LEGO 42649 Heartlake City Candy Store  

LEGO Audio & Braille Building Instructions for the LEGO Friends set "Heartlake City Candy Store".

If you would like to access the help menu to find out how to use and navigate these instructions, tap with two fingers or press key "H".

A visit to the candy store is such a sweet treat! Leo brings his little sister Alba to choose her own candy. Pluto the kitten comes along too. They meet the store owner Gigi who shows them all the sweet treats on offer. Use the scoop to select from the pick'n'mix. Or try out the giant lollipop, then see where the candy is made. Remember to wave to the cute chocolate bar and candy mascots!

On the box cover, the bright and colorful candy store stands under a sunny Heartlake City sky. The shopfront sparkles with turquoise and pink, topped by a big colorful candy-themed sign above the entrance in the middle. To the right, rows of jars and bins fill the window of the pick'n'mix section, while the left side allows a peek into the kitchen where new sweets are being made. In the shop windows directly to the left and right of the entrance there is a giant lollipop on display as well as a Guble Bubble advertisement. Leo is in front of the store, waving at Gigi. He has some money in his hand, it seems like he is ready to buy some sweet treats! Little Alba plays happily with Pluto the kitten by his side. Gigi with her shiny pink hair also stands in front of the store with a basket full of sweet treats in her hand. At the edges, the cheerful mascots shaped like a chocolate bar and a wrapped candy are smiling at everyone who passes by. Behind the store, Heartlake City’s green parkland glows in the sunshine, making this the perfect spot for a sweet adventure. But now, let's get started!

Open the box. It contains visual building instructions, 5 numbered bags and 1 sticker sheet. We will refer to the bag numbers to guide you through the building process. Please ask a sighted person to help you identify the correct bags!

The sticker sheet has 6 stickers. Some of them have identical shapes, so if you would like to find and attach the stickers yourself, these are your options: You can try to feel the outlines of the stickers and search for the longest sticker in the set, it has the size 2x4. Turn the sticker sheet so that this sticker is oriented vertically and in the bottom left corner of the sticker sheet. If you prefer, you can also ask a sighted person to orientate the sticker sheet such that the bold black line is on the left edge. We will refer to both the shape and the location of the sticker on the sticker sheet during the building process. However, of course you can also decide to skip the stickers in the building process for now or ask a sighted person to help you attach them if you like.

Carefully open bag number 1 and any small sub-bags in it. This bag contains all bricks and pieces for the Alba Minidoll, the Candy Mascot and the entrance of the candy store.

If you like, you can ask a sighted person to help you sort the pieces by color before you start building. We recommend using trays or bowls. This can make finding the correct pieces easier! However, if you would like to build without brick colors entirely, you can also ignore them or turn them off. There are different ways to sort and organize the bricks and your building process. It is up to you!

First, we will build the Alba Minidoll.

Collect the following 2 pieces:

1 medium nougat brown Minidoll head,

and 1 medium nougat brown and aqua blue small Minidoll body with skirt.

Put the Minidoll head on the body. Make sure the nose and the hands are pointing in the same direction.

Find 1 dark brown hairpiece with shoulder-length hair and fringes.

Put it on the head.

The Alba Minidoll is finished! Well done! Alba has short dark brown hair with soft waves and straight bangs framing her face. She is dressed in a light turquoise dress with a striped shirt underneath and bright blue pinafore dress on top of it. Two little front pockets add playful detail to her outfit. On her feet, she wears matching turquoise shoes that complete her cheerful look. Alba's wide brown eyes and gentle smile give her an open and friendly expression.

Now, we will build the Candy Mascot.

Collect the following 2 pieces:

1 bright yellow brick 1x2x1⅔ with 8 side knobs and 1 smooth side,

and 1 bright yellow rounded plate 1x2.

Put the rounded plate 1x2 horizontally on the table.

Put the brick 1x2x1⅔ horizontally on top, smooth side to the back.

Find 2 yellowish orange plates 1x2 with 1 knob.

Put 1 upright vertically on the 2 left side knobs.

Repeat symmetrically on the right.

Find 2 yellowish orange round tiles 1x1 with small top shaft.

Put 1 upright on the previous piece, shaft pointing to the right.

Repeat symmetrically on the left.

This is the base of the mascot's head. We will later insert the legs into the bottom surface of this build.

Next up, we will assemble the mascot legs.

Collect the following 4 pieces:

2 bright yellow rounded plates 1x2,

and 2 white flagpoles 1x1x3.

Put 1 rounded plate 1x2 vertically on the table.

Put 1 flagpole on the back knob.

Repeat with the 2 remaining pieces.

Find 2 white half-circle tiles 1x1.

Put 1 in front of one flagpole, half circle to the front.

Repeat on the other leg.

The mascot legs are finished! Well done! Insert 1 flagpole from the bottom into the left side of the mascot head base and insert the other one into the right side.

Adjust the rounded tips of the mascot feet a bit so that the toes are pointing outwards, giving the mascot a more stable stance.

Find 1 yellowish orange round curve brick 4x4 with center cut-out.

Flip it upright so that the smooth surface and cut-out are facing you. Mount it centered on the 4 side knobs pointing to the front.

Collect the following 2 pieces:

1 yellowish orange round tile 2x2,

and 1 round sticker 2x2 with orange winky face. (This is sticker number 2. On the sticker sheet, it is located at the top edge on the right.)

Put the sticker on the smooth surface of the round tile, matching its shape.

Flip the round tile upright so that the smooth surface is towards you and mount it in the cut-out of the round curve brick.

Find 2 yellowish orange domes 1½x1½ with 1 knob.

Flip it upright so that the knob of the dome is pointing to the left. Stick the dome on the small shaft that is sticking out from the right side surface of the mascot's head.

Repeat symmetrically on the left.

The Candy Mascot is finished! Great job! The candy mascot's head is a larger-than-life version of a twist-wrapped candy. It has a happy orange face and is winking at you! It has cute pink cheeks and a big smile on its face.

Next, we will build the Candy Store Entrance.

Collect the following 2 pieces:

1 beige plate 8x8,

and 1 light lavender round tile 2x2.

Put the plate 8x8 on the table. Make sure its knobs form straight rows and columns in front of you.

Put the round tile 2x2 on the front left corner.

Next, we will build a floor extension.

Collect the following 2 pieces:

1 yellowish green round tile 1x1,

and 1 beige plate 2x6 with 2 rounded corners.

Put the plate 2x6 vertically on the table, rounded corners to the left.

Put the round tile 1x1 on the backmost knob.

Find 1 yellowish green plate 2x2 with 1 knob.

Put it in front of the previous piece on the right column, 1/2 overhanging to the right.

