LEGO 60241 Police Dog Unit 

LEGO Audio & Braille Building Instructions for the LEGO City set  "Police Dog Unit".

 A crook is trying to break into the jewelry store to steal the precious gems. This is a job for the LEGO City Police Dog Unit. Hop behind the wheel of the powerful police car and race to the scene

The box front shows a crook that has stolen the diamond from the jewelry store. The policeman and his dog are chasing him.

Open the box. This can be tricky; ask someone to help you!

The box contains a booklet with visual building instructions and a bag of LEGO bricks.

First, we will build a policeman minifigure He has handcuffs to arrest the crook, and his dog helps him on his adventures!

Collect the following 2 pieces:

1 earth blue pair of legs,

and 1 light royal blue and bright yellow upper part of the body.

Put the upper part of the body on the legs.

The policeman wears a light blue shirt with a dark blue tie and a police badge on it. The dark blue pants are kept in place with a brown leather belt

Collect the following 2 pieces:

1 bright yellow head,

and 1 medium nougat brown hair piece.

Put them on top.

The policeman has a gritty smile on his face. He is determined to catch the thief

Find 1 medium stone grey pair of handcuffs.

Put the handcuffs in the left hand of the policeman

Find 1 medium nougat brown dog with knob.

Place the dog on the table next to the policeman.

The policeman is finished! Well done! Put him aside for now.

In the next section we will build a new minifigure. The minifigure is a crook with a crowbar and a sack in his hands

Collect the following 2 pieces:

1 white and bright yellow upper part of the body,

and 1 dark stone grey pair of legs.

Put the upper part of the body on the legs.

Collect the following 2 pieces:

1 bright yellow head,

and 1 maroon red pixie cap.

Put them on top.

Collect the following 2 pieces:

1 bright red minifigure crowbar,

and 1 medium nougat brown sack with shaft.

Put the crowbar and sack in the hands of the crook.  

The crook minifigure is finished! Well done! He wears a white prison uniform with grey stripes. He sure is up to no good, so you better watch out!

In the next section we will build the police car.

Find 1 white and medium stone grey waggon bottom 4x10 with 4 wheel arches.

Place it horizontally on the table.

Now, we will make the 4 wheels.

Collect the following 8 pieces:

4 medium stone grey wide rims with hole,

And 4 black wide rubber tyres with profile.

Insert the rims into the tyres.

Snap the wheels onto the side connectors of the waggon bottom.

Find 1 dark stone grey roof tile 2x2.

Put it on the lower part of the waggon bottom on the right edge, slope to the left.

Find 1 bright yellow brick 1x2.

Put it vertically on the table.

Find 1 black plate 1x2.

Put it vertically on top.

Put this build vertically on the lower part of the waggon bottom on the left edge.

Collect the following 2 pieces:

1 black seat 2x2x2,

and 1 black and medium stone grey small steering wheel with plate 1x2.

Put the seat to the left of the roof tile on the lower part, seatback to the right

Put the steering wheel with plate 1x2 vertically to the left of the previous piece.

Collect the following 3 pieces:

1 bright red plate 2x3,

and 2 bright blue plates 1x8.

Put the plate 2x3 horizontally on the middle two rows to the right of the seat.

Put one plate 1x8 horizontally on the frontmost row, starting from the right.

Repeat symmetrically at the back

Find 1 bright blue curve tile 2x4.

Put it vertically on the two leftmost columns, curve to the left

The curve tile is decorated with a gold police star. Police is written on it with big letters.

Find 4 bright blue profile bricks 1x2.

Put two horizontally on the frontmost row starting from the right. Make sure that the profile lines running top to bottom are facing inwards.

Repeat symmetrically at the back.

Find 2 bright blue flat tiles 1x4.

Put one horizontally on top.

Repeat symmetrically at the front

Find the following 2 pieces:

1 dark stone grey flat tile 1x4,

and 1 medium stone grey tile with bow 1x4.

Careful! These pieces have a special orientation! We will mount them on the left side of the structure.

Put the flat tile 1x4 upright vertically on the top row on the left side of the structure.

The flat tile is decorated with front lights.  

Put the tile with bow 1x4 upright vertically below the previous piece.

Find 1 transparent light blue windscreen 2x4x2.

Put it to the left of the steering wheel, slide to the left.

Find 1 lemon yellow plate 1x4.

Put it vertically on top of the previous piece.

Find 2 transparent blue flat tiles 1x2.

Put both vertically on top of the previous piece.

Find 2 medium stone grey plates 1x2 with vertical top clasp.

Careful! These pieces have a special orientation. We will mount them on the right side surface of the structure.

Put them upright horizontally on the two middle columns at the right side of the structure bottom, clasps to the top.

Find the following 3 pieces:

2 transparent red flat tiles 1x2,

and 1 dark stone grey grille tile 1x2.

Careful! These pieces have a special orientation. We will mount them on the right side surface of the structure.

Put one flat tile 1x2 upright to the back of the previous pieces.

Repeat symmetrically at the front.

Put the grille tile upright vertically below the grips of the 2 plates 1x2 with clasp.

Find 1 black fender front.

Snap its bottom bar into the vertical grips on the right side.

You are now finished building the police car. Well done. Seat the policeman behind the wheel and chase after the crook.

In the next section we will build the diamond shop.

Find 1 medium stone grey plate 4x6.

Put it horizontally on the table.

Find 3 medium nougat brown bricks 2x2.

Put them on the back two rows.

Collect the following 2 pieces:

1 reddish brown plate 1x4,

and 1 pale ocher yellow brick 1x2x2.

Put the plate 1x4 horizontally on the backmost row in the middle.

Put the brick 1x2x2 vertically to the right

Find 2 warm gold plates 1x2 with 1 knob.

Put them horizontally on top of the plate 1x4.

Find the following 2 pieces:

1 transparent light blue diamond with stick,

and 1 transparent diamond with stick.

Insert the light blue diamond into the knob of the left plate 1x2 with 1 knob, and the other diamond into the right knob.

Find 1 black plate 1x4 with 2 knobs.

Put it horizontally in front of the diamonds.

Find 1 pale ocher yellow brick 1x2x2.

Put it vertically on the leftmost column at the back.

Find 2 maroon red smooth roof tiles 1x2x⅔.

Put one vertically on the top left at the back, slope to the left.

Repeat symmetrically on the right, slope to the right.

Next, we will build the jeweler's shop window. Assembling the window can be tricky, ask someone for help if necessary.

Find 1 black frame 1x4x3.

Put it flat on the table, inner notch to the top, and top knobs to the back.

Find 1 transparent glass for frame 1x4x3.

Snap it into the window frame. The window glass has two small bumps at the top that fit perfectly into the notches on the inside of the frame

Now, flip your window up again, knobs to the top and window glass to the front. The window opens at the bottom.  

Find 1 medium stone grey bottom angle plate 1x2 - 2x2 with 4 side knobs.

Put it on top of the window in the middle, overhanging to the front, side knobs to the front.

Find 1 maroon red tile with bow 1x4.

Put it vertically on top of the window frame.

Find 1 white flat tile 2x2

Careful! This piece has a special orientation! We will mount it on the front of the structure.

Put it upright on the side knobs on the front of the structure.

The tile is printed with the logo of the jewelry store: a big light blue diamond.

You have now finished building the diamond shop and also the whole set. Nice job.

Enjoy!