottom of the prisoner cell encloses the ball joint on the transporter. Now, if you push down the push-off lever with momentum, the cell is blasted off of the transporter!

And with this, the prisoner transporter is finished! Great job! Get ready for your first arrest: catch the crook and lock them in the cell!

You have finished building the entire LEGO City Police Prisoner Transport set! Very well done! Now it is time to cut to the chase: make sure to lock Snake Rattler safely in the transporter cell. But if Clara the Criminal manages to hook the towing clasp of her tow truck onto the side handle on the front side of the cell, she might just be able to pull off the cell and free her partner in crime! Let the car chase begin!

Enjoy!