Mount the overhanging plate of the floor extension vertically on the leftmost column of the base plate 8x8. Make sure the frontmost tip of the extension is flush with the front edge of the base plate.

Now, we will build another floor extension.

Collect the following 2 pieces:

1 yellowish green round tile 1x1,

and 1 beige plate 2x6 with 2 rounded corners.

Put the plate 2x6 horizontally on the table, rounded corners to the front.

Put the round tile 1x1 on the rightmost knob.

Find 1 yellowish green plate 2x2 with 1 knob.

Put it to the left of the previous piece on the back row, 1/2 overhanging to the back.

Mount the overhanging plate of the floor extension horizontally on the frontmost row of the base plate, making sure that its leftmost tip is flush with the front left corner of the base plate.

If done correctly, the 2 tips of the 2 floor extensions just about meet at the front left corner of the base plate 8x8.

Now, turn the structure 45° to the left until it is in a position where the base plate resembles a diamond shape. In other words, the 4 corners of the base plate should now be pointing to the front, back, left and right and the 2 floor extensions are symmetrically running towards you at an angle, meeting at the front tip of the base plate.

Collect the following 4 pieces:

2 yellowish green round tiles 1x1,

and 2 light lavender quarter-arched tiles 2x2.

Put the 2 round tiles directly behind the round tile 2x2 that we have mounted in the beginning. This means they will sit between the 2 inner corners of the plates 2x2 with 1 knob.

Put 1 quarter-arched tile 2x2 in front of the left round tile 1x1 from the previous step. This means that it will hug the left edge of the round tile 2x2.

Repeat symmetrically on the right.

Now, we will build the entrance door.

Collect the following 2 pieces:

1 transparent door for frame 1x4x6,

and 1 bright purple zig-zagged door frame 2x4.

Put the zig-zagged door frame horizontally in front of you, spikes pointing to the back.

Hold the door upright vertically in front of you, making sure that the 2 bumps on its short sides are on the left edge and the door knob is on the right edge. Snap the 2 bumps into the frame.

Find 1 white round tile 1x1. (This piece is printed.)

Make sure the door is closed and put it upright on the doorknob. It is printed with a red swirl and looks just like a peppermint swirl candy.

Find 1 bubble-shaped sticker 1x2 with "OPEN" sign. (This is sticker number 4. It is located in the very center of the sticker sheet.)

Make sure the door is still closed and put the sticker horizontally into the middle of the top half of the door.

The entrance door is finished! Well done! Mount it in its building orientation horizontally centered behind the 2 round tiles 1x1. With its slanted sides, it will fit neatly between the 2 plates 2x2 with 1 knob.

Find 2 medium azure blue corner bricks 1x2 - 1x2.

Before you mount them, turn the structure around until the front door with floor extensions is towards the back and the empty base plate corner opposite of the door is pointing towards you.

Hold 1 corner brick so that its outer corner is pointing to the back and its 2 arms are to the front left and front right.

Mount it to the right of the door frame so that its front left end touches the slanted side of the door frame. Make sure that its front right end is flush with the back right edge of the base plate.

Repeat symmetrically on the left.

Find 2 medium azure blue corner tiles 1x2 - 1x2 with cut-off corner.

Put 1 horizontally to the right of the previous piece's front right end. It should hug the leftmost bottom spike of the zig-zagged door frame.

Put the other one horizontally to the right of the previous piece, hugging the rightmost spike of the door frame.

Next up, we will build 2 bottom connection mounts.

Collect the following 6 pieces:

4 medium azure blue rounded plates 1x2,

and 2 medium azure blue plates 1x2 with horizontal clasp on short side.

Put 1 rounded plate 1x2 horizontally on the table.

Put 1 plate with clasp horizontally on top, clasp to the left.

Put 1 rounded plate 1x2 horizontally on top.

Repeat with the 3 remaining pieces to create the second bottom connection mount.

The 2 bottom connection mounts are finished! Mount 1 at an angle on the left corner knob of the base plate, 1/2 with clasp overhanging to the front left. This means that it will sit in front of the front left end of the left corner brick.

Repeat symmetrically on the right, 1/2 with clasp overhanging to the front right.

Find 2 beige plates 2x6 with 2 rounded corners.

Hold 1 horizontally, rounded corners to the front, and then turn its right tip a bit to the back to hold it at an angle.

Mount the knob of its right pointy tip underneath the previous piece, the long side of the plate touching the front right edge of the base plate 8x8.

Repeat symmetrically on the left.

Find 2 light lavender bricks 1x4.

Put 1 at an angle into the inner corner of the left corner brick, extending towards the front left. This means that its long edge at the back will touch the corner brick and the left connection mount.

Repeat symmetrically on the right.

Find 2 transparent half-circle wall elements 5x4x2.

Put 1 next to the front right edge of the door frame, half circle to the back right. It will sit on the corner brick, the back half of the connection mount and the brick 1x4 mounted to the front right of the door.

Repeat symmetrically on the left.

Now, we will build 2 round wall pillars.

Collect the following 10 pieces:

2 bright yellow round bricks 1x1,

2 yellowish green round bricks 1x1,

2 light lavender round bricks 1x1,

2 purple violet round bricks 1x1,

and 2 bright orange round bricks 1x1.

We will stack 5 round bricks each to create the 2 pillars. The order of the 5 colors is identical for the 2 pillars, so we will build them in parallel. You can use the order of the colors that we are suggesting below, but of course you can also pick your own order if you prefer.

Put the 2 purple violet round bricks next to each other on the table.

Put 1 bright orange round brick on each purple brick.

Put the 2 yellowish green round bricks on top.

Put the 2 yellow round bricks on top.

Finish the 2 pillars with the light lavender round bricks.

The 2 round wall pillars are finished! Mount 1 to the front right of the right half-circle window on the frontmost knob of the brick 1x4.

Repeat symmetrically on the left.

Now, we will build 2 top beams.

Collect the following 4 pieces:

2 medium azure blue bricks 1x6,

and 2 bright yellow rounded plates 1x2.

Put 1 brick 1x6 horizontally on the table.

Put 1 rounded plate 1x2 horizontally on the 2 middle knobs of the brick.

Repeat with the 2 remaining pieces to create the second beam.

Mount 1 centered on the right side wall with window which will connect the right round pillar with the right edge of the door frame.

Repeat symmetrically on the left.

Find 1 medium azure blue corner tile 1x2 - 1x2 with cut-off corner.

Turn it horizontally so that its cut-off corner is to the back and mount it centered on the back row of the door frame.

Find 3 teal blue round plates 1x1.

Put them on the 3 front knobs of the door frame.

The candy store entrance is finished! Well done! Of course we still need to build some interior for this area of the store as well as facade decorations. We will do so at a later point.

With this, we have finished building everything from bag number 1. Well done! We usually pack a few extra bricks pieces in each bag, so if you still have some pieces left there is no need to worry that you missed something. If you like, you can take a break now and return to the instructions later by skipping to the section introducing bag number 2. If you want to continue building right away, simply move on to the next sentence.

Open bag number 2. You can choose to have the bricks sorted by color again if you like. This bag contains all bricks and pieces for the Chocolate Bar Mascot, the Guble Bubble Window Display and the store entrance interior.

Next, we will build the Chocolate Bar Mascot.

Collect the following 2 pieces:

1 medium lilac plate 2x3,

and 1 dark brown plate 2x3 with center cut-out 1x1.

Put the plate 2x3 horizontally on the table.

Put the plate 2x3 with cut-out horizontally on top, cut-out to the front.

Find 1 white plate 1x4.

Put it vertically into the cut-out of the previous piece, 3 knobs overhanging to the front.

Find 1 medium lilac plate 2x3.

Put it horizontally underneath the 2 frontmost knobs of the previous piece, symmetrically protruding to the left and right.

This means that there should be a gap between the 2x3 area at the back and the one at the front.

Find 2 white plates 1x2 with vertical clasp on short side.

Put 1 vertically on the previous piece's rightmost column, clasp to the front.

Repeat symmetrically on the left.

Collect the following 2 pieces:

1 reddish brown plate 1x3,

and 1 medium lilac plate 2x3.

Put the plate 2x3 horizontally on the 2 frontmost rows.

Put the plate 1x3 vertically centered behind the previous piece. This means it will sit on the middle column.

Find 2 reddish brown plates 1x2 with round bushing.

Put 1 vertically to the left of the previous piece, round bushing to the front. The round bushing fits precisely into the gap in the middle of the structure.

Repeat symmetrically on the right.

Find 1 reddish brown flat tile 2x3.

Put it horizontally on the 2 backmost rows of the structure.

Find 1 sticker 2x3 with smiley face. (This is sticker number 1. It is located in the top left corner of the sticker sheet.)

Put it on top of the previous piece, matching its shape.

The sticker is brown with a happy smiley face. The 2 black eyes with white glint look friendly, the mouth is opened to a big smile, and there are 2 rosy cheeks to complete the mascot look.

Collect the following 4 pieces:

3 medium lilac flat tiles 1x2,

and 1 medium lilac plate 1x3.

Put the plate 1x3 horizontally in front of the flat tile 2x3 with sticker.

Put 1 flat tile 1x2 vertically in front of the previous piece's leftmost knob.

Put 1 flat tile 1x2 vertically to the right of the previous piece.

Put the remaining flat tile 1x2 vertically to the right of the previous piece.

Collect the following 2 pieces:

1 medium lilac quarter-circle tile 1x1,

and another medium lilac flat tile 1x2.

Put the flat tile 1x2 horizontally on the remaining row of knobs, starting from the right edge.

Put the quarter-circle tile 1x1 to the left of the previous piece, quarter circle to the back left.

Next up, we will build the feet of the chocolate bar mascot.

Collect the following 4 pieces:

2 bright yellow round plates 1x1 with side shaft,

and 2 white half-circle tiles 1x1.

Put 1 round plate with shaft on the table, shaft to the back.

Put 1 half-circle tile on top, half circle to the front, matching the plate's shape.

Repeat with the 2 remaining pieces.

Snap the shafts of the feet into the 2 clasps pointing to the front.

Find 2 bright yellow bent arms with connector peg.

Before you mount them, fold the feet of the mascot up and then flip it upright so it can stand on its feet.

Insert the connectors of the 2 arms into the 2 side bushings, one from the left and the other from the right.

The Chocolate Bar Mascot is finished! Well done! What a friendly, nay sweet little fella! With its lilac wrapper and its dark chocolatey sweetness it sure whets our appetite for some tasty chocolate!

Next, we will build the Guble Bubble window display.

Collect the following 2 pieces:

1 medium azure blue rounded plate 1x2,

and 1 light purple brick 1x2x1⅔ with 4 side knobs.

Put the rounded plate 1x2 horizontally on the table.

Put the brick 1x2x1⅔ horizontally on top, smooth side to the back.

Find another light purple brick 1x2x1⅔ with 4 side knobs.

Put it horizontally on top, smooth side to the back.

Find 1 light purple round tile 2x2.

Put it upright on the previous piece's side knobs. This means it will sit on the top half of the front side knobs.

Find 1 round sticker 2x2 with pink happy face. (This is sticker number 5. On the sticker sheet, it is located in the middle of the right edge.)

Put it on the round tile 2x2.

This pink sticker is printed with a laughing face. The eyes are closed but smiley and the mouth is open with a happy laugh. Pink cheeks round off the happy look.

Find 2 bright purple flat tiles 1x2. (These pieces are printed.)

Put 1 upright horizontally on the 2 side knobs below the round tile 2x2.

Put the other one upright horizontally below the previous piece.

They are printed with the wrappers of Guble Bubble, a Heartlake City brand of pink bubblegum! The base design of the wrapper consists of horizontal stripes in light pink and dark pink. The "Guble Bubble" lettering is light blue with dark blue outlines and located at an angle on the left side. The right side of the wrapper features a pink smiley face much like the one from the sticker we have just attached. It's a bubblegum bubble!

The Guble Bubble window display is finished! Great job! Before you mount it, fetch the candy store entrance structure. Make sure that the door is towards the back and the remaining empty corner of the base plate is pointing towards you.

Mount the Guble Bubble window display on the 2 empty knobs inside the right half-circle shop window, its stickered and printed side to the back right.

Find 2 bright yellow bricks 2x4.

Put 1 vertically at an angle to the front left of the right window with Guble Bubble display. Make sure its short edge on the front right is flush with the front right edge of the floor extension.

Repeat symmetrically on the left.

Collect the following 5 pieces:

3 lemon yellow plates 1x2 with 1 knob,

1 medium azure blue round plate 2x2 with 1 knob,

and 1 lemon yellow plate 2x2 with 1 knob.

Put the round plate 2x2 into the 1x2 cut-out of the left half-circle window and the 2 knobs next to it.

Put 1 plate 1x2 in front of the previous piece. This means it will sit on the right half of the front row of the brick 2x4.

Put 1 plate 1x2 on the outermost short edge of the right brick 2x4 that is mounted next to the right half-circle window.

Put the plate 2x2 behind the previous piece.

Put the remaining plate 1x2 behind the previous piece.

Now, we will build 3 hard-candy lollipops.

Collect the following 6 pieces:

3 beige shafts 2m with middle stop, (2m means that this piece is about 2 knobs long.)

1 transparent red energy crystal,

1 transparent bright green energy crystal,

and 1 transparent light blue energy crystal.

Hold 1 shaft upright, its ends pointing to the top and bottom.

Put 1 energy crystal on the top end of the shaft.

Repeat with the 4 remaining pieces to create 2 more lollipops.

The 3 lollipops are finished! Insert the bottom ends of their shafts into the 3 knobs of the 3 previous pieces. This means they will be mounted next to the right shop window.

Now, we will build the larger-than-life display lollipop.

Collect the following 2 pieces:

1 bright red inverted dome 2x2 with 1 knob,

and 1 bright red dome 2x2 with 1 knob.

Hold the inverted dome in your hand, opening towards the top, and put the regular dome on top. The top dome half has a regular-sized hollow knob while the inverted dome has a wider ring-like hole at the bottom.

Find 1 bright red cupcake bottom 1x1.

Put it on top of the top dome. This is the twisted-wrapper end of the giant lollipop!

Find 1 white shaft 3m.

Insert it from the top into the hollow knob of the cupcake bottom.

Now flip the structure upside down and the larger-than-life lollipop is finished!

Insert the empty shaft end into the hollow knob of the round plate 2x2 in the left half-circle window.

Next, we will make a large nougat stack.

Collect the following 2 pieces:

1 dark brown plate 2x2,

and 1 reddish brown plate 2x2 with 1 knob.

Put the plate 2x2 on the table and put the plate with 1 knob on top.

Put this nougat stack on the front left half of the brick 2x4 next to the left half-circle window.

Next, we will make 2 small nougat stacks.

Collect the following 4 pieces:

2 dark brown plates 1x1,

and 2 reddish brown flat tiles 1x1.

Put the plates 1x1 next to each other on the table.

Put 1 flat tile on each plate, matching their shapes.

Put 1 of those stacks on top of the larger version we have just mounted on the front left edge of the structure. Make sure to align their edges so they are parallel.

Put the other stack on the knob in front of the larger-than-life lollipop.

Next up, we will build the shopping basket station.

Collect the following 2 pieces:

1 bright yellow brick 2x2,

and 1 lemon yellow plate 1x2 with 1 knob.

Put the brick 2x2 on the table. Make sure its knobs form straight rows and columns in front of you.

Put the plate 1x2 horizontally on the back row.

Find another lemon yellow plate 1x2 with 1 knob.

Put it horizontally on the front row.

Find 1 yellowish orange shopping basket with handles.

Put it on top of the previous piece, handles to the left and right.

The shopping basket station is finished! Well done! Mount it at an angle on the front corner of the base plate.

Next, we will build the bubblegum dispenser.

Collect the following 2 pieces:

1 bright red curved disk 2x2 with 1 knob,

and 1 silver metallic cone brick 1x1x⅔.

Put the curved disk 2x2 on the table. Make sure its hollow knob is towards the top.

Put the cone brick on top.

Collect the following 2 pieces:

1 white connector peg 1m with knob,

and 1 bright red brick 1x1 with technic hole.

Put the brick 1x1 on top of the previous piece, its hole running from left to right.

Insert the connector peg from the left into the side hole, its knob protruding to the left.

Collect the following 3 pieces:

1 bright green round plate 1x1,

1 light purple round plate 1x1,

and 1 bright blue round plate 1x1.

Put the bright green round plate 1x1 on top of the brick 1x1.

Put the light purple round plate 1x1 on top.

Put the bright blue round plate 1x1 on top.

Collect the following 2 pieces:

1 transparent plexiglass diving helmet,

and 1 silver metallic wind-up key with tube.

Put the plexiglass diving helmet over the 3 round tiles from the previous step.

Put the wind-up key on the side knob of the connector peg.

The bubblegum dispenser is finished! Well done! Before you mount it, turn the store entrance structure around so that the door is facing you again.

Mount the bubblegum dispenser on the left front edge of the entrance door. This means that it will sit on the plate with 1 knob mounted on the splice between the base plate and the floor extension on the left side.

We have finished building everything from bag number 2! Great job! 3 more bags to go. You are probably left with a few extra bricks and pieces again that you can use or stow away as you please.

Open bag number 3. You can choose to have the bricks sorted by color again if you like. This bag contains all bricks and pieces for the facade decorations of the store entrance and the candy store sign.

Find 2 medium azure blue inverted roof tiles 1x2, 45°.

Make sure that the front door of the store entrance structure is facing you, the 2 side walls with half-circle windows extending to the back right and the back left.

Put 1 on the left half-circle window portion that is protruding to the front, using the front right knob, 1/2 with slope overhanging towards the door.

Repeat symmetrically on the right window, 1/2 with slope overhanging to the front left.

Next, we will build 2 top connection mounts.

Collect the following 6 pieces:

4 medium azure blue rounded plates 1x2,

and 2 medium azure blue plates 1x2 with horizontal clasp on short side.

Put 1 rounded plate 1x2 horizontally on the table.

Put 1 plate 1x2 horizontally on top, clasp to the right.

Put 1 rounded plate horizontally on top.

Repeat with the 2 remaining pieces to create the second connection mount.

Mount 1 connection mount behind the roof tile 1x2 we have just mounted on the right half-circle window, clasp pointing to the back right.

Repeat symmetrically on the left, clasp to the back left.

Find 2 bright yellow top angle plates 1x2 - 2x4 with 8 side knobs.

Put 1 on the 2 middle knobs of the protruding half-circle window frame, 8 side knobs overhanging to the front left.

If done correctly, its 1x2 portion aligns with the rounded plate 1x2 that is mounted on the back half of the half-circle window frame.

Repeat symmetrically on the right.

Find 4 bright yellow plates 2x2 with 1 cut-off corner.

Put 1 to the back right of the previous piece, cut-off corner to the right.

Repeat symmetrically on the front left corner of that side wall, cut-off corner to the front.

Repeat symmetrically with the 2 remaining pieces on the left side wall.

Now, we will build the holder for the store sign.

Collect the following 2 pieces:

1 teal blue plate 2x4,

and 1 teal blue plate 1x2 with handle on long side.

Put the plate 2x4 vertically on the table.

Put the plate 1x2 horizontally on the backmost row, handle to the back.

Collect the following 3 pieces:

2 bright yellow plates 1x2 with vertical top clasp,

and 1 medium azure blue rounded plate 1x2.

Put 1 plate 1x2 vertically in front of the previous piece's left half, clasp to the back.

Put the other plate 1x2 vertically to the right of the previous piece, clasp to the back.

Put the rounded plate 1x2 horizontally on the frontmost row.

Find 2 teal blue one-stepped curve tiles 1x3.

Put 1 horizontally on the right knob of the backmost row, 2/3 overhanging to the right, curve to the right.

Repeat symmetrically on the left.

Find 1 medium azure blue round plate 2x2 with 1 knob.

Put it on the 4 frontmost knobs.

The holder for the store sign is finished! Before you mount it, turn it so that the 2 curve tiles are oriented horizontally at the front edge.

Use its backmost connection point and put it on the middle round plate 1x1 that is mounted on top of the door frame, 1/2 with curve tiles overhanging to the front.

Find 1 light lavender quarter-arched plate 5x5.

Hold it horizontally so that the outer bend is at the back and its 2 ends are pointing to the front. Mount it on the back edge of the sign holder, meaning that its middle point will sit on the round plate 2x2 with 1 knob and its 2 ends will sit on the plates with cut-off corner.

Find 4 light purple one-stepped curve tiles 1x3.

Put 1 on the frontmost knob of the previous piece's right end, 2/3 extending to the back right, curve to the back right.

Put 1 behind the previous piece in the same orientation.

Repeat symmetrically on the left.

Next, we will make 2 candy decorations.

Collect the following 4 pieces:

2 light purple domes 2x2 with 1 knob,

and 2 bright purple technic balls 1m with hole.

Put 1 dome 2x2 on the table and put 1 technic ball on top.

Repeat with the 2 remaining pieces.

Put 1 candy decoration behind the 2 curve tiles on the left side wall.

Repeat symmetrically on the right side wall.

Now, we will build 2 window awnings.

Collect the following 4 pieces:

2 beige plates 1x2,

and 2 medium azure blue rounded plates 1x2.

Put 1 plate 1x2 horizontally on the table and put 1 rounded plate horizontally on top.

Repeat with the 2 remaining pieces to create the second awning base.

Find 4 teal blue curved corner pieces 2x2x1⅓ with lowered knob.

Put 1 on the right knob of the previous piece, curves overhanging to the right and to the back.

Put 1 to the left of the previous piece, curves overhanging to the left and to the back.

Repeat with the 2 remaining pieces on the other awning base.

Find 2 teal blue flat tiles 1x2.

Put 1 horizontally on the 2 previous pieces and repeat on the other awning structure.

The 2 window awnings are finished! Flip 1 90° towards you so that the flat tile 1x2 you have just mounted is facing you and the bottom surface with the connection points is towards the back. Mount it centered on the 8 side knobs pointing to the front right.

If done correctly, the curves are towards the top edge, the left and right sides as well as the front. The straight edge where the different plate edges come together is towards the bottom.

Repeat symmetrically on the left side knobs.

Next, we will build the candy store sign.

Collect the following 2 pieces:

1 lavender round plate 4x4 with middle hole,

and 1 yellowish green plate 1x2 with shaft on short side.

Put the round plate 4x4 on the table. Make sure its knobs form straight rows and columns in front of you.

Put the plate 1x2 horizontally on the left half of the second row from the back, shaft overhanging to the left.

Find another yellowish green plate 1x2 with shaft on short side.

Put it horizontally in front of the previous piece, shaft to the left.

Find 2 light lavender triangular flat tiles 1x2 - 1x2.

Turn 1 so that its outer corner is to the back right. Mount it in front of the previous piece, its front narrow tip slightly protruding to the front.

Repeat symmetrically at the back, its back narrow tip slightly protruding to the back.

Find 2 bright purple heart-shaped plates 3x3.

Turn 1 so that its pointy tip is on the front left and mount it on the back right quarter of the round plate 4x4, heart curves protruding to the right and to the back.

Put the other one in front of the previous piece, heart curves protruding to the right and to the front.

Collect the following 3 pieces:

2 bright yellow plates 1x2 with upward hook on long side,

and 1 light purple plate 1x4.

Put 1 plate with hook horizontally on the second row from the back on its left half, hook towards the back. This means it will sit on the back plate 1x2 with side shaft.

Put the other plate with hook horizontally in front of the previous piece, hook to the front.

Put the plate 1x4 vertically centered to the right of the 2 previous pieces.

Collect the following 4 pieces:

2 light purple round tiles 1x1,

and 2 light purple round tiles 2x2.

Put 1 round tile 1x1 on the column to the right of the previous piece, using the backmost knob.

Put the 2 round tiles 2x2 in front of the previous piece, meaning that they will be mounted on the 2 rightmost columns.

Put the other round tile 1x1 in front of the 2 previous pieces, mirroring the first round tile 1x1.

Find 1 bright red plate 2x4 with 2 knobs.

Put it horizontally on the 2 middle rows, starting from the left edge.

Find 1 light purple round tile 1x1.

Put it on the previous piece's left knob.

Collect the following 2 pieces:

1 white round tile 3x3,

and 1 round sticker 3x3 with candy store logo. (This is sticker number 6. It is the only sticker of this size on the sticker sheet and it is located at the bottom edge on the right.

Put the sticker on top of the round tile 3x3, matching its shape.

The white sticker shows a colorful candy store logo. In its center, there is a cheeky lollipop with a winky face and 2 heart-shaped twisted wrapper ears. Its face is surrounded by a bold turquoise ring. There are 3 bold light pink waves in the background and a few pink and turquoise bubbles floating around. Below the lollipop face there is a round peppermint swirl candy.

Put the round tile 3x3 on the right knob of the plate 2x4 with 2 knobs, its left edge touching the round tile 1x1 on the left knob.

Next up, we will build the chocolate bar of the store sign.

Collect the following 2 pieces:

1 medium stone grey rounded plate 1x4,

and 1 medium lilac plate 2x4.

Put the plate 2x4 upside down and horizontally on the table. This means its knobs should touch the table.

Put the rounded plate 1x4 horizontally on the back half of the plate 2x4.

Find another medium stone grey rounded plate 1x4.

Put it horizontally in front of the previous piece.

Collect the following 3 pieces:

2 reddish brown ingots 1x2,

and 1 medium lilac plate 2x2.

Flip the structure right side up again, keeping the horizontal orientation.

Put 1 ingot 1x2 horizontally on the left half of the back row.

Put the other ingot horizontally in front of the previous piece.

Put the plate 2x2 to the left of the 2 previous pieces.

Collect the following 2 pieces:

1 medium lilac flat tile 1x2,

and 1 medium lilac triangular flat tile 1x2 - 1x2.

Put the flat tile 1x2 vertically on the leftmost edge.

Turn the triangular flat tile so that its outer corner is at the back left, and mount it to the right of the previous piece. Its pointy end at the back should partly cover the ingot piece at the back.

The chocolate bar of the store sign is finished! To mount it, insert the back hook of the store sign from the bottom into the front left corner of the chocolate bar's bottom surface.

Adjust it so that it extends to the back right at an angle but it doesn't cover the round tile 3x3 with logo sticker.

Now, we will build the twist-wrapped candy of the store sign.

Collect the following 2 pieces:

1 medium stone grey rounded plate 1x4,

and 1 warm gold round plate 1x1 with through-hole.

Put the rounded plate 1x4 horizontally on the table.

Put the round plate 1x1 on the rightmost knob.

Collect the following 2 pieces:

1 warm gold plate 1x2 with 1 knob,

and another warm gold round plate 1x1 with through-hole.

Put the plate 1x2 horizontally to the left of the previous piece.

Put the round plate 1x1 on the leftmost knob.

Collect the following 3 pieces:

1 yellowish orange round tile 2x2,

and 2 yellowish orange half-circle tiles 1x1.

Put 1 half-circle tile 1x1 on the leftmost knob, half circle to the right.

Put the round tile 2x2 centered to the right of the previous piece, symmetrically overhanging to the front and back.

Put the other half-circle tile 1x1 on the rightmost knob, half circle to the left.

The twist-wrapped candy of the store sign is finished! To mount it, insert the front hook into the leftmost end of the bottom surface of the twist-wrapped candy. Adjust it at an angle towards the front right so it doesn't cover the store logo.

The candy store sign is finished! Well done! Flip it upright so that the 2 shafts are pointing to the bottom and the decorative elements are facing you. Snap its shafts into the 2 clasps on the sign holder we have mounted on top of the entrance door.

Find 1 black kitten figurine.

Put it on the right front edge of the right floor extension of the store entrance structure. This is Pluto, Leo's kitten! It is a pitch-black kitten with wide yellow eyes and a tiny pink tongue sticking out.

With this, we have finished building the candy store entrance area! What a difficult but also magnificent build full of fun details! The connection mounts we have mounted on the edges of the build will be used to attach the other two modules of the store that we will build later: the candy-making kitchen with cash register and the pick'n'mix department.

We have also finished building everything from bag 3. Let's continue with bag 4!

Open bag number 4. You can choose to have the bricks sorted by color again if you like. This bag contains all bricks and pieces for the Gigi Minidoll and the candy-making kitchen with cash register.

Next, we will build the Gigi Minidoll.

Collect the following 2 pieces:

1 yellowish orange and Sienna brown Minidoll upper body,

and 1 baby blue and Sienna brown pair of Minidoll legs with skirt.

Put the upper body on the legs.

Collect the following 2 pieces:

1 pink-yellow gradient wavy hairpiece with high ponytail,

and 1 Sienna brown Minidoll head.

Put the head on the body.

Put the hair on the head.

The Gigi Minidoll is finished! Well done! Gigi has long curly hair tied in a high ponytail, and it's magically translucent, shifting in a dazzling gradient from bright pink to golden yellow. She wears T-shirt with yellow and orange horizontal stripes and a necklace shaped like candies. Her outfit is rounded off with a blue skirt that has layered folds. Around her waist is a printed belt with a peppermint candy detail as a belt buckle. She is wearing gold shoes with long purple socks. Gigi’s face sparkles with metallic-colored freckles and decorative cheek spots, and her big smile with purple lipstick makes her look lively and welcoming.

Now, we will build the candy-making kitchen with cash register.

Collect the following 2 pieces:

1 beige plate 6x8,

and 1 medium azure blue brick 1x2 with vertical shaft on short side.

Put the plate 6x8 horizontally on the table.

Put the brick 1x2 horizontally on the backmost row, starting from the left edge, shaft to the left.

Find 1 medium azure blue brick 2x4.

Put it horizontally to the right of the previous piece on the backmost row, 1/2 overhanging to the back.

Find 1 medium azure blue brick 1x2 with vertical shaft on short side.

Put it horizontally to the right of the previous piece, shaft to the right.

Collect the following 2 pieces:

1 bright yellow brick 1x1,

and 1 medium azure blue brick 1x4.

Put the brick 1x4 horizontally on the row directly in front of the 3 previous pieces, starting from the left edge.

Put the brick 1x1 to the right of the previous piece.

Now, we will build 2 round wall pillars.

Collect the following 6 pieces:

2 yellowish green round bricks 1x1,

2 purple violet round bricks 1x1,

and 2 bright orange round bricks 1x1.

Like before, you can either follow our color scheme or create your own.

Put the 2 purple violet round bricks next to each other on the table.

Put the bright orange round bricks on top.

Finish the 2 pillars with the 2 yellowish green round bricks.

Mount 1 round pillar on the leftmost knob of the second row from the back. This means it will sit directly next to the overhanging side shaft.

Repeat symmetrically on the right.

Find 1 transparent wall element 1x6x5 with 6 top knobs and sides.

Put it horizontally between the 2 previous pieces, outer panel side to the back, hollow to the front.

Now, we will build the fridge.

Collect the following 2 pieces:

1 medium stone grey cupboard element 2x3x2,

and 1 transparent light blue door 3x2 with small handle.

Put the cupboard element 2x3x2 horizontally on the table, opening to the front.

Hold the door horizontally so that the handle is on the right edge, pointing towards you, and snap its left edge into the cupboard notches.

The fridge is finished! Well done! Mount it horizontally in front of the right wall pillar, starting from the right edge.

If done correctly, there are 3 empty rows in front of the fridge.

Collect the following 2 pieces:

1 medium azure blue brick 1x4,

and 1 medium azure blue brick 1x1x3.

Put the brick 1x4 horizontally to the left of the fridge's back half.

Put the brick 1x1x3 to the left of the previous piece.

Find 1 medium stone grey wall element 1x2x2 with 2 top knobs.

Put it horizontally to the left of the fridge's front half, outer panel side towards the back.

Find 1 medium azure blue brick 2x4.

Put it vertically to the left of the previous piece. This means its front edge will be flush with the front edge of the base plate, and there is 1 empty column to its left.

Find another medium azure blue brick 2x4.

Put it vertically on top of the previous piece.

Collect the following 3 pieces:

1 medium stone grey plate 2x2 with 1 knob,

and 2 medium stone grey plates 1x3 with 2 knobs.

Put 1 plate 1x3 horizontally behind the previous piece, aligning their left edges.

Put the other plate 1x3 horizontally behind the previous piece.

Put the plate 2x2 to the right of the 2 previous pieces.

Collect the following 5 pieces:

1 transparent raspberry red curve disk 2x2 with 1 knob,

and 4 transparent raspberry red round tiles 1x1.

Put the curve disk 2x2 on top of the previous piece, its outer edge bulging down.

Put the 4 round tiles on the 4 knobs to the left of the previous piece. These are the knobs of the plates 1x3 with 2 knobs from the previous step.

You have just built the stove of the kitchen!

Collect the following 3 pieces:

1 medium stone grey wall element 1x2x2 with 2 top knobs,

1 dark stone grey rounded plate 1x2,

and 1 dark orange plate 2x4.

Put the wall element 1x2x2 horizontally on the back row of the fridge, starting from the right edge, outer panel side to the back.

Put the rounded plate 1x2 horizontally in front of the previous piece.

Put the plate 2x4 vertically in front of the 4 round tiles 1x1 from the previous step, 1 row overhanging to the front.

Next, we will build the base of the weighing scale.

Collect the following 2 pieces:

1 white plate 1x2,

and 1 white plate 1x2 with 1 knob.

Put the plate 1x2 vertically on the table and put the plate with 1 knob vertically on top.

Find 1 silver metallic round plate 1x1.

Put it on top of the previous piece.

Mount the base of the weighing scale vertically on the plate 2x4 we have mounted last. Use the 2 back knobs of its left column.

Collect the following 2 pieces:

1 medium stone grey flat tile 1x1, (This piece is printed.)

and 1 white smooth roof tile 1x2x⅔. (This piece is printed too.)

Put the smooth roof tile 1x2 vertically to the left of the weighing scale base, slope to the right.

This piece is printed with a blue dial gauge with white markings and a red needle. It is the weight display of the weighing scale!

Put the flat tile 1x1 in front of the previous piece. It is printed with a grey number pad and a blue display.

Find 1 bright yellow brick 1x1.

Put it on the left knob of the wall element 1x2x2 that we have mounted on top of the fridge.

Next, we will build 2 kitchen equipment holders.

Collect the following 4 pieces:

2 bright yellow rounded plates 1x2,

and 2 bright yellow round plates 1x1.

Put 1 rounded plate 1x2 vertically on the table.

Put 1 round plate 1x1 on the back knob of the plate.

Repeat with the 2 remaining pieces.

Find 2 bright yellow plates 1x1 with horizontal side clasp.

Put 1 on the front knob of 1 equipment holder, clasp overhanging to the front.

Repeat with the other equipment holder, clasp to the front.

Find 2 bright yellow rounded plates 1x2.

Put them vertically on top of the 2 equipment holders.

The 2 kitchen equipment holders are finished! Put 1 vertically on the leftmost column, starting from the back, clasp overhanging to the front. This means it will sit on the round wall pillar.

Repeat symmetrically on the right.

Collect the following 3 pieces:

1 bright yellow plate 1x8,

and 2 light lavender round bricks 1x1.

Put the plate 1x8 horizontally on the front knobs of the kitchen equipment holders.

Put the 2 round bricks on the back knobs of the kitchen equipment holders.

Find 1 yellowish green plate 2x6 with 2 rounded corners.

Before you mount it, turn the structure around so that the window is facing you.

Put the plate horizontally centered underneath the frontmost row that is protruding from the structure, rounded corners to the front, 1 row protruding to the front.

Next up, we will build 2 flowers.

Collect the following 4 pieces:

2 purple violet flower pieces 1x1 with through-hole,

and 2 dark green round plates 1x1 with 3 small leaves.

Put the 2 round plates with leaves next to each other on the table and put 1 flower piece on each plate.

Mount the 2 flowers on the 2 middle knobs of the higher row right in front of the window, leaves pointing to the front left and front right.

Collect the following 3 pieces:

1 medium azure blue brick 1x4,

and 2 medium azure blue bricks 1x2 with vertical shaft on short side.

Put the brick 1x4 horizontally centered on top of the window.

Put 1 brick with shaft horizontally to the left of the previous piece, shaft to the left.

Repeat symmetrically on the right.

Find 1 bright yellow top angle plate 1x2 - 2x4 with 8 side knobs.

Put it horizontally centered on top of the window, side knobs to the front.

Collect the following 4 pieces:

2 bright yellow round plates 1x1,

and 2 light purple one-stepped curve tiles 1x3.

Put 1 curve tile horizontally on the right knob of the previous piece and the 2 knobs to its right, curve to the right.

Put 1 plate 1x1 to the right of the previous piece.

Repeat symmetrically on the left with the 2 remaining pieces.

Find 2 bright purple technic balls 1m with hole.

Put them on the 2 round plates 1x1 from the previous step.

Next, we will build the window awning.

Collect the following 2 pieces:

1 beige plate 1x4,

and 1 yellowish green plate 1x4.

Put the beige plate horizontally on the table and put the green plate horizontally on top.

Find 1 teal blue curved corner piece 2x2x1⅓ with lowered knob.

Put it on the previous piece's rightmost knob, curves overhanging to the right and to the back.

Collect the following 3 pieces:

another teal blue curved corner piece 2x2x1⅓ with lowered knob,

and 2 teal blue curve bricks 1x1 with protruding plate 1x1.

Put the overhanging plate of 1 curve brick 1x1 to the left of the previous piece, curve portion overhanging to the back.

Put the other curve brick 1x1 with protruding plate to the left of the previous piece in the same orientation.

Put the curved corner piece on the leftmost knob, curves to the left and to the back, mirroring the first corner piece.

Find 1 teal blue flat tile 1x4.

Put it horizontally on top of the awning structure.

The window awning is finished! Great job! Flip it 90° towards you so that the flat tile 1x4 is now facing you and the straight edge where the different plate edges come together is towards the bottom. Mount it centered on the 8 side knobs pointing to the front.

Next, we will build 4 bottles with food coloring.

Collect the following 8 pieces:

1 light purple round tile 1x1 with small top shaft,

1 transparent raspberry red nose cone 1x1,

1 transparent red nose cone 1x1,

1 bright red round tile 1x1 with small top shaft,

1 dark azure blue round tile 1x1 with small top shaft,

1 transparent light blue nose cone 1x1,

1 transparent bright green nose cone 1x1,

and 1 bright green round tile 1x1 with small top shaft.

We will be pairing similar colors with each other, but you can also choose to mix and match if you prefer.

Put the light purple round tile on the transparent raspberry red nose cone.

Put the bright red round tile on the transparent red nose cone.

Put the dark azure blue round tile on the transparent light blue nose cone.

Put the bright green round tile on the transparent bright green nose cone.

The 4 bottles with food coloring are finished! Turn the candy-making kitchen around again and mount them on the 4 middle knobs of the plate 1x8 protruding from the window.

Now, we will assemble a small nougat stack on a weighing plate.

Collect the following 2 pieces:

1 white round plate 2x2 with 1 knob,

and 1 dark brown plate 1x1.

Put the round plate 2x2 on the table and the plate 1x1 on top.

Find 1 reddish brown flat tile 1x1.

Put it on top of the previous piece, aligning their edges.

The small nougat stack on weighing plate is finished! Mount it centered on top of the weighing scale base.

The weighing scale is a staple in any candy-making kitchen, but you also need it for selling chocolate or candy that is not pre-packaged. These goods need to be weighed at the cash register and their price is then calculated based on their weight.

Now, we will build the candy melting pot.

Collect the following 2 pieces:

1 black saucepan with handle,

and 1 transparent raspberry red round tile 1x1.

Put the round tile into the saucepan. Someone is melting pink-colored sugar to make pink candy it seems!

The candy melting pot is finished! Mount it on top of the fridge on the front right knob, handle to the right.

Find 1 warm gold pair of scissors.

Hold it upright so that the shear tips are pointing to the top. Snap its middle handle into the clasp above the candy-melting pot.

The candy-making kitchen with cash register is finished! Well done! Time to cook up some tasty treats! If you want, you can connect this build to the candy store entrance now. Turn it around so that the window is facing you, and snap its right side shafts into the corresponding connection mounts on the left side of the candy store entrance.

Since this module has connection shafts on both sides, you can also attach it to the other side of the candy store entrance if you like.

With this, we have built everything from bag number 4. Great job! Only one more bag to go.

Open bag number 5. You can choose to have the bricks sorted by color again if you like. This bag contains all bricks and pieces for the Leo Minidoll and the pick'n'mix section of the store.

Next, we will build the Leo Minidoll.

Collect the following 2 pieces:

1 medium nougat brown and teal blue Minidoll upper body,

and 1 bright yellow and medium nougat brown Minidoll pair of legs with baggy Bermuda pants.

Put the upper body on the legs.

Collect the following 3 pieces:

1 reddish brown short hairpiece with side parting,

1 medium nougat brown Minidoll head,

and 1 silver metallic round tile 1x1. (This piece is printed.)

Put the head on the body.

Put the hair on the head.

Snap the round tile into Leo's left hand. It is printed with the number 5. It is a coin that Leo can use to buy candy!

The Leo Minidoll is finished! Great job! Leo has tousled brown hair styled in a side-swept look with a small tuft at the back. He wears a teal jacket with salmon pink pocket details over a white T-shirt, giving him a casual and sporty appearance. His bright yellow shorts have pockets on the sides and on the back. They match well with his light blue sneakers. Leo’s friendly smile and expressive eyebrows make him look cheerful and full of energy, ready for fun at the candy store.

Next, we will build the pick'n'mix section of the candy store. Its base layout is almost identical to the kitchen section, so you will recognize some of the building steps.

Collect the following 2 pieces:

1 beige plate 6x8,

and 1 medium azure blue brick 1x2 with vertical shaft on short side.

Put the plate 6x8 horizontally on the table.

Put the brick 1x2 horizontally on the backmost row, starting from the left edge, shaft to the left.

Find 1 medium azure blue brick 2x4.

Put it horizontally to the right of the previous piece, 1 row overhanging to the back.

Find 1 medium azure blue brick 1x2 with vertical shaft on short side.

Put it horizontally to the right of the previous piece, shaft to the right.

Find 2 bright yellow bricks 2x4.

Put them horizontally next to each other in front of the 3 previous pieces.

Now, we will build 2 round wall pillars.

Collect the following 6 pieces:

2 yellowish green round bricks 1x1,

2 purple violet round bricks 1x1,

and 2 bright orange round bricks 1x1.

Make 2 pillars with 3 bricks each like before, starting with the purple violet bricks at the bottom, followed by the bright orange bricks in the middle and the yellowish green bricks at the top.

Mount 1 round pillar on the knob next to the left side shaft and repeat symmetrically on the right. This means they will be mounted on the outer edges of the second row from the back.

Find 1 transparent wall element 1x6x5 with 6 top knobs and sides.

Put it horizontally between the 2 previous pieces, outer panel side towards the back.

Find 6 transparent panel elements 1x2x1 with back and side panels.

We will use them to make 3 open containers. Continue for detailed instructions.

Put 1 vertically in front of the previous piece's leftmost end, long panel to the left.

If done correctly, there is one empty column of knobs to the left of this piece.

Put 1 vertically to the right of the previous piece, long panel to the right. These two should now form 1 open container.

Put another 1 vertically to the right of the previous piece, long panel to the left.

Put 1 vertically to the right of the previous piece, long panel to the right.

Put another 1 vertically to the right of the previous piece, long panel to the left.

Put the last one horizontally to the right of the previous piece, long panel to the right.

Find 2 medium azure blue bricks 1x1x3.

Put 1 to the right of the previous piece on the back knob, which is also in front of the right round pillar.

Repeat symmetrically on the left.

Next, we will build 2 scoop holders.

Collect the following 4 pieces:

2 bright yellow round plates 1x1,

and 2 bright yellow rounded plates 1x2.

Put 1 rounded plate 1x2 vertically on the table.

Put 1 round plate 1x1 on the back knob of the plate.

Repeat with the 2 remaining pieces.

Find 2 bright yellow plates 1x1 with horizontal side clasp.

Put 1 on the front knob of one scoop holder build, clasp to the front.

Repeat with the remaining piece on the second scoop holder build.

Find 2 bright yellow rounded plates 1x2.

Put them vertically on top of the 2 scoop holders.

Mount 1 scoop holder vertically on the leftmost column on top of the round pillar and the brick in front of it, clasp overhanging to the front.

Repeat symmetrically on the right.

Now, we will build 3 narrow candy containers.

Collect the following 2 pieces:

1 lemon yellow plate 1x6,

and 1 transparent panel element 1x2x1 with back and side panels.

Put the plate 1x6 horizontally on the table.

Put the panel element 1x2x1 horizontally on the 2 leftmost knobs, long panel to the front.

Find another 2 transparent panel elements 1x2x1 with back and side panels.

Put them horizontally to the right of the previous piece, long panels to the front.

Mount this build horizontally centered on the third row from the front. This means it will touch the 2 bricks 2x4 at the back, creating the 3 narrow containers.

Collect the following 3 pieces:

1 bright yellow flat tile 1x8,

and 2 light lavender round bricks 1x1.

Put the 2 round bricks 1x1 on the 2 round wall pillars.

Put the flat tile 1x8 horizontally in front of the 2 previous pieces.

Collect the following 3 pieces:

1 bright yellow brick 1x4 with 4 side knobs,

and 2 medium azure blue bricks 1x2 with vertical shaft on short side.

Put the brick 1x4 horizontally centered on top of the window, side knobs to the front.

Put 1 brick 1x2 horizontally to the left of the previous piece, shaft to the left.

Repeat symmetrically on the right.

Find 1 yellowish green plate 2x6 with 2 rounded corners.

Turn the structure around so that the window with round pillars is facing you.

Put the plate horizontally centered underneath the protruding row at the front, rounded corners to the front, its front row protruding to the front.

Next, we will build 2 flowers.

Collect the following 4 pieces: